Frigidaire FDR30S1ENG13 Dehumidifier Manual

The Frigidaire FDR30S1ENG13 is a 30-pint capacity dehumidifier designed for residential use. It features electronic controls, an adjustable humidistat, continuous drain option, auto-restart, washable air filter, and a full tank alert with auto shut-off. Ideal for medium-sized rooms up to 1500 sq ft. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic control panel, Water collection bucket, Washable air filter, Continuous drain hose outlet, Humidistat, Full bucket indicator light.

Installation & Placement

Unpack and inspect contents. Place on a level, stable surface.

1. Choose location: Place in center of room, at least 12 inches from walls and furniture for proper airflow.
2. Check clearance: Ensure at least 20 inches of overhead clearance.
3. Level unit: Adjust leveling feet if necessary to prevent vibration.
4. Install drain hose (optional): Attach standard garden hose to continuous drain outlet for permanent drainage.
5. Plug into dedicated 115V AC power outlet.

WARNING! Do not place in areas below 41°F (5°C) to prevent coil freezing. Ensure power outlet is properly grounded.

First-Time Setup

Power on dehumidifier; follow initial setup procedure.

1. Insert water bucket: Ensure bucket is properly seated and clicks into place.
2. Set humidistat: Press HUMIDITY button and use arrows to set desired humidity level (45-50% recommended).
3. Select fan speed: Press FAN button to choose High or Low speed.
4. Set timer (optional): Press TIMER to program automatic on/off schedule.
5. Allow 24 hours: Unit may take up to 24 hours to reach optimal performance in new environment.

CAUTION! Handle water bucket carefully when full (approx. 2 gallons). Empty before moving unit.

Specifications

• Model: FDR30S1ENG13
• Capacity: 30 pints per day (AHAM verified at 80°F/60% RH)
• Coverage Area: Up to 1500 square feet
• Power Requirements: 115V, 60Hz, 3.5 Amps
• Water Bucket Capacity: 2 gallons (7.6 liters)
• Operating Temperature: 41°F to 95°F (5°C to 35°C)
• Noise Level: 51 dB on Low speed
• Dimensions: 15.4" W x 11.4" D x 19.7" H
• Weight: 33.5 lbs
• Refrigerant: R410A

Controls and Settings

Control Panel: POWER, HUMIDITY (+/-), FAN (High/Low), TIMER, FILTER RESET indicator.

Display Indicators: Current humidity %, Set humidity %, Fan speed, Timer status, Full bucket alert, Filter clean reminder.

Humidity Control: Adjust between 35% and 85% RH. Fan Control: High for maximum moisture removal, Low for quiet operation. Timer: Program up to 24 hours in advance. Auto Defrost: Automatically activates when coil temperature drops below 41°F. Filter Alert: Flashing indicator when filter needs cleaning (approximately every 250 hours).

Operation Modes

Normal Mode: Unit runs until set humidity is reached, then cycles on/off. Continuous Mode: Press and hold HUMIDITY for 3 seconds to run continuously regardless of humidity level. Laundry Mode: High fan speed with continuous operation for drying laundry rooms.

1. Press POWER to turn unit on.
2. Set desired humidity using HUMIDITY buttons.
3. Select fan speed with FAN button.
4. Monitor current humidity on digital display.
5. When bucket is full, unit will shut off and indicator will light.

Tip: For maximum efficiency, keep doors and windows closed while dehumidifier is operating.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Clean air filter: Remove and wash with warm, soapy water every 2-4 weeks. Dry completely before reinstalling.
2. Empty water bucket: Empty regularly to prevent overflow and mineral buildup.
3. Clean exterior: Wipe with soft, damp cloth. Do not use harsh chemicals.
4. Clean bucket: Monthly cleaning with vinegar solution to prevent mold/mildew.
5. Reset filter indicator: Press and hold FILTER button for 3 seconds after cleaning filter.

WARNING! Always unplug unit before performing any maintenance. Never operate without air filter installed.

Draining Options

Bucket Drainage: Standard method using 2-gallon removable bucket. Continuous Drainage: Connect 5/8" ID garden hose to drain outlet (hose not included).

1. For continuous drain: Place unit near floor drain or sink.
2. Remove drain plug from back of unit.
3. Attach standard garden hose (ensure secure connection).
4. Route hose to drain with downward slope.
5. Bucket will not fill when continuous drain is properly connected.

Note: When using continuous drain, full bucket alert will not activate. Ensure hose is not kinked or blocked.

Care & Storage

For seasonal storage or extended non-use:

1. Unplug unit from power outlet.
2. Empty and clean water bucket thoroughly.
3. Clean air filter and let dry completely.
4. Run unit in Fan Only mode for 24 hours to dry internal components.
5. Coil power cord and store in dry location above 41°F.
6. Cover unit to prevent dust accumulation.

CAUTION! Never store unit with water in bucket. Store upright in temperature-controlled environment.

Regulatory Information

UL Listed: Meets UL 474 safety standards. Energy Star: Certified for energy efficiency. EPA: Compliant with refrigerant regulations. Copyright © Frigidaire. For support, visit www.frigidaire.com or contact 1-800-374-4432. This product contains R410A refrigerant which has zero ozone depletion potential.

Troubleshooting

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com