Frigidaire LAD704DUL13 Dehumidifier Manual

The Frigidaire LAD704DUL13 is a high-capacity 70-pint dehumidifier designed for residential use, featuring electronic controls, adjustable humidity settings, continuous drain option, auto-restart function, washable air filter, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drain Options 7. Operation Modes 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Electronic control panel, 70-pint moisture removal capacity, washable filter, continuous drain port, full bucket alert, auto-defrost, and energy-saving mode.

Feature	Description
Electronic Controls	Digital display with touchpad for easy operation
Humidity Control	Adjustable from 35% to 80% relative humidity
Continuous Drain Option	Garden hose connection for automatic water removal
Auto-Restart	Resumes previous settings after power interruption
Washable Air Filter	Removable filter for easy cleaning
Full Bucket Alert	Indicator light and automatic shutoff when bucket is full
Auto-Defrost	Prevents coil freezing in low temperatures
Energy Saver Mode	Reduces energy consumption when desired humidity is reached
Timer Function	24-hour programmable on/off timer
Carry Handles	Integrated handles for easy portability

Installation

Unpack and inspect contents. Place on level surface in appropriate location.

Remove packaging materials and tape from unit.
Place dehumidifier on level floor at least 12 inches from walls and furniture.
Ensure proper airflow: Keep air intake and outlet grilles unobstructed.
Check power requirements: Use dedicated 115V, 60Hz grounded outlet.
Install drain hose (optional): Attach to continuous drain port for automatic drainage.

WARNING! Do not use extension cords. Ensure unit is upright for at least 24 hours before operation if transported on its side.

First-Time Setup

Plug in unit and configure initial settings.

Power on: Plug into grounded outlet, press POWER button.
Set desired humidity: Use UP/DOWN arrows to select humidity level (recommended 45-50%).
Select mode: Choose between Normal, Energy Saver, or Continuous operation.
Set timer (optional): Program 24-hour on/off schedule if desired.
Check filter: Ensure washable filter is properly installed.

CAUTION! Do not operate in temperatures below 41°F (5°C). Allow unit to reach room temperature before use if stored in cold conditions.

Specifications

Model: LAD704DUL13
Capacity: 70 pints per day (at 80°F, 60% RH)
Power Source: 115V AC, 60Hz, 7.0A
Operating Temperature: 41°F to 95°F (5°C to 35°C)
Water Tank Capacity: 16.9 pints (2.1 gallons)
Air Flow: 206 CFM (cubic feet per minute)
Noise Level: 51 dB on high setting
Dimensions: 15.4" W × 11.4" D × 24.3" H
Weight: 41.9 lbs
Refrigerant: R-410A

Controls and Settings

Electronic control panel with digital display and touchpad controls.

Control Panel Features: POWER button, HUMIDITY SET buttons, MODE selector (Normal/Energy Saver/Continuous), TIMER SET, FILTER CHECK indicator, FULL BUCKET indicator, CURRENT HUMIDITY display.

Settings: Humidity control (35-80% RH), 24-hour programmable timer, Energy Saver mode (compressor cycles off when set humidity reached), Continuous mode (runs continuously regardless of humidity), Auto-defrost (automatic activation below 65°F), Filter alert (indicator lights when filter needs cleaning).

Connecting Drain Options

Two drainage methods: Manual bucket emptying or continuous hose drainage.

Bucket drainage: Unit automatically shuts off when bucket is full. Remove, empty, and replace bucket.
Continuous drainage: Attach standard garden hose (¾" diameter) to drain port at back of unit. Route hose to floor drain or suitable drainage area.
Ensure hose runs downward without kinks or loops for proper water flow.

Tip: For continuous operation, use hose drainage to prevent frequent bucket emptying.

Operation Modes

Three operating modes for different needs.

Normal Mode: Runs until set humidity is reached, then cycles on/off to maintain level.
Energy Saver Mode: Compressor turns off when set humidity reached; fan continues running.
Continuous Mode: Runs continuously regardless of humidity level for maximum moisture removal.
Auto-Defrost: Automatically activates when coil temperature drops below freezing point.
Timer Function: Set unit to turn on/off at specific times (1-24 hours).

WARNING! Do not operate in standing water. Ensure unit is on dry, level surface.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Clean air filter every 2-4 weeks: Remove, wash with mild detergent, rinse, dry completely before reinstalling.
Empty and clean water bucket monthly: Use mild detergent, rinse thoroughly.
Clean exterior: Wipe with soft, damp cloth. Do not use abrasive cleaners.
End-of-season storage: Empty bucket completely, clean unit, coil, and filter. Store upright in dry location.
Check drain hose: Ensure continuous drain hose is clear of obstructions.

CAUTION! Unplug unit before cleaning. Never immerse in water or use harsh chemicals.

Regulatory Information

UL Listed. Meets U.S. safety standards. Energy Star certified. Copyright © Frigidaire. For support, visit www.frigidaire.com or contact 1-800-374-4432. This product contains refrigerant that must be recovered by certified technicians. Dispose of according to local regulations.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not running	No power/bucket full	Check power connection; empty water bucket; ensure bucket properly seated.
Poor moisture removal	Dirty filter/extreme conditions	Clean air filter; ensure room temperature above 41°F; check for closed doors/windows.
Water leakage	Improper hose connection	Check hose for kinks; ensure proper connection to drain port; check bucket for cracks.
Loud noise	Uneven surface/loose parts	Place on level surface; check for loose panels or foreign objects in fan area.
Frost on coils	Low temperature	Auto-defrost should activate; move to warmer area if temperature below 41°F.
Display not working	Power issue	Check outlet; ensure unit is plugged in; try different outlet.

Reset: Unplug for 5 minutes, then restart. Check filter indicator and clean if needed.

Service: 1-800-374-4432; www.frigidaire.com