Frigidaire FDM30R1ENG13 Dehumidifier Manual

The Frigidaire FDM30R1ENG13 is a 30-pint capacity dehumidifier designed for medium-sized rooms up to 1500 sq. ft. It features an Energy Star certification, automatic humidity control, continuous drain option, washable air filter, full bucket alert with auto-shutoff, and electronic controls with digital display. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Storage Instructions 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Electronic control panel, Water collection bucket, Washable air filter, Continuous drain hose connection, Carrying handles, Digital humidity display.

Feature	Description
Capacity	30 pints per day (at 60°F, 60% RH)
Coverage Area	Up to 1500 square feet
Humidity Control	Automatic with adjustable set point (35%-85%)
Bucket Full Alert	Indicator light and auto-shutoff when bucket is full
Continuous Drain	Option for hose connection (hose not included)
Air Filter	Washable, removable filter
Controls	Electronic touchpad with digital display
Energy Star	Certified for energy efficiency
Power Cord	6-foot length with plug
Wheels & Handles	For easy portability

Installation & Placement

Unpack and inspect contents. Place on a level, stable floor.

Choose location: Place in center of room for best air circulation, away from walls and furniture.
Clearance: Ensure at least 12 inches of clearance on all sides, especially air intake and exhaust.
Check bucket: Ensure water collection bucket is properly seated and locked in place.
Power connection: Plug into a dedicated 115V AC, 60Hz outlet. Do not use an extension cord.

WARNING! Do not operate in temperatures below 41°F (5°C). Ensure the unit is upright for at least 24 hours before first use if it was tilted during transport.

First-Time Setup

Plug in the unit; the control panel will illuminate.

Set desired humidity: Press the HUMIDITY SET button to select your desired level (40%-60% recommended for comfort).
Select fan speed: Choose between HIGH (faster dehumidification) or LOW (quieter operation).
Optional continuous drain: Connect a standard garden hose (¾") to the drain port at the back if continuous drainage is preferred.
Start operation: Press the POWER button to begin dehumidification. The compressor may take 3 minutes to start.

CAUTION! Always handle the unit by the handles. Do not tip or invert.

Specifications

Model: FDM30R1ENG13
Dehumidification Capacity: 30 pints/day (at AHAM conditions: 60°F, 60% RH)
Recommended Room Size: Up to 1500 sq. ft.
Power Requirements: 115V AC, 60Hz, 3.5 Amps
Water Tank Capacity: 1.8 gallons (approx.)
Operating Temperature Range: 41°F to 95°F (5°C to 35°C)
Refrigerant: R-410A
Noise Level: ≤ 51 dB on Low fan speed
Product Dimensions (HxWxD): 19.6" x 15.4" x 11.0"
Weight: 33.5 lbs

Controls and Settings

Access all functions via the electronic control panel on top of the unit.

Control Panel: POWER button, HUMIDITY SET buttons (Up/Down), FAN SPEED button (High/Low), BUCKET FULL indicator light, FILTER CHECK indicator light, digital humidity display.

Humidity Control: Set desired level from 35% to 85% in 5% increments. The unit will cycle on/off automatically to maintain this level. Fan Speed: HIGH for maximum moisture removal, LOW for quiet nighttime operation. Indicators: BUCKET FULL light illuminates and unit shuts off when tank is full. FILTER CHECK light illuminates when the air filter needs cleaning (after 250 hours of operation).

Operation Modes

Standard Mode: Set desired humidity and fan speed. Continuous Mode: Set humidity to "CONT" for continuous operation until manually turned off or bucket is full. Laundry Drying Mode: Place in a closed room with wet laundry; set to Continuous mode and High fan speed to accelerate drying.

For normal room dehumidification, set humidity to 50% and fan to HIGH.
For quiet operation (e.g., bedroom), set fan to LOW.
To protect a storage space from dampness, set humidity to a low level (e.g., 35%).

Tip: Close windows and doors in the room for most efficient operation.

Maintenance & Cleaning

Supports long life with regular maintenance.

Empty water bucket: When BUCKET FULL light comes on, power off, remove bucket, empty water, and replace securely.
Clean air filter: When FILTER CHECK light illuminates, remove filter, rinse under lukewarm water, let dry completely, and reinstall.
Clean exterior: Unplug unit. Wipe cabinet with a soft, damp cloth. Do not use harsh chemicals.
Clean bucket: Periodically wash bucket with mild detergent to prevent mold/mildew.
End-of-season cleaning: Follow storage instructions below.

WARNING! Always unplug the unit before any maintenance. Do not immerse in water.

Storage Instructions

Prepare unit for long-term storage (e.g., winter months).

Unplug the unit.
Empty and clean the water bucket. Let it air dry.
Clean the air filter and let it dry.
Run the unit in FAN ONLY mode (set humidity to lowest setting) for 30 minutes in a warm room to dry the internal coils.
Coil and secure the power cord.
Store upright in a cool, dry place. Cover with a cloth or bag to prevent dust.

CAUTION! Do not store in a damp location or where temperatures may fall below freezing.

Regulatory Information

This appliance complies with FCC Part 15 Subpart B. It may not cause harmful interference and must accept any interference received. Energy Star qualified. For support, visit www.frigidaire.com or contact Frigidaire Consumer Services at 1-800-374-4432. This product contains refrigerant; disposal must comply with federal and local regulations.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not start	No power / Bucket full	Ensure unit is plugged in and outlet works. Check if bucket is full and properly seated.
Little or no water collection	Low humidity / Cold room	Room humidity may already be low. Unit does not remove water effectively below 41°F.
Unit runs but room feels damp	Room too large / Doors open	Ensure room size is within 1500 sq. ft. Close windows and exterior doors.
Loud or unusual noise	Uneven floor / Loose parts	Place unit on a hard, level surface. Ensure nothing is touching the cabinet.
FILTER CHECK light is on	Dirty air filter	Clean the washable air filter as instructed.
Error Code "E1" or "E2"	Sensor fault	Unplug unit for 5 minutes, then plug back in. If error persists, contact service.

Reset: Unplug the unit for 5 minutes to reset the electronic control system.

Service: 1-800-374-4432; www.frigidaire.com