Frigidaire FDR30S1 Dehumidifier Manual

The Frigidaire FDR30S1 is a 30-pint dehumidifier designed for medium-sized rooms up to 1500 sq. ft. It features electronic controls with a digital display, 24-hour timer, continuous drain option, auto-restart, washable filter, and adjustable humidity settings from 35% to 85%. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Storage Instructions 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Electronic control panel, Digital humidity display, Full bucket alert with auto shut-off, Continuous drain port, Washable air filter, 24-hour programmable timer, and Carrying handles.

Feature	Description
Humidity Control	Adjustable from 35% to 85% RH
Water Removal	30 pints per day at 80°F, 60% RH
Bucket Capacity	1.8 gallons with full indicator
Continuous Drain	Garden hose adapter included
Filter	Washable mesh filter
Timer	24-hour on/off programmable timer
Auto Restart	Resumes previous settings after power outage
Controls	Electronic touchpad with LED display
Power Cord	6-foot length
Warranty	1-year limited warranty

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

Clearance: Allow at least 12 inches of space on all sides for proper airflow.
Positioning: Place in center of room away from walls and furniture.
Temperature range: Operate between 41°F and 95°F for optimal performance.
Drainage: Place near floor drain or use included hose for continuous drainage.

WARNING! Do not place near heat sources or in direct sunlight. Ensure unit is upright for 24 hours before first use if transported on its side.

First-Time Setup

Plug into grounded 115V outlet; follow initial setup procedure.

Initial dry-out: Run unit for first 24 hours to remove shipping moisture.
Set humidity level: Press HUMIDITY button to select desired setting (45-50% recommended).
Timer programming: Use TIMER button to set automatic on/off times.
Drain setup: Attach hose to continuous drain port if using permanent drainage.

CAUTION! Always use grounded outlet. Do not use extension cord.

Specifications

Model: FDR30S1
Capacity: 30 pints per day (AHAM)
Coverage: Up to 1500 square feet
Power: 115V, 60Hz, 3.5 Amps
Bucket Capacity: 1.8 gallons
Noise Level: 51 dB on low setting
Dimensions: 15.4" W x 11.4" D x 19.7" H
Weight: 33.5 lbs
Refrigerant: R-410A
Operating Temp: 41°F to 95°F

Controls and Settings

Control Panel: POWER, HUMIDITY SET, FAN SPEED (High/Low), TIMER, FILTER RESET, CONTINUOUS.

Display Indicators: Current humidity, Set humidity, Timer settings, Filter alert, Bucket full, Continuous mode.

Humidity Control: Adjust in 5% increments from 35% to 85%. Fan Speed: High for maximum moisture removal, Low for quiet operation. Timer: Program on/off times in 1-hour increments. Continuous Mode: Runs continuously regardless of humidity setting. Filter Alert: Lights when filter needs cleaning.

Operation Modes

Normal Mode: Unit runs until set humidity is reached, then cycles on/off. Continuous Mode: Runs constantly for maximum moisture removal.

Power on: Press POWER button.
Set humidity: Press HUMIDITY button until desired percentage displays.
Select fan speed: Press FAN button for High or Low setting.
Timer setup: Press TIMER to program automatic operation.
Continuous drain: Attach hose and press CONTINUOUS button.

Tip: For energy savings, set humidity to 50-55%. Use continuous mode only when necessary.

Maintenance & Cleaning

Unplug unit before any maintenance. Clean every 2-4 weeks during heavy use.

Empty bucket: Remove and empty water bucket when full indicator lights.
Clean filter: Remove washable filter every 250 hours; rinse with warm water.
Exterior cleaning: Wipe cabinet with damp cloth; never use harsh chemicals.
Coil cleaning: Vacuum condenser coils every season to maintain efficiency.
Bucket cleaning: Wash bucket with mild detergent monthly to prevent mold.

WARNING! Never operate without filter. Do not immerse unit in water.

Storage Instructions

Prepare unit for seasonal storage when not in use for extended periods.

Clean thoroughly: Follow all cleaning steps in maintenance section.
Dry completely: Run fan-only mode for 24 hours to dry internal components.
Drain all water: Empty bucket and drain hose completely.
Store properly: Cover unit and store upright in dry location.

CAUTION! Store in temperature-controlled area. Do not store with water in bucket.

Regulatory Information

UL Listed: Meets UL 474 safety standards. Energy Star: Certified for energy efficiency. EPA Refrigerant: Uses R-410A, EPA compliant. Copyright © Frigidaire; trademarks of Electrolux Home Products, Inc. For support, visit www.frigidaire.com or contact 1-800-374-4432.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not running	Power/Bucket full	Check power connection; empty water bucket; reset filter light.
Poor dehumidification	Temperature/Filter	Ensure room temp above 65°F; clean filter; check for air blockage.
Water leakage	Bucket/Drain hose	Ensure bucket properly seated; check drain hose connection.
Loud operation	Placement/Leveling	Place on level surface; ensure nothing touching unit.
Display not working	Power/Control lock	Check outlet; press and hold POWER for 5 seconds to reset.
Ice on coils	Low temperature	Turn off and let ice melt; move to warmer area.

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com