Frigidaire FGAC5045W1 Dehumidifier Manual

The Frigidaire FGAC5045W1 is a 50-pint dehumidifier designed for medium to large rooms, featuring automatic humidity control, continuous drain option, washable air filter, digital humidistat, full tank alert with auto shut-off, turbo mode for faster moisture removal, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operating Modes 7. Maintenance 8. Storage 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, washable air filter, water collection bucket, continuous drain hose connection, casters for mobility, and adjustable humidistat.

Feature	Description
Capacity	50 pints per day (at 60°F, 60% RH)
Digital Humidistat	Precise humidity control from 35% to 85%
Auto Restart	Resumes previous settings after power interruption
Continuous Drain	Option for hose connection (hose not included)
Full Bucket Alert	Indicator light and auto shut-off when bucket is full
Washable Filter	Removable and reusable air filter
Turbo Mode	Increases fan speed for faster dehumidification
24-Hour Timer	Programmable on/off timer
Low Temperature Operation	Operates down to 41°F (5°C)
Energy Star Certified	Energy-efficient operation

Installation

Unpack and inspect contents. Place on level surface in area with proper air circulation.

Remove all packaging materials and tape.
Position unit: Place on level floor at least 12 inches from walls and furniture.
Install casters: Attach all four casters to bottom of unit (if not pre-installed).
Check filter: Ensure air filter is properly installed.
Allow upright position: Let unit stand upright for 24 hours before first use if transported on its side.

WARNING! Do not operate in temperatures below 41°F (5°C). Ensure proper ventilation around unit.

First-Time Setup

Plug into grounded electrical outlet; follow initial setup procedure.

Power on: Plug into 115V AC outlet; press POWER button.
Set humidity level: Use UP/DOWN buttons to set desired humidity (40-50% recommended).
Select mode: Choose between Normal, Turbo, or Continuous mode.
Check bucket: Ensure water collection bucket is properly seated.
Test operation: Allow unit to run for 15 minutes to ensure proper operation.

CAUTION! Use only grounded outlet. Do not use extension cord.

Specifications

Model: FGAC5045W1
Capacity: 50 pints per day (at 60°F, 60% RH)
Coverage Area: Up to 1500 sq. ft.
Power Requirements: 115V, 60Hz, 5.0A
Water Tank Capacity: 1.8 gallons
Operating Temperature: 41°F to 95°F (5°C to 35°C)
Noise Level: 51 dB on normal setting
Dimensions: 15.4" W × 11.0" D × 24.3" H
Weight: 41.9 lbs
Refrigerant: R-410A

Controls and Settings

Digital control panel located on top of unit.

Control Panel: POWER button, HUMIDITY SET buttons, MODE button, TIMER button, FILTER RESET button, TURBO button.

Humidity Control: Adjust between 35% and 85% RH. Modes: Normal (standard operation), Turbo (increased fan speed), Continuous (runs continuously regardless of humidity). Timer: Program on/off times in 1-hour increments up to 24 hours. Filter Alert: LED indicates when filter needs cleaning. Bucket Full: Red LED lights when water tank needs emptying.

Operating Modes

Three operating modes for different conditions.

Normal Mode: Standard operation with automatic humidity control.
Turbo Mode: Maximum moisture removal for high humidity conditions.
Continuous Mode: Runs continuously regardless of humidity setting.
Timer Operation: Set unit to turn on/off at specific times.

Tip: Use Turbo mode initially in very damp areas, then switch to Normal mode.

Maintenance

Regular maintenance ensures optimal performance and longevity.

Empty water bucket: When FULL light illuminates, remove and empty bucket.
Clean air filter: Remove and wash filter every 2 weeks or as needed.
Reset filter indicator: Press FILTER RESET after cleaning filter.
Clean exterior: Wipe with damp cloth; do not use harsh chemicals.
Check drain hose: If using continuous drain, ensure hose is clear.
Clean condenser coils: Vacuum coils annually for best efficiency.

WARNING! Unplug unit before performing any maintenance.

Storage

Proper storage when not in use for extended periods.

Clean unit thoroughly following maintenance instructions.
Empty and dry water bucket completely.
Run unit in Fan Only mode for 24 hours to dry internal components.
Store in upright position in dry, protected area.
Cover unit to prevent dust accumulation.

CAUTION! Do not store with water in bucket to prevent mold growth.

Safety Information

Important safety precautions for proper operation.

Always use grounded electrical outlet
Do not operate below 41°F (5°C)
Keep unit away from water sources
Do not block air intake or exhaust
Empty bucket regularly to prevent overflow
Do not use extension cords
Keep children away from unit
Service only by qualified technicians

Regulatory Information

UL Listed; meets safety standards for household use. Energy Star certified for energy efficiency. EPA refrigerant compliance. Copyright © Frigidaire. For support, visit www.frigidaire.com or contact 1-800-374-4432. Model FGAC5045W1 manufactured for residential use only.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not running	Power issue/bucket full	Check power connection; empty water bucket; reset circuit breaker.
Poor dehumidification	Filter dirty/doors open	Clean air filter; close room doors/windows; check room temperature.
Water leakage	Bucket not seated/hose issue	Ensure bucket properly seated; check drain hose connection.
Loud noise	Uneven surface/fan issue	Place on level surface; check for obstructions in fan.
Filter light on	Dirty filter	Clean air filter; press FILTER RESET button.
Frost on coils	Low temperature	Turn unit off; allow to thaw; increase room temperature above 41°F.

Reset: Unplug for 5 minutes, then restart if unit malfunctions.

Service: 1-800-374-4432; www.frigidaire.com