Frigidaire LAD704TDL2 Dehumidifier Manual

The Frigidaire LAD704TDL2 is a high-capacity dehumidifier designed for large rooms and basements, featuring a 70-pint per day removal capacity, Energy Star certification, automatic humidity control, continuous drain option, washable air filter, digital controls with humidistat, auto-restart after power interruption, full bucket alert with auto-shutoff, and low-temperature operation capability. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Digital control panel, Water collection bucket, Washable air filter, Continuous drain hose connection, Carrying handles, Power cord.

Installation & Placement

Unpack and inspect contents. Choose appropriate location.

1. Clearance: Allow at least 12-18 inches of clearance on all sides for proper airflow.
2. Level surface: Place on firm, level floor to prevent tipping and ensure proper drainage.
3. Away from walls: Keep away from walls, furniture, and curtains that could block air intake or exhaust.
4. Temperature range: Operate in temperatures between 41°F (5°C) and 90°F (32°C).
5. Power source: Plug into dedicated 115V AC, 60Hz grounded outlet.

WARNING! Do not place in closets or enclosed spaces. Ensure proper ventilation for heat dissipation.

First-Time Setup

Position dehumidifier and prepare for operation.

1. Remove packaging: Take off all tape and protective materials.
2. Install bucket: Ensure water collection bucket is properly seated and locked in place.
3. Check filter: Verify washable air filter is clean and properly installed.
4. Power on: Plug into outlet, press POWER button.
5. Set humidity: Use UP/DOWN buttons to set desired humidity level (45-50% recommended).
6. Select mode: Choose between Continuous, Auto, or Timer mode based on needs.

CAUTION! Handle with care when moving; unit is heavy when bucket contains water.

Specifications

• Model: Frigidaire LAD704TDL2
• Capacity: 70 pints per day (at 80°F/60% RH)
• Coverage Area: Up to 4,500 square feet (in moderate conditions)
• Power Requirements: 115V AC, 60Hz, 6.5A
• Water Removal: 2.9 gallons per day maximum
• Operating Temperature: 41°F to 90°F (5°C to 32°C)
• Humidity Control: 35% to 85% RH adjustable
• Bucket Capacity: 16 pints (2 gallons)
• Air Flow: 165 CFM (cubic feet per minute)
• Dimensions: 15.4" W × 11.4" D × 24.3" H
• Weight: 41.9 lbs
• Certifications: Energy Star, UL Listed

Controls and Settings

Digital control panel located on top of unit.

Control Buttons: POWER, MODE, TIMER, UP (↑), DOWN (↓), FILTER RESET

Indicator Lights: POWER, FULL BUCKET, FILTER, DEFROST

Settings: Humidity Level: Adjust from 35% to 85% RH using UP/DOWN buttons. Modes: Continuous (runs constantly), Auto (maintains set humidity), Timer (programmable on/off). Filter Reset: Press after cleaning air filter to reset maintenance indicator. Bucket Full: Light illuminates when bucket needs emptying; unit auto-shuts off.

Operation Modes

Three main operating modes for different needs.

1. Auto Mode: Unit runs until set humidity level is reached, then cycles on/off to maintain level.
2. Continuous Mode: Runs constantly regardless of humidity level (use for maximum moisture removal).
3. Timer Mode: Program unit to turn on/off at specific times (1-24 hours).
4. Defrost Cycle: Automatically activates in low temperatures to prevent coil freezing.

Tip: For normal home use, Auto mode at 45-50% humidity provides optimal comfort and efficiency.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Empty bucket: Check regularly; empty when FULL light illuminates.
2. Clean air filter: Remove and wash filter every 2-4 weeks with warm water and mild detergent.
3. Reset filter light: Press FILTER RESET button after cleaning filter.
4. Clean exterior: Wipe with soft, damp cloth; never use harsh chemicals.
5. Clean bucket: Periodically wash bucket with mild soap and water to prevent mold/mildew.
6. Check coils: Keep coils clean; vacuum gently if dusty (unplug unit first).

WARNING! Always unplug unit before performing any maintenance.

Continuous Drain Setup

For continuous operation without emptying bucket.

1. Locate drain outlet on back of unit.
2. Remove drain plug and save for storage.
3. Connect standard garden hose (¾" diameter) to drain outlet.
4. Route hose to floor drain, sump pump, or suitable drainage area.
5. Ensure hose has downward slope without kinks or loops.
6. Bucket must remain in place even when using continuous drain.

CAUTION! Ensure proper drainage to prevent water damage. Check hose regularly for clogs.

Care & Storage

Proper care extends unit life and maintains efficiency.

Regular Care: Keep unit clean, ensure proper airflow, operate within temperature range.

Off-Season Storage: 1. Unplug unit and allow to dry completely. 2. Empty and clean bucket thoroughly. 3. Clean air filter and let dry. 4. Coil drain hose if using continuous drain. 5. Store in upright position in dry, protected area. 6. Cover with breathable cloth to prevent dust accumulation.

CAUTION! Never store with water in bucket. Do not cover with plastic as it can trap moisture.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. This product meets Energy Star requirements for energy efficiency. Manufactured for Frigidaire. For support, visit www.frigidaire.com or contact 1-800-374-4432. Copyright © 2023 Frigidaire. All rights reserved.

Troubleshooting

Reset: Unplug for 5 minutes, then restart to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com