Frigidaire FDR30S1ENG12 Dehumidifier Manual

The Frigidaire FDR30S1ENG12 is a 30-pint dehumidifier designed for medium-sized rooms up to 1500 sq. ft. It features electronic controls, a continuous drain option, automatic restart, a washable filter, and a full tank alert with auto-shutoff. This manual covers safety instructions, setup, operation, maintenance, and troubleshooting for optimal performance.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Operation 6. Drainage Options 7. Maintenance & Cleaning 8. Energy Saving Tips 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Electronic control panel, removable water bucket, washable air filter, continuous drain hose connection, and carrying handles.

Feature	Description
Capacity	30 pints per day (at 80°F, 60% RH)
Coverage Area	Up to 1500 square feet
Electronic Controls	Digital display with humidity readout and timer
Auto Restart	Resumes previous settings after a power interruption
Full Bucket Alert	Indicator light and auto-shutoff when bucket is full
Continuous Drain	Option for hose connection (hose not included)
Washable Filter	Removable filter for easy cleaning
Carrying Handles	Integrated handles for easy portability
Low Temperature Operation	Designed to operate down to 41°F (5°C)
Energy Star Certified	Meets energy efficiency guidelines

Installation & Placement

Unpack and inspect contents. Choose a suitable location for operation.

Place on a level, stable surface away from walls and furniture for proper airflow.
Ensure the unit is at least 12 inches from walls, curtains, or other obstructions.
Place in the center of the room or area with the highest humidity for best results.
Keep away from heat sources and direct sunlight.
Ensure the power cord can reach a grounded outlet without stretching.

WARNING! Do not place in tight spaces or block air intake/exhaust grilles. Ensure the unit is upright before operating.

First-Time Setup

Prepare the dehumidifier for initial use.

Remove all packaging materials and tape from the unit and bucket.
Install the washable air filter by sliding it into the front grille.
Insert the empty water bucket securely until it clicks into place.
Plug the power cord into a dedicated 115V AC, 60Hz grounded outlet.
Press the POWER button to turn on the unit.
Set desired humidity level using the UP/DOWN buttons (recommended 45-50%).
Select fan speed (HIGH or LOW) based on your needs.

CAUTION! Do not operate without the filter installed. Allow the unit to stand upright for 24 hours if it was tilted during transport.

Specifications

Model: FDR30S1ENG12
Dehumidification Capacity: 30 pints per day (at 80°F/60% RH)
Coverage Area: Up to 1500 sq. ft.
Power Supply: 115V AC, 60Hz
Amperage: 3.5 Amps
Water Bucket Capacity: 1.8 gallons (6.8 liters)
Operating Temperature Range: 41°F to 95°F (5°C to 35°C)
Noise Level: ≤ 51 dB on low speed
Refrigerant: R410A
Product Dimensions (HxWxD): 19.5" x 13.4" x 9.8"
Weight: 33 lbs
Certifications: Energy Star, ETL Listed

Controls and Operation

Control Panel: POWER, FAN SPEED (HIGH/LOW), HUMIDITY SET (UP/DOWN), TIMER, FILTER ALERT light, FULL BUCKET light.

Operation: Press POWER to turn on. Use UP/DOWN to set target humidity (35%-85% range). Select fan speed: HIGH for faster dehumidification, LOW for quieter operation. TIMER can be set for automatic on/off (1-24 hours).

Display: Shows current room humidity and target setting. FILTER ALERT light illuminates when filter needs cleaning. FULL BUCKET light turns on and unit shuts off when bucket is full.

Drainage Options

Two methods for water removal: manual bucket emptying or continuous drainage.

Manual Bucket: Unit will shut off when bucket is full. Remove bucket by pulling straight out. Empty water and replace securely.
Continuous Drain: Remove bucket. Attach a standard garden hose (¾" inner diameter, not included) to the drain port at the back. Route hose to floor drain or suitable outlet. Ensure hose has downward slope without kinks.

Tip: For continuous operation, use the drain hose option. Check hose connection periodically for leaks.

Maintenance & Cleaning

Regular maintenance ensures efficiency and longevity.

Air Filter: Clean every 2 weeks or when FILTER light comes on. Remove filter, rinse with warm water, let dry completely before reinstalling.
Water Bucket: Empty and clean monthly with mild detergent. Rinse thoroughly.
Exterior: Wipe with a soft, damp cloth. Do not use abrasive cleaners.
Grilles and Coils: Use a vacuum with brush attachment to remove dust from intake and exhaust grilles annually.
End-of-Season Storage: Empty and clean bucket. Run unit in FAN mode for 24 hours to dry internal components. Coil power cord and store in a dry place.

CAUTION! Always unplug unit before cleaning. Never immerse in water or use harsh chemicals.

Energy Saving Tips

Maximize efficiency and reduce energy consumption.

Set humidity to 45-50% for optimal comfort and efficiency.
Use the timer to run only when needed (e.g., overnight or when away).
Keep doors and windows closed in the room being dehumidified.
Ensure the air filter is clean to maintain proper airflow.
Use LOW fan speed for continuous operation in moderately humid conditions.
Place unit in the coolest part of the room for better performance.

Regulatory Information

This appliance complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. This dehumidifier uses refrigerant R410A. At end of life, dispose of according to local regulations—do not incinerate. For service or support, contact Frigidaire at 1-800-374-4432 or visit www.frigidaire.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not start	No power, full bucket, timer set	Check plug/power; empty bucket; check timer settings.
Little or no water collection	Low humidity, cold room, dirty filter	Check room humidity/temp; clean filter; ensure vents not blocked.
Unit runs but air feels warm	Normal operation in low humidity	This is normal when moisture load is light.
Loud or unusual noise	Uneven surface, loose parts	Place on level surface; check for loose grilles or panels.
Error code on display	Sensor issue, system fault	Unplug for 5 minutes, then restart. If persists, call for service.
Water leakage	Bucket not seated, hose leak	Ensure bucket is fully inserted; check hose connection.
FILTER light on	Dirty air filter	Remove, clean, and dry filter completely before reinstalling.

Reset: Unplug unit for 5 minutes to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com