Frigidaire LAD704DUL11 Dehumidifier Manual

The Frigidaire LAD704DUL11 is a 70-pint dehumidifier designed for residential use, featuring electronic controls, automatic restart, continuous drain option, washable filter, adjustable humidity control, and a full bucket alert with auto shut-off. It operates on 115V AC, 60Hz, and is suitable for areas up to 1400 sq. ft. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Draining Options 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, removable water bucket, washable air filter, continuous drain hose connection, casters for mobility, and humidity sensor.

FeatureDescription
Electronic ControlsDigital display with touchpad for settings
Humidity ControlAdjustable from 35% to 80% relative humidity
Automatic RestartResumes previous settings after power interruption
Full Bucket AlertIndicator light and auto shut-off when bucket is full
Continuous Drain OptionGarden hose connection for unattended operation
Washable FilterRemovable filter for easy cleaning
24-Hour TimerProgrammable on/off cycles
Turbo ModeMaximum moisture removal for high humidity
Auto DefrostPrevents coil freezing in low temperatures
Filter AlertIndicator light when filter needs cleaning

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

  1. Remove packaging: Take off all tape and protective materials.
  2. Position unit: Place at least 12 inches from walls for proper airflow.
  3. Check level: Ensure unit is level for proper bucket operation.
  4. Install drain hose (optional): Attach to continuous drain port if using.
  5. Plug into grounded 115V outlet.

WARNING! Do not place near heat sources or in direct sunlight. Ensure proper clearance for air intake and exhaust.

First-Time Setup

Plug in unit; allow to stand upright for 24 hours if transported on side.

  1. Install filter: Ensure washable filter is properly seated.
  2. Set humidity level: Press HUMIDITY button to desired setting (45-50% recommended).
  3. Select mode: Choose between Normal, Turbo, or Continuous operation.
  4. Set timer (optional): Program 24-hour on/off schedule if desired.
  5. Check bucket: Ensure empty bucket is properly installed.

CAUTION! Handle with care; unit contains refrigerant. Do not tilt or invert during operation.

Specifications

Controls and Settings

Control Panel: POWER, MODE, HUMIDITY, TIMER, FILTER RESET, TURBO.

Display Indicators: Current humidity, set point, filter alert, full bucket, timer, turbo mode.

Humidity Control: Adjust between 35% and 80% in 5% increments. Mode Selection: Normal (energy efficient), Continuous (runs until bucket full), Turbo (maximum dehumidification). Timer: Program on/off cycles in 1-hour increments up to 24 hours. Filter Reset: Press after cleaning filter to reset alert light.

Operation Modes

Normal Mode: Runs until set humidity is reached, then cycles on/off. Continuous Mode: Runs continuously regardless of humidity setting. Turbo Mode: Fan runs at highest speed for maximum moisture removal.

  1. Press POWER to turn unit on.
  2. Select MODE to choose between Normal, Continuous, or Turbo.
  3. Adjust HUMIDITY setting as needed.
  4. Monitor display for current room humidity.
  5. Unit will auto-shutoff when bucket is full (bucket light illuminates).

Tip: For fastest drying, close windows and doors in the room being dehumidified.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

  1. Clean filter: Remove and wash every 2 weeks or when filter light illuminates.
  2. Empty bucket: Regularly check and empty water collection bucket.
  3. Clean exterior: Wipe with damp cloth; do not use harsh chemicals.
  4. Check drain hose: Ensure continuous drain hose is clear of obstructions.
  5. Inspect coils: Keep evaporator and condenser coils free of dust and debris.

WARNING! Always unplug unit before performing any maintenance.

Draining Options

Bucket Drain: Manual emptying of 16-pint bucket. Continuous Drain: Connect hose to drain port for automatic draining.

Continuous Drain Setup:

  1. Remove bucket from unit.
  2. Attach 5/8" garden hose to drain port (clockwise).
  3. Route hose to floor drain, sink, or sump pump.
  4. Ensure hose has downward slope without kinks.
  5. Replace bucket (unit will not operate without bucket in place).

Note: Bucket must remain installed even when using continuous drain.

Care & Storage

For seasonal storage or when not in use for extended periods.

  1. Unplug unit and allow to dry completely.
  2. Empty and clean water bucket.
  3. Clean filter and let dry completely.
  4. Coil drain hose neatly.
  5. Store upright in dry, protected area.
  6. Cover unit to prevent dust accumulation.

CAUTION! Do not store with water in bucket. Store in temperature-controlled environment.

Regulatory Information

UL Listed: Meets UL 474 safety standards. Energy Star: Certified for energy efficiency. EPA: Compliant with refrigerant regulations. Copyright © Frigidaire; trademarks of Electrolux Home Products, Inc. For support, visit www.frigidaire.com or contact 1-800-374-4432. This product contains chemicals known to cause cancer and birth defects or other reproductive harm (California Proposition 65).

Troubleshooting

SymptomPossible CauseCorrective Action
Unit not turning onNo powerCheck outlet; ensure plug is fully inserted; test outlet with another device.
Little or no water collectionLow humidity/filterCheck room humidity; clean filter; ensure proper temperature range.
Bucket full light on (empty bucket)Bucket not seatedRemove and reinstall bucket; check for obstructions in bucket area.
Loud noise or vibrationUneven surface/fanLevel unit; check for loose parts; ensure filter is clean and properly installed.
Error code on displaySensor/system faultUnplug for 10 minutes, then restart; if persists, contact service.
Ice on coilsLow temperatureUnit has auto-defrost; move to warmer area if below 41°F.
Water leakageDrain hose/bucketCheck hose connections; ensure bucket is properly installed and not cracked.

Reset: Unplug for 10 minutes to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com

Frigidaire LAD704DUL11 Dehumidifier Manual © - All Rights Reserved 2025