Frigidaire R-FFAD5033R1 Dehumidifier Manual

The Frigidaire R-FFAD5033R1 is a 50-pint capacity dehumidifier designed for residential use, featuring automatic humidity control, continuous drain option, washable filter, electronic controls with digital display, auto-restart function, and a 24-hour timer. It operates on 115V, 60Hz power and is intended for rooms up to 3000 sq. ft. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic control panel with digital display, washable air filter, removable water bucket with full-bucket alert, continuous drain hose connection, casters for mobility, and auto-defrost function.

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

1. Remove all packaging materials and tape.
2. Ensure unit is upright for at least 24 hours before plugging in if transported sideways.
3. Place unit in center of room, at least 12 inches from walls and furniture for proper airflow.
4. Ensure the room temperature is between 41°F (5°C) and 95°F (35°C) for optimal operation.
5. Plug power cord directly into a grounded 115V, 60Hz outlet.

WARNING! Do not use extension cords. Ensure proper clearance for air intake and exhaust.

First-Time Setup

Plug in unit; control panel will illuminate.

1. Set desired humidity: Press HUMIDITY SET button, use arrows to select 35% to 85%.
2. Select fan speed: Press FAN button to choose HIGH or LOW.
3. Set timer (optional): Press TIMER button to program on/off times.
4. Check filter: Ensure washable filter is clean and properly installed.
5. Choose drain method: Use bucket or connect drain hose for continuous draining.

CAUTION! Handle water bucket carefully to avoid spills. Do not operate without filter.

Specifications

• Model: R-FFAD5033R1
• Dehumidification Capacity: 50 pints/day (at 80°F, 60% RH)
• Recommended Room Size: Up to 3000 sq. ft.
• Water Bucket Capacity: 1.8 gallons
• Operating Temperature: 41°F to 95°F (5°C to 35°C)
• Power Requirements: 115V, 60Hz, 6.5A
• Air Flow: 165 CFM (High Speed)
• Refrigerant: R-410A
• Dimensions (HxWxD): 23.4" x 15.4" x 11.5"
• Weight: 41.9 lbs
• Noise Level: 51 dB (Low Speed)

Controls and Settings

Control Panel: POWER, HUMIDITY SET, FAN (HIGH/LOW), TIMER, FILTER ALERT, BUCKET FULL indicator.

Display: Shows current room humidity, set point, timer status, filter alert, and bucket full indicator.

Humidity Control: Set desired level (35%-85%). Unit runs until humidity reaches set point, then cycles on/off automatically. Fan Speed: HIGH for maximum moisture removal, LOW for quiet operation. Timer: Program unit to turn on/off at specific times (1-24 hours). Filter Alert: Light illuminates when filter needs cleaning. Bucket Full: Light and audible alert when bucket needs emptying.

Operation Modes

Normal Mode: Set desired humidity, fan speed. Unit runs until set point reached. Continuous Mode: Set humidity to "CONT" for continuous operation regardless of humidity level. Timer Mode: Set on/off times for energy savings. Auto Defrost: Automatically activates when coil temperature drops below 41°F; compressor pauses until coil thaws.

1. Press POWER to turn unit on.
2. Set humidity level using HUMIDITY SET and arrow buttons.
3. Select fan speed (HIGH/LOW).
4. For continuous drain, connect hose and ensure bucket is removed.
5. Unit will automatically cycle to maintain set humidity.

Tip: Close windows and doors for most efficient operation.

Maintenance & Cleaning

Unplug unit before any maintenance.

1. Clean filter every 2 weeks: Remove, wash with warm water and mild detergent, air dry completely before reinstalling.
2. Empty water bucket: When BUCKET FULL light illuminates, remove bucket, empty, and replace.
3. Clean exterior: Wipe with damp cloth; do not use harsh chemicals.
4. Clean bucket: Monthly, wash with mild detergent to prevent mold/mildew.
5. End-of-season storage: Empty bucket, clean filter, let unit run in fan-only mode for 30 minutes to dry coils, coil cord, and store upright in dry location.

WARNING! Never operate without filter. Do not immerse unit in water.

Draining Options

Bucket Drain: Standard method; empty when full (approximately every 8-12 hours at 80°F, 60% RH). Continuous Drain: For unattended operation.

1. Remove bucket from unit.
2. Connect standard garden hose (¾" diameter) to drain outlet at back of unit.
3. Route hose to floor drain, sink, or sump pump.
4. Ensure hose has downward slope without kinks.
5. Unit will drain continuously; bucket full alert will not activate.

CAUTION! Ensure continuous drain hose is properly connected to prevent leaks.

Safety Features

Auto Shut-off: Turns off compressor when bucket is full or not properly installed. Tip-over Switch: Stops operation if unit is tilted or knocked over. Auto Defrost: Protects compressor in low temperatures. Overload Protection: Built-in circuit breaker protects motor. Filter Alert: Reminds user to clean filter for optimal performance.

Regulatory Information

UL Listed: Meets UL standard 474. FCC Compliance: Class B digital device; complies with Part 15 of FCC rules. Energy Star: This model meets ENERGY STAR® guidelines for energy efficiency. For support, visit www.frigidaire.com or contact 1-800-374-4432. This product contains refrigerant R-410A. Dispose of according to local regulations.

Troubleshooting

Reset: Unplug for 5 minutes, then restart. Clean filter if performance issues persist.

Service: 1-800-374-4432; www.frigidaire.com