Frigidaire FFAP5033W1 Dehumidifier Manual

The Frigidaire FFAP5033W1 is a 50-pint capacity dehumidifier designed for medium to large rooms, featuring automatic humidity control, continuous drainage option, washable air filter, electronic controls with digital display, auto-restart function, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance 8. Care & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Electronic control panel, water collection bucket, washable air filter, continuous drain hose connection, casters for mobility, and humidity sensor.

Feature	Description
Capacity	50 pints per day (at 60°F, 60% RH)
Humidity Control	Automatic with adjustable set point (35%-85%)
Water Removal	Built-in bucket with full indicator and continuous drain option
Air Filter	Washable mesh filter for improved air quality
Controls	Electronic touchpad with digital display
Auto Restart	Resumes previous settings after power interruption
Mobility	Four swivel casters for easy movement
Timer	24-hour programmable on/off timer
Energy Efficiency	ENERGY STAR® certified
Dimensions	15.4" W x 11.4" D x 24.3" H

Installation

Unpack and inspect contents. Place on level surface in area with proper air circulation.

Remove packaging materials and tape from unit.
Place dehumidifier on level floor at least 12 inches from walls and furniture.
Install casters by inserting into base slots and pressing until they click into place.
For continuous drainage: Connect 5/8" ID hose to drain outlet at back of unit.
Plug power cord into grounded 115V AC outlet.

WARNING! Do not use extension cords. Ensure proper ventilation around unit.

First-Time Setup

Power on dehumidifier; configure initial settings.

Insert water bucket securely until it clicks into place.
Plug into power outlet; unit will beep and display will light up.
Set desired humidity level using UP/DOWN buttons (recommended: 45-50%).
Select fan speed (HIGH for faster dehumidification, LOW for quieter operation).
For continuous drainage: Ensure hose is properly connected and directed to drain.

CAUTION! Allow unit to sit upright for 24 hours if transported on its side.

Specifications

Model: FFAP5033W1
Capacity: 50 pints per day (at 60°F, 60% RH)
Coverage Area: Up to 1500 sq. ft.
Power Requirements: 115V, 60Hz, 6.5A
Refrigerant: R-410A
Water Bucket Capacity: 1.6 gallons
Noise Level: 51 dB on LOW setting
Certifications: ENERGY STAR®, UL Listed
Warranty: 1-year full warranty, 5-year sealed system warranty
Weight: 41.9 lbs

Controls and Settings

Control Panel: POWER, HUMIDITY SET, FAN SPEED, TIMER, FILTER RESET, CONTINUOUS.

Display Indicators: Current humidity, set point, bucket full, filter clean, timer, continuous mode.

Humidity Control: Adjust between 35%-85% in 5% increments. Fan Speed: HIGH for maximum moisture removal, LOW for quiet operation. Timer: Program 24-hour on/off schedule. Continuous Mode: Runs continuously regardless of humidity level. Filter Reset: Resets filter cleaning reminder after maintenance.

Operation Modes

Normal Mode: Unit runs until set humidity is reached, then cycles on/off. Continuous Mode: Runs constantly for maximum moisture removal.

Press POWER to turn unit on.
Set desired humidity using UP/DOWN buttons.
Select fan speed (HIGH/LOW).
For continuous operation: Press CONTINUOUS button.
To program timer: Press TIMER, set hours using UP/DOWN, press TIMER again to confirm.

Tip: Close windows and doors for most efficient operation.

Maintenance

Regular maintenance ensures optimal performance and longevity.

Empty water bucket: When FULL indicator lights, remove and empty bucket.
Clean air filter: Remove monthly, wash with warm water and mild detergent, dry completely.
Reset filter indicator: After cleaning, press and hold FILTER RESET for 3 seconds.
Clean exterior: Wipe with damp cloth, then dry.
End-of-season storage: Empty bucket, clean filter, coil, and housing. Store upright in dry location.

WARNING! Always unplug unit before performing any maintenance.

Care & Cleaning

Unplug before cleaning. Clean grille and housing with soft cloth dampened with water.

CAUTION! Do not use abrasive cleaners, gasoline, or solvents. Do not immerse unit in water.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Frigidaire; trademarks of Electrolux Home Products, Inc. ENERGY STAR® qualified. For support, visit www.frigidaire.com or contact 1-800-374-4432.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not running	Power issue/bucket full	Check power connection; empty water bucket; ensure bucket is properly seated.
Poor dehumidification	Room conditions/filter	Ensure room temp above 65°F; clean air filter; check for air blockage.
Water leakage	Bucket/drain hose	Ensure bucket is properly inserted; check drain hose connection for leaks.
Loud noise	Unit not level/obstruction	Place on level surface; check for objects touching fan or coils.
Display not working	Power/control issue	Unplug for 1 minute, then replug; if issue persists, contact service.

Reset: Unplug for 10 minutes to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com