Frigidaire LAD704DUL15 Dehumidifier Manual

The Frigidaire LAD704DUL15 is a 70-pint dehumidifier designed for residential use, featuring electronic controls, a built-in humidistat, continuous drain option, auto restart, washable filter, and a full bucket alert with auto shut-off. It operates on 115V AC, 60Hz, and is ideal for spaces up to 4500 sq ft. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Storage Instructions 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Electronic control panel, Water bucket with handle and full indicator, Continuous drain hose connection, Washable air filter, Humidistat, and Power cord.

Feature	Description
Electronic Controls	Digital display for humidity level, timer, and mode selection
70-Pint Capacity	Removes up to 70 pints of moisture per day (at 60°F, 90% RH)
Built-in Humidistat	Automatically maintains desired humidity level (35%-85% range)
Continuous Drain Option	Garden hose connection for unattended operation
Auto Restart	Resumes previous settings after a power interruption
Washable Filter	Removable filter for easy cleaning
Full Bucket Alert	Indicator light and auto shut-off when bucket is full
Timer Function	Programmable 1-24 hour on/off timer
Turbo Mode	Maximum moisture removal for high humidity conditions
Power Cord Storage	Built-in compartment for cord storage

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

Clearance: Allow at least 12 inches of clearance on all sides for proper airflow.
Positioning: Place in center of room or area with highest humidity (e.g., basement, laundry room).
Level surface: Ensure unit is level to prevent water leakage.
Power source: Plug into dedicated 115V outlet; avoid extension cords.
Drain setup: For continuous drainage, attach garden hose to drain port and route to floor drain.

WARNING! Do not place near heat sources or in areas below 41°F. Ensure bucket is properly seated before operation.

First-Time Setup

Plug in unit; control panel will illuminate.

Initial run: Press POWER button to turn on; unit will start in AUTO mode.
Set humidity: Use UP/DOWN arrows to set desired humidity level (recommended 45-50%).
Timer setup: Press TIMER button to program start/stop times if needed.
Check filter: Ensure washable filter is clean and properly installed.
Test bucket alert: Fill bucket partially to verify alert light and auto shut-off function.

CAUTION! Handle bucket carefully to avoid spills. Empty bucket before first use.

Specifications

Model: Frigidaire LAD704DUL15
Capacity: 70 pints per day (at 60°F, 90% RH)
Coverage Area: Up to 4500 square feet
Operating Temperature: 41°F to 95°F
Humidity Range: 35% to 85% relative humidity
Power Requirements: 115V AC, 60Hz, 6.5A
Bucket Capacity: 16.9 pints (2 gallons)
Dimensions: 15.4" W x 11.4" D x 24.3" H
Weight: 46.3 lbs
Refrigerant: R-410A
Noise Level: 51 dB on normal setting

Controls and Settings

Control Panel: POWER, MODE, HUMIDITY UP/DOWN, TIMER, FILTER RESET, TURBO.

Display Indicators: Current humidity, Set humidity, Timer, Filter alert, Full bucket, Turbo mode.

Modes: AUTO (maintains set humidity), CONTINUOUS (runs continuously), TURBO (maximum dehumidification). Timer: Programmable 1-24 hours. Humidity Setting: Adjustable from 35% to 85%. Filter Alert: Illuminates when filter needs cleaning (reset with FILTER button).

Operation Modes

Three operational modes for different needs.

AUTO Mode: Unit cycles on/off automatically to maintain set humidity level. Recommended for most situations.
CONTINUOUS Mode: Runs continuously regardless of humidity level. Use for rapid moisture removal.
TURBO Mode: Maximum fan speed and dehumidification. Use in extremely humid conditions.

Tip: For energy efficiency, use AUTO mode with humidity set to 45-50%. Use continuous drain for unattended operation.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Daily: Check and empty water bucket as needed.
Weekly: Clean air filter: Remove, rinse with warm water, dry completely before reinstalling.
Monthly: Clean exterior with soft, damp cloth. Do not use harsh chemicals.
Seasonally: Check drain hose for clogs if using continuous drain. Clean bucket with mild detergent.
Annually: Inspect power cord for damage. Have professional service if performance declines.

WARNING! Always unplug unit before cleaning. Never immerse in water.

Storage Instructions

Proper storage extends unit life.

Clean unit thoroughly following maintenance instructions.
Empty and dry bucket completely.
Run unit in fan-only mode for 30 minutes to dry internal components.
Coil power cord and store in compartment.
Store in cool, dry place above 41°F.
Cover with breathable cloth to prevent dust accumulation.

CAUTION! Do not store with water in bucket. Ensure unit is completely dry to prevent mold.

Regulatory Information

UL Listed: Meets UL standard 474. Energy Star: Certified for energy efficiency. FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Frigidaire; trademarks of Electrolux Home Products, Inc. For support, visit www.frigidaire.com or contact 1-800-374-4432.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not turning on	No power	Check outlet; ensure plug is secure; test outlet with another device.
Not removing moisture	Low temperature	Ensure room temperature is above 41°F; move to warmer area.
Bucket full light on (empty bucket)	Bucket not seated	Remove and reinsert bucket; ensure it clicks into place.
Water leaking	Uneven surface	Level unit; check bucket for cracks; ensure drain hose is secure.
Loud noise	Loose parts/fan obstruction	Check for loose panels; ensure nothing is touching fan; clean filter.
Filter light on	Dirty filter	Clean filter as instructed; press FILTER button to reset.
Ice on coils	Low temperature	Turn off unit; allow ice to melt; move to warmer location.
Poor performance	Dirty filter/coils	Clean filter; ensure coils are clean; check for proper airflow.

Reset: Unplug for 5 minutes, then restart. If issues persist, contact support.

Service: 1-800-374-4432; www.frigidaire.com