Frigidaire FFAD6022W1 Dehumidifier Manual

The Frigidaire FFAD6022W1 is a 60-pint capacity dehumidifier designed for medium to large rooms up to 1500 sq. ft. It features an adjustable humidistat, continuous drainage option, automatic restart, washable filter, full bucket alert, and 24-hour timer. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Control panel with digital display, Water collection bucket, Washable air filter, Continuous drainage port, Carrying handles, Power cord.

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

1. Choose location: Place in center of room for best air circulation, away from walls and furniture.
2. Clearance: Ensure at least 12 inches of clearance on all sides.
3. Check floor: Place on waterproof surface or use drip tray if needed.
4. Power connection: Plug into dedicated 120V AC outlet; avoid extension cords.

WARNING! Do not place in areas below 41°F (5°C) to prevent coil freezing. Ensure proper drainage path.

First-Time Setup

Power on dehumidifier; follow initial setup steps.

1. Install filter: Remove and rinse washable filter, let dry completely before inserting.
2. Set humidistat: Press HUMIDITY button to set desired level (recommended 45-50%).
3. Select mode: Choose between CONTINUOUS or AUTO mode based on needs.
4. Set timer: Use TIMER button to program daily operation if desired.
5. Check drainage: Install hose for continuous drainage or place bucket for manual.

CAUTION! Handle bucket carefully to avoid spills. Ensure unit is upright before operation.

Specifications

• Model: FFAD6022W1
• Capacity: 60 pints per day (at AHAM conditions: 60°F, 90% RH)
• Coverage: Up to 1500 sq. ft. in moderate humidity conditions
• Power: 120V, 60Hz, 6.5A
• Water Removal: Adjustable humidistat (35% - 85% RH)
• Bucket Capacity: 16 pints with full bucket alert and auto shut-off
• Air Flow: 206 CFM (cubic feet per minute)
• Noise Level: 51 dB on low setting
• Dimensions: 15.4" W × 11.4" D × 24.3" H
• Weight: 41.9 lbs
• Refrigerant: R-410A

Controls and Settings

Control Panel: POWER, MODE, HUMIDITY, FAN SPEED, TIMER, FILTER RESET.

Display Indicators: Current humidity, Set humidity, Timer, Full bucket, Filter alert, Mode icons.

Humidity Control: Adjust between 35% and 85% RH in 5% increments. Mode Selection: CONTINUOUS (runs constantly), AUTO (cycles based on humidistat). Fan Speed: HIGH for maximum dehumidification, LOW for quiet operation. Timer: Set 1-24 hours for automatic start/stop. Filter Reset: Press after cleaning filter to reset maintenance reminder.

Operation Modes

Auto Mode: Unit runs until set humidity is reached, then cycles on/off to maintain level. Continuous Mode: Runs constantly regardless of humidity level. Timer Operation: Program to turn on/off at specific times.

1. Press POWER to turn unit on.
2. Select MODE to choose AUTO or CONTINUOUS.
3. Adjust HUMIDITY to desired level using up/down arrows.
4. Select FAN SPEED (HIGH or LOW).
5. Set TIMER if needed (1-24 hours).

Tip: Use AUTO mode for energy efficiency. Use CONTINUOUS mode for rapid moisture removal.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Clean filter: Remove and rinse every 2 weeks or as needed. Let dry completely before reinstalling.
2. Empty bucket: When full bucket light illuminates, turn unit off, remove and empty bucket.
3. Clean exterior: Wipe with damp cloth; do not use harsh chemicals.
4. Clean bucket: Monthly, wash with mild detergent and rinse thoroughly.
5. Check coils: Annually, vacuum condenser coils to remove dust.
6. Off-season storage: Follow proper storage procedures when not in use.

WARNING! Always unplug unit before cleaning. Never operate without filter installed.

Drainage Options

Manual Drainage: Use included 16-pint bucket. Continuous Drainage: Connect 5/8" ID garden hose (not included) to drainage port.

For Continuous Drainage:

1. Turn unit off and unplug.
2. Remove bucket and locate drainage port on back.
3. Connect standard 5/8" ID garden hose to port.
4. Route hose to floor drain, sink, or sump pump.
5. Ensure hose has downward slope without kinks.
6. Replace bucket in unit (required for operation even with hose).

CAUTION! Ensure proper drainage path to prevent water damage. Check hose regularly for clogs.

Care & Storage

For seasonal storage or extended non-use:

1. Unplug unit and allow to sit upright for 24 hours.
2. Empty and clean bucket thoroughly.
3. Clean filter and let dry completely.
4. Coil power cord neatly and secure with twist tie.
5. Store in cool, dry place protected from dust.
6. Cover unit to prevent dust accumulation.

CAUTION! Store upright. Do not place heavy items on top. Keep away from extreme temperatures.

Regulatory Information

UL Listed: Meets UL 474 safety standards. Energy Star: Certified for energy efficiency. EPA Refrigerant: Uses R-410A, an environmentally friendly refrigerant. FCC Part 15: Class B digital device; complies with interference limits. Copyright © Frigidaire; trademarks of Electrolux Home Products, Inc. For support, visit www.frigidaire.com or contact 1-800-374-4432.

Troubleshooting

Reset: Unplug for 5 minutes, then restart. For persistent issues, contact service.

Service: 1-800-374-4432; www.frigidaire.com