Frigidaire LAD504TDL4 Dehumidifier Manual

The Frigidaire LAD504TDL4 is a 50-pint capacity dehumidifier designed for residential use, featuring an Energy Star rating, electronic controls, automatic shut-off, continuous drain option, washable filter, and adjustable humidity settings. It operates on 115V, 60Hz power. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drain Hose 7. Operating the Dehumidifier 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Electronic control panel, removable water bucket, continuous drain port, washable air filter, caster wheels for mobility, and humidity sensor.

Feature	Description
Electronic Controls	Digital display with touchpad for humidity and fan settings
50-Pint Capacity	Removes up to 50 pints of moisture per day (at AHAM conditions)
Automatic Shut-Off	Turns off when bucket is full or removed
Continuous Drain Option	Garden hose connection for unattended operation
Washable Filter	Captures airborne particles; can be cleaned and reused
Adjustable Humidity	Set desired humidity level from 35% to 85%
Energy Star Certified	Meets energy efficiency guidelines
Caster Wheels	Easy mobility between rooms
Auto Restart	Resumes previous settings after a power interruption
Bucket Full Indicator	Light alerts when bucket needs emptying

Installation

Unpack and inspect contents. Place on a level, stable floor.

Position the unit: Allow at least 12-18 inches of clearance on all sides for proper airflow.
Install the filter: Ensure the washable filter is securely in place.
Check the bucket: Ensure the water collection bucket is correctly inserted.
Plug into a grounded 115V outlet.

WARNING! Do not use an extension cord. Ensure the outlet is properly grounded. Do not operate in temperatures below 41°F (5°C).

First-Time Setup

Plug in the dehumidifier; the control panel will illuminate.

Set the desired humidity: Use the UP/DOWN buttons to select a level between 35% and 85%.
Select fan speed: Choose between HIGH or LOW fan setting.
For continuous drainage: Attach a standard garden hose (not included) to the drain port at the back.
Press the POWER button to start dehumidification.

CAUTION! Always handle the unit with care. Do not tilt or turn upside down.

Specifications

Model: Frigidaire LAD504TDL4
Dehumidification Capacity: 50 pints per day (at 80°F, 60% RH)
Power Source: 115V, 60Hz, 6.5A
Energy Star: Yes
Operating Temperature: 41°F to 95°F (5°C to 35°C)
Water Bucket Capacity: 1.8 gallons
Air Flow: High/Low settings
Noise Level: Approx. 51 dB on High setting
Dimensions (HxWxD): 24.4" x 15.4" x 11.3"
Weight: 41.9 lbs

Controls and Settings

Access all functions via the electronic control panel on top of the unit.

Control Panel: POWER, HUMIDITY SET (+/-), FAN SPEED (HIGH/LOW), FILTER RESET indicator, BUCKET FULL indicator.

Humidity Control: Set desired level from 35% to 85%. The unit will cycle on/off to maintain this level. Fan Speed: HIGH for maximum moisture removal, LOW for quieter operation. Filter Alert: FILTER RESET light illuminates when the air filter needs cleaning. Auto Shut-Off: Unit stops when bucket is full; BUCKET FULL light turns on.

Connecting Drain Hose

For continuous operation without emptying the bucket.

Turn off and unplug the dehumidifier.
Remove the bucket.
Connect a standard 5/8" inner diameter garden hose to the drain port at the back.
Route the hose to a floor drain or suitable outlet. Ensure hose has a downward slope.
Replace the bucket. The unit will now drain continuously.

Tip: Ensure the hose is not kinked or blocked. The drain port is gravity-fed.

Operating the Dehumidifier

Designed for easy, automatic operation.

Power On: Press POWER. The display will show current room humidity.
Set Humidity: Use +/- buttons to select target humidity. The compressor will run until this level is reached.
Select Fan Speed: Press FAN button to toggle between HIGH and LOW.
Bucket Full: When the bucket is full, the unit will stop and the indicator light will turn on. Empty the bucket and reinsert to resume.
Continuous Drain: If hose is connected, unit will run continuously without stopping for bucket emptying.
Auto Defrost: In cooler temperatures, the unit may enter a defrost cycle automatically; this is normal.

WARNING! Do not operate without the filter or bucket properly installed. Empty bucket promptly to prevent overflow.

Maintenance & Cleaning

Unplug the unit before any maintenance.

Cleaning the Air Filter: Remove the filter every two weeks or as needed. Rinse with warm water and let air dry completely before reinstalling. Press and hold the FILTER RESET button for 3 seconds to reset the alert light.
Cleaning the Bucket: Empty and clean the bucket with a mild detergent periodically to prevent mold/mildew.
Cleaning the Exterior: Wipe the cabinet with a soft, damp cloth. Do not use harsh chemicals or abrasives.
End-of-Season Storage: Empty and dry the bucket completely. Clean the filter. Coil the drain hose (if used). Store in a dry place.

CAUTION! Never immerse the unit in water. Do not use gasoline or solvents for cleaning.

Regulatory Information

This appliance complies with FCC Part 15 Subpart B. This device may not cause harmful interference and must accept any interference received. Copyright © Frigidaire. Frigidaire is a trademark of AB Electrolux. For support, visit www.frigidaire.com or contact customer service at 1-800-374-4432.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dehumidifier does not start	No power / Bucket not seated	Ensure unit is plugged in; check outlet; ensure bucket is fully inserted.
Little or no water collection	Low humidity / Cold room / Filter dirty	Set lower humidity level; ensure room temp is above 41°F; clean the air filter.
Unit runs but stops quickly	Desired humidity reached	This is normal cycling. Unit will restart when humidity rises.
Bucket full light is on (bucket not full)	Float switch obstructed	Check for debris under the bucket; ensure bucket is level and seated correctly.
Unusual noise or vibration	Unit not level / Loose parts	Place on a level surface; check for loose panels or foreign objects inside.
Error code on display (e.g., E1, E2)	Sensor fault / System error	Unplug for 10 minutes, then restart. If code persists, contact service.

Reset: Unplug for 10 minutes to reset the electronic controls.

Service: 1-800-374-4432; www.frigidaire.com