Frigidaire FDR30S1 - 30 Pint Capacity Dehumidifier Dehumidifier manual

The Frigidaire FDR30S1 is a 30-pint capacity dehumidifier designed for medium to large rooms, featuring an Energy Star certification, electronic controls with humidity settings, continuous drain option, auto-restart function, washable filter, and low-temperature operation capability. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic control panel, 30-pint water bucket, washable air filter, continuous drain hose connection, casters for mobility, and auto-defrost function.

Installation

Unpack and inspect contents. Place on level, stable floor.

1. Positioning: Place unit on level surface at least 12 inches from walls and furniture for proper airflow.
2. Check filter: Ensure washable filter is properly installed.
3. Bucket installation: Insert water bucket securely until it clicks into place.
4. Power connection: Plug into dedicated 120V AC outlet. Do not use extension cord.

WARNING! Ensure unit is upright for at least 24 hours before first use if transported on its side. Keep away from heat sources and water splashes.

First-Time Setup

Plug in unit; control panel will illuminate.

1. Set desired humidity: Press HUMIDITY SET button to select between 35% and 85% RH (Relative Humidity).
2. Select fan speed: Choose between HIGH and LOW fan settings.
3. Set timer (optional): Use TIMER button to program automatic on/off cycles.
4. For continuous drain: Connect 5/8" ID hose to drain port and place other end in floor drain or sink.

CAUTION! Do not operate without water bucket or filter properly installed. Ensure bucket is empty before starting.

Specifications

• Model: FDR30S1
• Capacity: 30 pints per day (at 80°F, 60% RH)
• Power Source: 115V, 60Hz, 4.5A
• Coverage Area: Up to 1500 sq. ft. in moderate humidity conditions
• Operating Temperature: 41°F to 95°F (5°C to 35°C)
• Water Bucket Capacity: 14 pints (1.75 gallons)
• Noise Level: 51 dB on low fan speed
• Dimensions: 15.4" W x 11.0" D x 19.7" H
• Weight: 33.5 lbs
• Refrigerant: R-410A

Controls and Settings

Electronic control panel with digital display and touch buttons.

Control Panel: POWER button, HUMIDITY SET (+/-), FAN SPEED (HIGH/LOW), TIMER SET, FILTER ALERT indicator, BUCKET FULL indicator.

Humidity Control: Set between 35% and 85% RH in 5% increments. Unit will cycle on/off to maintain set point. Fan Speed: HIGH for maximum moisture removal, LOW for quiet operation. Timer: Program up to 24 hours for automatic start/stop. Filter Alert: Light illuminates when filter needs cleaning (approximately every 250 hours). Bucket Full: Light illuminates and unit shuts off when bucket needs emptying.

Connecting Drainage

Two drainage options: bucket collection or continuous drain.

1. Bucket method: Unit automatically shuts off when bucket is full. Remove, empty, and replace bucket.
2. Continuous drain: Remove bucket, attach 5/8" ID hose to drain port, route hose to floor drain or sink.
3. Gravity drain: Ensure drain location is lower than dehumidifier drain port.

Tip: For continuous operation, use hose included with accessory kit or purchase separately. Ensure hose is not kinked.

Operation Modes

Multiple operating modes for different needs.

1. Normal dehumidification: Set desired humidity level; unit runs until level is reached.
2. Continuous mode: Set humidity to lowest setting (35%) for constant operation.
3. Auto-defrost: Automatically activates when coil temperature drops below 41°F.
4. Timer mode: Set unit to turn on/off at specific times for energy savings.
5. Fan only mode: Press FAN button twice to circulate air without dehumidifying.

WARNING! Do not operate below 41°F for extended periods without auto-defrost function. Do not block air intake or exhaust.

Maintenance

Regular maintenance ensures optimal performance and longevity.

• Clean filter every 250 hours or when FILTER alert light illuminates.
• Empty and clean water bucket monthly with mild detergent.
• Clean exterior with soft, damp cloth only.
• Check drain hose for clogs if using continuous drain.
• Store unit upright in dry location if not used for extended period.

Care & Cleaning

Unplug unit before any cleaning or maintenance.

1. Filter cleaning: Remove filter, rinse under warm water, air dry completely before reinstalling.
2. Bucket cleaning: Empty bucket, wash with mild detergent, rinse thoroughly.
3. Exterior cleaning: Wipe with soft, damp cloth. Do not use abrasive cleaners.
4. Coil cleaning: Use soft brush to remove dust from rear coil annually.

CAUTION! Never immerse unit in water. Do not use chemicals on plastic parts. Ensure filter is completely dry before reinstalling.

Regulatory Information

UL Listed. Energy Star certified. Meets EPA energy efficiency guidelines. Manufactured for Frigidaire. For support, visit www.frigidaire.com or contact 1-800-374-4432. This product contains refrigerant that must be disposed of properly by certified technicians. Copyright © Frigidaire. All rights reserved.

Troubleshooting

Reset: Unplug unit for 5 minutes to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com