Frigidaire Gallery FGAC5044W10 Dehumidifier Manual

The Frigidaire Gallery FGAC5044W10 is a 50-pint dehumidifier designed for medium to large rooms, featuring electronic controls, automatic humidity sensing, continuous drain option, washable filter, auto-restart, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drainage 7. Operation Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, humidity sensor, washable air filter, removable water bucket, continuous drain port, casters for mobility.

Feature	Description
Electronic Controls	Digital display with touchpad for humidity setting and mode selection
Automatic Humidity Sensing	Maintains desired humidity level automatically
Continuous Drain Option	Garden hose connection for continuous drainage
Washable Air Filter	Removable filter for easy cleaning
Full Bucket Alert	Indicator light and auto shut-off when bucket is full
Auto-Restart	Resumes previous settings after power interruption
Energy Efficient	Energy Star certified for lower power consumption
24-Hour Timer	Programmable on/off timer
Turbo Mode	Maximum moisture removal for high humidity conditions
Casters	Four wheels for easy room-to-room mobility

Installation

Unpack and inspect contents. Place on level surface.

Remove all packaging materials and tape.
Place dehumidifier on a flat, level surface with at least 12 inches clearance on all sides.
Ensure the unit is positioned away from walls, furniture, and curtains for proper airflow.
Install the water bucket by sliding it into place until it clicks.
Plug into a dedicated 120V AC outlet.

WARNING! Do not use extension cords. Ensure proper ventilation around the unit.

First-Time Setup

Power on dehumidifier; set initial preferences.

Plug in the unit: The control panel will illuminate.
Set desired humidity: Use the UP/DOWN buttons to select humidity level (35%-85%).
Select mode: Choose between Normal, Turbo, or Continuous operation.
Set timer (optional): Program 24-hour on/off schedule if desired.
Check filter: Ensure washable filter is properly installed.

CAUTION! Allow unit to stand upright for 24 hours if transported on its side.

Specifications

Model: FGAC5044W10
Capacity: 50 pints per day (at 60°F, 60% RH)
Coverage Area: Up to 1500 sq. ft.
Power Source: 120V, 60Hz, 6.5A
Water Bucket Capacity: 1.8 gallons
Noise Level: 51 dB on normal setting
Dimensions: 15.4" W × 11.4" D × 24.3" H
Weight: 43.2 lbs
Refrigerant: R-410A
Energy Star Certified: Yes

Controls and Settings

Access all functions via electronic control panel.

Control Panel: POWER, HUMIDITY SET, MODE, TIMER, FILTER RESET, TURBO.

Humidity Setting: Adjust between 35%-85% in 5% increments. Modes: Normal (automatic), Continuous (runs constantly), Turbo (maximum dehumidification). Timer: Set 1-24 hours for automatic on/off. Filter Reset: Reset indicator after cleaning filter. Display: Shows current humidity, set point, mode, timer status, and alerts.

Connecting Drainage

Two drainage options: bucket collection or continuous drain.

Bucket Method: Unit will automatically shut off when bucket is full (indicator light illuminates).
Continuous Drain: Remove bucket and attach standard garden hose to drain port (hose not included).
Ensure hose runs downward to floor drain or sink.
For gravity drainage, place unit higher than drain point.

Tip: Check hose for kinks and ensure proper slope for drainage.

Operation Modes

Three operating modes for different conditions.

Normal Mode: Unit runs until set humidity is reached, then cycles on/off automatically.
Continuous Mode: Runs constantly regardless of humidity level.
Turbo Mode: Maximum fan speed for fastest moisture removal.
Auto-Defrost: Automatically activates when coil temperature drops below 41°F.
Auto-Restart: After power outage, resumes previous settings automatically.

WARNING! Do not operate below 41°F. Frost may form on coils in low temperatures.

Maintenance

Regular maintenance ensures optimal performance.

Clean filter every 2 weeks: Remove, wash with warm water, dry completely.
Empty water bucket regularly: Clean with mild detergent monthly.
Clean exterior: Wipe with damp cloth, then dry.
Check drain hose: Ensure no blockages in continuous drain setup.
Off-season storage: Empty all water, clean thoroughly, store upright in dry location.

Care & Cleaning

Unplug before cleaning. Use only mild detergent and water.

CAUTION! Do not use harsh chemicals, abrasives, or pressure washers. Never immerse unit in water.

Regulatory Information

UL Listed. FCC Part 15 Compliant. Energy Star Partner. This product contains refrigerants that must be recovered by certified technicians. For support, visit www.frigidaire.com or contact 1-800-374-4432.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	Power issue/bucket full	Check power outlet; ensure bucket is properly installed and empty.
Low moisture removal	Dirty filter/extreme temps	Clean filter; ensure room temperature is between 41°F-95°F.
Water leakage	Improper bucket placement	Remove and reinsert bucket; check for cracks; ensure continuous drain hose is connected properly.
Loud noise	Uneven surface/foreign object	Place on level surface; check for objects near fan.
Frost on coils	Low temperature	Move to warmer area; auto-defrost should activate within 30 minutes.
Filter light on	Dirty filter	Clean filter and press FILTER RESET button.

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-374-4432; www.frigidaire.com