Frigidaire FFAD6023W1 Dehumidifier Manual

The Frigidaire FFAD6023W1 is a 60-pint capacity dehumidifier designed for medium to large rooms, featuring electronic controls, a continuous drain option, a built-in humidistat, auto restart, a washable filter, and a front-loading bucket with a full-bucket alert. It operates on 115V/60Hz power and is ideal for basements, living areas, and other spaces requiring moisture control. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic control panel, Water bucket, Continuous drain port, Air filter, Humidistat, Handle, Casters.

Installation & Placement

Unpack and inspect contents. Place on a level, stable surface.

1. Clearance: Ensure at least 12 inches of space around all sides for proper airflow.
2. Level Surface: Place on a firm, flat floor to prevent vibration and noise.
3. Power Outlet: Plug into a grounded 115V, 60Hz outlet. Do not use an extension cord.
4. Environment: Operate in temperatures between 41°F (5°C) and 90°F (32°C).

WARNING! Do not place near heat sources or in direct sunlight. Ensure the unit is upright before operating.

First-Time Setup

Plug in the unit; the control panel will illuminate.

1. Bucket Installation: Slide the empty bucket into the front compartment until it clicks.
2. Humidity Setting: Press the HUMIDITY button to set desired level (35% - 85%).
3. Fan Speed: Select LOW or HIGH fan speed using the FAN button.
4. Timer (Optional): Use TIMER button to program automatic start/stop times.
5. Continuous Drain: Attach a standard garden hose to the drain port if desired.

CAUTION! Handle the bucket with care to avoid spills. Ensure the filter is clean before first use.

Specifications

• Model: FFAD6023W1
• Capacity: 60 pints per day (at 80°F, 60% RH)
• Power Supply: 115V, 60Hz
• Amperage: 5.5 Amps
• Operating Temperature: 41°F to 90°F (5°C to 32°C)
• Humidity Control: Built-in humidistat (35% - 85% RH)
• Water Bucket Capacity: 16 pints
• Air Flow: High/Low fan speeds
• Filter: Washable mesh air filter
• Dimensions (approx.): 15.4" W x 11.4" D x 24.3" H
• Weight: 41 lbs

Controls and Settings

Control Panel: POWER, HUMIDITY, FAN, TIMER, FILTER RESET.

Display Indicators: Power On, Bucket Full, Filter Clean, Humidity Level, Timer Set, Fan Speed.

Humidity Setting: Press HUMIDITY to cycle through 35%, 40%, 45%, 50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, or CONTINUOUS run. Fan Speed: Press FAN to toggle between HIGH (faster dehumidification) and LOW (quieter operation). Timer: Press TIMER to set delay off (1-24 hours) or delay on. Filter Reset: Press and hold FILTER RESET for 3 seconds after cleaning the filter to reset the alert.

Operation Modes

Normal Mode: Set desired humidity; unit cycles on/off automatically. Continuous Mode: Runs continuously regardless of humidity; select "CONTINUOUS" on humidity setting. Laundry Mode: Ideal for drying laundry in a closed room; runs at high fan speed. Timer Mode: Program unit to turn on or off after a set delay (1-24 hours).

1. Press POWER to turn on.
2. Set humidity level with HUMIDITY button.
3. Select fan speed with FAN button.
4. Unit will run until desired humidity is reached, then enter standby.

Tip: For fastest dehumidification, set to CONTINUOUS mode and HIGH fan speed.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Empty Bucket: When FULL light illuminates, remove bucket, pour water, and reinsert.
2. Clean Filter: Every 2-4 weeks, remove filter, rinse with warm water, air dry completely, and reinstall.
3. Clean Exterior: Wipe cabinet with a soft, damp cloth. Do not use harsh chemicals.
4. Clean Bucket: Periodically wash bucket with mild detergent to prevent mold/mildew.
5. End-of-Season: Follow storage instructions in Section 10.

WARNING! Always unplug the unit before cleaning. Do not immerse in water.

Drainage Options

Bucket Drainage: Manual emptying when full (recommended for low humidity areas). Continuous Drainage: For unattended operation.

1. Locate the drain port on the back of the unit.
2. Remove the drain port cap.
3. Connect a standard garden hose (not included). Ensure hose runs downhill without kinks.
4. Place the other end of the hose into a floor drain or suitable outlet.
5. The bucket can remain in place; water will bypass it and drain continuously.

CAUTION! Ensure hose connection is secure to prevent leaks. Check hose periodically for clogs.

Care & Storage

When not in use for extended periods:

1. Unplug the unit.
2. Empty and clean the water bucket. Allow to dry.
3. Clean the air filter and let it dry completely.
4. Run the unit in FAN ONLY mode for a few hours to dry internal components.
5. Coil the power cord and secure with a twist tie.
6. Store upright in a cool, dry place. Cover to prevent dust accumulation.

CAUTION! Do not store with water in the bucket. Avoid extreme temperatures.

Regulatory Information

This appliance complies with FCC Part 15 Subpart B for Class B digital devices. It meets applicable safety standards. Copyright © Frigidaire. Frigidaire is a registered trademark of AB Electrolux. For support, visit www.frigidaire.com or contact customer service at 1-800-374-4432.

Troubleshooting

Reset: Unplug unit for 5 minutes to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com