Frigidaire LAD504DUL13 Dehumidifier Manual

The Frigidaire LAD504DUL13 is a 50-pint capacity dehumidifier designed for medium to large rooms, featuring automatic humidity control, continuous drain option, washable air filter, 24-hour timer, electronic controls with digital display, auto-restart function, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Drainage Options 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, water tank with full indicator, continuous drain hose connection, washable air filter, casters for mobility, and handle for portability.

Feature	Description
Capacity	50 pints per day (at 60°F, 90% RH)
Humidity Control	Automatic humidity sensor with adjustable setpoint (35%-85%)
Water Tank	Removable 1.8-gallon bucket with full indicator and auto-shutoff
Continuous Drain	Garden hose connection for continuous operation
Air Filter	Washable mesh filter for dust and particle removal
Timer	24-hour programmable on/off timer
Display	Digital display showing humidity level and settings
Auto-Restart	Resumes previous settings after power interruption
Energy Efficiency	Energy Star certified for reduced power consumption
Mobility	Four casters and top handle for easy movement

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

Choose location: Place in center of room away from walls/furniture for optimal airflow.
Clearance: Allow at least 12 inches clearance on all sides, especially air intake and exhaust.
Level surface: Ensure unit is level to prevent water leakage and proper operation.
Power connection: Plug directly into grounded 120V outlet; avoid extension cords.
Drain setup: Install drain hose if using continuous drainage (hose not included).

WARNING! Do not place near heat sources or in direct sunlight. Ensure proper ventilation around unit.

First-Time Setup

Plug in unit; wait for display to initialize.

Set humidity level: Press HUMIDITY button to select desired level (45-50% recommended).
Select fan speed: Choose LOW for quiet operation or HIGH for maximum dehumidification.
Set timer (optional): Program 24-hour timer for automatic on/off cycles.
Check filter: Ensure washable filter is clean and properly installed.
Test operation: Unit should start automatically when humidity exceeds setpoint.

CAUTION! Handle water tank carefully when full. Empty before moving unit.

Specifications

Model: Frigidaire LAD504DUL13
Capacity: 50 pints per day (at AHAM conditions: 60°F, 90% RH)
Coverage Area: Up to 1500 square feet
Water Tank Capacity: 1.8 gallons (removable)
Operating Temperature: 41°F to 95°F
Power Requirements: 115V, 60Hz, 4.5A
Air Flow: 165 CFM (cubic feet per minute)
Noise Level: 51 dB on low speed
Dimensions: 15.4" W × 11.4" D × 24.3" H
Weight: 41.9 lbs
Certifications: Energy Star, ETL listed

Controls and Settings

Access controls via electronic panel on top of unit.

Control Panel: POWER button, HUMIDITY adjustment (+/-), FAN SPEED (LOW/HIGH), TIMER, FILTER RESET indicator, CONTINUOUS mode.

Humidity Control: Adjust between 35% and 85% relative humidity. Fan Speed: LOW for quiet operation, HIGH for maximum moisture removal. Timer: Program on/off cycles in 1-hour increments up to 24 hours. Continuous Mode: Operates continuously regardless of humidity level (for very damp conditions). Filter Alert: LED indicator lights when filter needs cleaning. Auto Defrost: Automatically activates when coil temperature drops below 41°F.

Operation Modes

Automatic: Unit runs when humidity exceeds setpoint, stops when below. Continuous: Runs constantly until manually turned off. Laundry Dry: High fan speed for faster drying in laundry areas.

For normal use: Set humidity to 45-50% and fan to AUTO.
For very damp areas: Use CONTINUOUS mode or set humidity to 35%.
For energy savings: Set humidity to 50-55% and use LOW fan speed.
For unoccupied spaces: Use TIMER to run only during specific hours.

Tip: Close windows and doors for most efficient operation.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Empty water tank: Daily or as needed when FULL indicator lights.
Clean air filter: Every 2-4 weeks; wash with warm water and mild detergent.
Clean exterior: Wipe with damp cloth; never use harsh chemicals.
Clean water tank: Monthly with mild detergent to prevent mold/mildew.
Check drain hose: Ensure continuous drain hose is clear of obstructions.
Off-season storage: Clean thoroughly and store in dry location.

WARNING! Always unplug unit before cleaning. Do not immerse in water.

Drainage Options

Bucket: Manual emptying when FULL light illuminates. Continuous: Connect 5/8" ID garden hose (not included) to drain port.

Care & Storage

Unplug and empty completely before storage. Clean all components and allow to dry. Store upright in original box or covered in dry location.

CAUTION! Do not store with water in tank. Protect from freezing temperatures.

Regulatory Information

ETL listed to UL standard 474. Energy Star certified. Copyright © Frigidaire. For support, visit www.frigidaire.com or contact 1-800-374-4432. This product contains refrigerant that must be properly disposed of by qualified personnel.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not running	Power issue/humidity setting	Check power connection; ensure outlet works; adjust humidity setting lower.
Water not collecting	Low humidity/temperature	Room humidity may be below setpoint; ensure room temperature above 41°F.
Full light on but tank not full	Float switch stuck	Remove and reinstall tank; check for obstructions in tank well.
Unit freezing up	Low temperature	Auto defrost should activate; move to warmer area if below 41°F.
Loud noise	Loose parts/fan obstruction	Check for loose panels; ensure nothing blocking fan or air intake.
Filter light on	Dirty filter	Clean washable air filter; press FILTER RESET button.
Error codes on display	Sensor issues	Unplug for 10 minutes, then restart; if persists, contact service.

Reset: Unplug for 10 minutes to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com