Frigidaire FHDP6033W1 Dehumidifier Manual

The Frigidaire FHDP6033W1 is a 60-pint dehumidifier designed for residential use, featuring electronic controls, a continuous drain option, auto-restart, washable filter, and adjustable humidity settings. It operates on 115V AC, 60Hz, and is ideal for medium to large rooms. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drainage 7. Operation Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, built-in humidistat, removable water bucket with full-bucket alert, continuous drain port, washable air filter, caster wheels for mobility, and auto-defrost function.

Feature	Description
Electronic Controls	Digital display for humidity level, timer, and mode selection
60-Pint Capacity	Removes up to 60 pints of moisture per day at 80°F/60% RH
Continuous Drain Option	Garden hose connection for automatic water removal
Auto-Restart	Resumes previous settings after power interruption
Washable Filter	Removable filter for easy cleaning
Adjustable Humidistat	Set desired humidity level from 35% to 85%
Full-Bucket Alert	Indicator light and auto-shutoff when bucket is full
24-Hour Timer	Program on/off cycles
Auto-Defrost	Prevents coil freezing in low temperatures
Caster Wheels	Easy mobility between rooms

Installation

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place unit at least 12 inches from walls and furniture for proper airflow.
Check filter: Ensure washable filter is properly installed.
Bucket installation: Insert empty water bucket securely until it clicks.
Power connection: Plug into a dedicated 115V AC outlet.
Drainage setup: For continuous drain, attach garden hose to drain port.

WARNING! Do not operate in temperatures below 41°F (5°C). Ensure unit is upright for at least 24 hours before first use if tilted during transport.

First-Time Setup

Power on dehumidifier; follow control panel prompts.

Set humidity level: Press HUMIDITY button to select desired level (recommended 45-50%).
Select mode: Choose between CONTINUOUS or AUTO mode.
Set timer (optional): Use TIMER button to program on/off cycles.
Check drainage: Ensure bucket is empty or hose is connected for continuous drain.

CAUTION! Do not block air intake or exhaust grilles. Keep children and pets away from unit.

Specifications

Model: FHDP6033W1
Capacity: 60 pints per day (at 80°F/60% RH)
Power Supply: 115V AC, 60Hz, 6.5A
Operating Conditions: 41°F to 95°F (5°C to 35°C)
Water Bucket Capacity: 16 pints (removable)
Noise Level: ≤ 55 dB
Dimensions: 15.4" W x 11.4" D x 24.3" H
Weight: 41.9 lbs
Refrigerant: R410A
Certifications: ETL Listed, ENERGY STAR® Certified

Controls and Settings

Access all functions via electronic control panel on top of unit.

Control Panel: POWER, MODE (Continuous/Auto), HUMIDITY (35%-85%), FAN SPEED (High/Low), TIMER (1-24 hours), FILTER RESET indicator.

Humidity Control: Set target humidity; unit runs until level is reached. Mode Selection: CONTINUOUS runs constantly; AUTO cycles based on humidistat. Fan Speed: HIGH for maximum moisture removal; LOW for quiet operation. Timer: Set unit to turn on/off automatically. Filter Alert: FILTER light illuminates when cleaning is needed.

Connecting Drainage

Two drainage options: removable bucket or continuous drain hose.

Bucket method: Unit auto-shuts off when full; remove, empty, and reinsert bucket.
Continuous drain: Attach standard garden hose (not included) to drain port; route hose to floor drain or sink.

Tip: For continuous drain, ensure hose is downward sloping without kinks to prevent water backup.

Operation Modes

Supports multiple operating modes for efficient dehumidification.

Auto Mode: Unit cycles on/off to maintain set humidity level.
Continuous Mode: Runs constantly regardless of humidity level.
Timer Mode: Program to run for 1-24 hours then shut off (or start after delay).
Fan Only Mode: Circulates air without dehumidifying (via fan speed setting).

WARNING! Do not operate in enclosed spaces without proper ventilation. Allow unit to warm up if moved from cold to warm environment.

Maintenance

Regular maintenance ensures optimal performance and longevity.

Clean filter every 2 weeks: Remove, wash with warm water, dry completely, reinstall.
Empty bucket regularly: Prevent overflow and mold growth.
Clean exterior: Wipe with damp cloth; never use harsh chemicals.
Check coils annually: Vacuum dust from evaporator and condenser coils.
Store properly: If not using for extended period, empty bucket, clean filter, and cover unit.

Care & Cleaning

Unplug before cleaning. Use mild detergent and damp cloth only; do not immerse in water.

CAUTION! Never use gasoline, solvents, or abrasive cleaners. Do not spray water directly on unit.

Regulatory Information

ETL Listed to UL standard 474; complies with U.S. safety standards. ENERGY STAR® Certified for energy efficiency. Copyright © Frigidaire. For support, visit www.frigidaire.com or contact 1-800-374-4432. This product contains refrigerant that must be disposed of by certified technicians.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	Power issue/full bucket	Check power outlet; ensure bucket is empty and properly inserted.
Reduced moisture removal	Dirty filter/extreme conditions	Clean filter; ensure room temperature is within 41°F-95°F range.
Water leakage	Improper hose connection/bucket misaligned	Check hose for kinks; ensure bucket is fully seated.
Unusual noise	Loose parts/foreign objects	Ensure unit is level; check for obstructions near fan.
FILTER light on	Dirty filter	Clean filter and press FILTER RESET button.
Frost on coils	Low temperature	Auto-defrost should activate; move to warmer area if persistent.

Reset: Unplug for 30 seconds, then restart. Press FILTER RESET after cleaning.

Service: 1-800-374-4432; www.frigidaire.com