Frigidaire LAD704DUL10 Dehumidifier Manual

The Frigidaire LAD704DUL10 is a 70-pint dehumidifier designed for residential use, featuring electronic controls, auto-restart, continuous drain capability, washable filter, and adjustable humidity settings. It operates on 115V/60Hz power and includes a built-in humidistat, 24-hour timer, and full bucket alert with auto-shutoff. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic control panel, washable air filter, removable water bucket with handle, continuous drain port, humidistat, 24-hour timer, and auto-restart function.

Installation

Unpack and inspect contents. Place on level surface in area to be dehumidified.

1. Remove all packaging materials and tape.
2. Position unit: Allow at least 12 inches clearance on all sides for proper airflow.
3. Install filter: Ensure washable filter is properly seated in front grille.
4. Check bucket: Ensure water bucket is securely in place.
5. Plug into grounded 115V outlet.

WARNING! Do not use extension cords. Ensure proper ventilation around unit.

First-Time Setup

Plug in unit; control panel will illuminate.

1. Set humidity level: Press HUMIDITY button to select desired setting (45-50% recommended).
2. Select fan speed: Choose LOW for quiet operation or HIGH/TURBO for maximum dehumidification.
3. Set timer (optional): Press TIMER to program automatic on/off times.
4. Check drain options: Use bucket or connect continuous drain hose.

CAUTION! Operate only at temperatures above 41°F (5°C). Do not block air intake or exhaust.

Specifications

• Model: LAD704DUL10
• Capacity: 70 pints per day (at 60°F, 60% RH)
• Power: 115V, 60Hz, 7.5A
• Coverage: Up to 4,500 sq. ft. (depending on conditions)
• Water Bucket Capacity: 16 pints
• Noise Level: 51 dB on low speed
• Refrigerant: R-410A
• Dimensions: 15.4" W × 11.4" D × 24.3" H
• Weight: 46.3 lbs
• Certifications: Energy Star, UL Listed

Controls and Settings

Control Panel: POWER, HUMIDITY, FAN SPEED (LOW/HIGH/TURBO), TIMER, FILTER RESET.

Display Indicators: Current humidity, set humidity, fan speed, timer, filter alert, full bucket, defrost.

Humidity Control: Adjust between 35% and 85% in 5% increments. Fan Speed: LOW for quiet operation, HIGH for normal, TURBO for maximum moisture removal. Timer: Program 1-24 hours for automatic start/stop. Filter Reset: Press after cleaning filter to reset reminder light. Auto Defrost: Automatically activates when coil temperature drops below freezing.

Connecting Drain Hose

For continuous operation without emptying bucket.

1. Turn off and unplug unit.
2. Remove water bucket from unit.
3. Attach 5/8" ID garden hose to drain port (thread clockwise).
4. Route hose to floor drain, sink, or outdoors (downward slope required).
5. Replace bucket (unit will not operate without bucket in place).
6. Plug in and turn on unit.

Tip: Ensure hose has no kinks or upward loops that could trap water.

Operation Modes

Multiple operating modes for different needs.

1. Normal Mode: Set desired humidity level; unit cycles on/off automatically.
2. Continuous Mode: Set humidity to lowest setting (35%) for constant operation.
3. Turbo Mode: Maximum fan speed for fastest moisture removal.
4. Timer Mode: Program unit to run during specific hours.
5. Auto Defrost: Unit automatically defrosts coil when needed (compressor pauses).
6. Laundry Drying: Use in closed room with wet laundry to accelerate drying.

WARNING! Do not operate in temperatures below 41°F (5°C). Allow unit to warm up if moved from cold storage.

Maintenance

Regular maintenance ensures optimal performance and longevity.

1. Clean filter every 2 weeks: Remove, wash with warm soapy water, dry completely.
2. Empty bucket regularly or use continuous drain.
3. Clean exterior: Wipe with damp cloth, then dry.
4. Clean condenser coils annually with soft brush.
5. Store properly: Empty all water, clean thoroughly, cover, store upright.

Care & Cleaning

Unplug before cleaning. Never immerse unit in water.

Cleaning Steps:

1. Washable filter: Remove monthly, clean with mild detergent, rinse, air dry completely.
2. Water bucket: Empty and clean with mild detergent monthly to prevent mold.
3. Exterior: Wipe with soft, damp cloth. Do not use abrasive cleaners.
4. Coils: Gently vacuum condenser coils every 3 months.

CAUTION! Do not use chemical cleaners on bucket. Ensure all parts are completely dry before reassembly.

Regulatory Information

FCC Compliance: This device complies with Part 15 of FCC Rules. UL Listed: Meets safety standards. Energy Star: Meets energy efficiency guidelines. Refrigerant: Contains R-410A. For technical support, contact Frigidaire at 1-800-374-4432 or visit www.frigidaire.com. This product should be recycled according to local regulations.

Troubleshooting

Reset: Unplug for 10 minutes to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com