Frigidaire LAD704DUL17 Dehumidifier Manual

The Frigidaire LAD704DUL17 is a 70-pint dehumidifier designed for residential use, featuring electronic controls, a continuous drain option, automatic restart, washable air filter, and adjustable humidity settings. It operates on 115V AC, 60Hz, and is suitable for areas up to 4500 sq ft. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Storage Instructions 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Electronic control panel, 70-pint capacity tank, Continuous drain hose connection, Washable air filter, Automatic defrost, Humidity control, Full tank alert, and Carrying handles.

FeatureDescription
Electronic ControlsDigital display with touch buttons for humidity setting and timer
70-Pint CapacityRemoves up to 70 pints of moisture per day (at 80°F, 60% RH)
Continuous Drain OptionGarden hose connection for continuous operation without emptying tank
Washable Air FilterCaptures airborne particles; can be cleaned and reused
Automatic DefrostPrevents coil freezing in low temperatures
Humidity ControlAdjustable from 35% to 85% relative humidity
Full Tank AlertIndicator light and auto-shutoff when tank is full
Carrying HandlesIntegrated handles for easy relocation
Automatic RestartResumes previous settings after power interruption
Timer FunctionProgrammable 1-24 hour on/off timer

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

  1. Choose location: Place in center of room, away from walls/furniture (minimum 12 inches clearance).
  2. Check airflow: Ensure air intake and exhaust vents are unobstructed.
  3. Connect drain hose (optional): Attach standard garden hose to drain outlet for continuous drainage.
  4. Plug into grounded 115V AC outlet.

WARNING! Do not place near heat sources or in direct sunlight. Ensure proper ventilation for optimal performance.

First-Time Setup

Power on dehumidifier; follow initial setup steps.

  1. Set humidity level: Press HUMIDITY button to select desired level (recommended 45-50%).
  2. Select fan speed: Choose LOW or HIGH using FAN button.
  3. Set timer (optional): Use TIMER button to program automatic on/off times.
  4. Check drain hose: Ensure hose is properly connected if using continuous drain.

CAUTION! Handle with care; unit contains refrigerant. Do not tilt more than 45 degrees.

Specifications

Controls and Settings

Access controls via electronic panel on top of unit.

Control Panel: POWER, HUMIDITY (+/-), FAN (LOW/HIGH), TIMER (1-24 hours), FILTER ALERT reset.

Humidity: Adjust from 35% to 85% in 5% increments. Fan Speed: LOW for quiet operation, HIGH for maximum moisture removal. Timer: Set automatic start/stop times. Filter Alert: LED indicates when filter needs cleaning. Full Tank Alert: Red light and auto-shutoff when tank is full. Continuous Drain: Bypasses tank when hose is connected.

Operation Modes

Normal Mode: Set desired humidity level. Continuous Mode: Runs continuously regardless of humidity setting. Laundry Mode: Maximum dehumidification for drying clothes.

  1. Press POWER to turn on unit.
  2. Select humidity level using HUMIDITY buttons.
  3. Choose fan speed with FAN button.
  4. Monitor water collection in tank or drain hose.
  5. Empty tank when FULL light illuminates.

Tip: For best results, keep doors and windows closed during operation.

Maintenance & Cleaning

Unplug unit before performing any maintenance.

  1. Clean air filter: Remove filter monthly, wash with warm water and mild detergent, air dry completely.
  2. Empty water tank: Remove tank, pour out water, clean with mild detergent, rinse thoroughly.
  3. Clean exterior: Wipe with soft, damp cloth; do not use abrasive cleaners.
  4. Check drain hose: Ensure continuous drain hose is clear of obstructions.
  5. Reset filter alert: Press and hold FILTER button for 3 seconds after cleaning filter.

WARNING! Never operate without air filter. Do not use harsh chemicals on plastic components.

Storage Instructions

Prepare unit for extended storage.

  1. Unplug from power outlet.
  2. Empty and clean water tank thoroughly.
  3. Clean air filter and allow to dry completely.
  4. Coil drain hose (if attached) and secure.
  5. Store in upright position in dry, covered area.
  6. Cover unit to prevent dust accumulation.

CAUTION! Store in temperature-controlled environment (above 32°F).

Regulatory Information

UL Listed: Meets UL 474 safety standards. Energy Star: Certified for energy efficiency. EPA: Compliant with refrigerant regulations. Copyright © Frigidaire; trademarks of Electrolux Home Products, Inc. For support, visit www.frigidaire.com or contact 1-800-374-4432.

Troubleshooting

SymptomPossible CauseCorrective Action
Unit not startingPower issue/full tankCheck power outlet; ensure tank is empty and properly seated.
Low moisture removalDirty filter/room tempClean air filter; ensure room temperature above 65°F.
Water leakingTank/drain hoseEnsure tank is properly inserted; check drain hose connection.
Loud noiseUneven surface/fanPlace on level surface; check for obstructions in fan area.
Frost on coilsLow temperatureAutomatic defrost should activate; move to warmer area.
Filter light onDirty filterClean air filter and reset filter alert.
Continuous drain not workingHose obstructionCheck hose for kinks or blockages; ensure proper slope.

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-374-4432; www.frigidaire.com

Frigidaire LAD704DUL17 Dehumidifier Manual © - All Rights Reserved 2025