Frigidaire FDM30R1ENG11 Dehumidifier Manual

The Frigidaire FDM30R1ENG11 is a 30-pint capacity dehumidifier designed for residential use, featuring electronic controls, automatic humidity sensing, continuous drain option, washable air filter, auto restart, and a 24-hour timer. It operates on 115V, 60Hz power and is ideal for areas up to 500 sq. ft. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Storage Instructions 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Electronic control panel with digital display, washable filter, removable water bucket with handle and full-bucket alert, continuous drain hose connection, and caster wheels for mobility.

Feature	Description
Capacity	30 pints per day (at 60°F, 90% RH)
Control Panel	Electronic touch controls with LED display
Humidity Control	Auto humidity sensing with adjustable set point (35%-85%)
Water Removal	Removable 1.8-gallon bucket or continuous drain option
Air Filter	Washable mesh filter
Timer	24-hour programmable on/off timer
Auto Restart	Resumes previous settings after power interruption
Auto Defrost	Prevents coil freezing in low temperatures
Mobility	Four caster wheels for easy movement
Power Cord	6-foot cord with storage wrap

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place at least 12 inches from walls and furniture for proper airflow.
Level Surface: Ensure unit is level to prevent water leakage.
Drain Options: Choose between bucket collection or continuous drain hose connection.
Power Connection: Plug into dedicated 115V, 60Hz outlet. Do not use extension cord.

WARNING! Do not operate in temperatures below 41°F (5°C). Ensure proper ventilation around unit.

First-Time Setup

Plug in unit; allow 10 minutes for system to stabilize before operation.

Select Mode: Press POWER button, then select desired mode (Auto, Continuous, or Custom).
Set Humidity: Use UP/DOWN arrows to set target humidity (35%-85%).
Timer Setup: Press TIMER button to program on/off schedule.
Check Filter: Ensure washable filter is clean and properly installed.

CAUTION! Handle water bucket carefully when full. Empty before it overflows.

Specifications

Model: FDM30R1ENG11
Dehumidification Capacity: 30 pints/day (at 60°F, 90% RH)
Water Bucket Capacity: 1.8 gallons
Operating Conditions: 41°F to 95°F (5°C to 35°C)
Power Requirements: 115V, 60Hz, 3.5A
Air Flow: 165 CFM
Coverage Area: Up to 500 sq. ft.
Noise Level: ≤ 51 dB
Dimensions: 15.4" W × 11.4" D × 19.9" H
Weight: 33 lbs

Controls and Settings

Control Panel: POWER, MODE, HUMIDITY SET, FAN SPEED (Low/High), TIMER, FILTER RESET.

Display Indicators: Current humidity, set point, timer status, filter alert, bucket full, defrost mode.

Modes: AUTO (maintains set humidity), CONTINUOUS (runs continuously), CUSTOM (manual fan speed). Humidity Control: Adjustable 35%-85% in 5% increments. Timer: 24-hour programmable on/off schedule. Fan Speed: Low for quiet operation, High for maximum moisture removal.

Operation Modes

Auto Mode: Unit cycles on/off to maintain set humidity level. Continuous Mode: Runs constantly until manually turned off. Custom Mode: User-selectable fan speed with manual humidity control.

Press POWER to turn on unit.
Press MODE to cycle through Auto, Continuous, Custom.
Use UP/DOWN arrows to adjust humidity set point.
Press FAN button to toggle between Low and High speed.
Press TIMER to set schedule (1-24 hours).

Tip: Use Auto mode for energy-efficient operation in living spaces.

Maintenance & Cleaning

Unplug unit before any maintenance. Regular cleaning ensures optimal performance.

Water Bucket: Empty regularly. Clean with mild detergent monthly.
Air Filter: Remove and wash every 2 weeks under running water. Allow to dry completely before reinstalling.
Exterior: Wipe with soft, damp cloth. Do not use abrasive cleaners.
Coils: Vacuum dust from rear coils every 3 months.
Drain Hose: Flush with clean water if using continuous drain.

WARNING! Never operate without filter. Do not immerse unit in water.

Storage Instructions

For long-term storage (over 30 days):

Unplug unit and allow to sit upright for 24 hours.
Empty and clean water bucket thoroughly.
Clean air filter and ensure it's completely dry.
Wrap power cord around cord hooks.
Store in cool, dry place protected from dust.
Cover unit with original box or breathable cloth.

CAUTION! Store in upright position. Do not place heavy objects on top.

Regulatory Information

UL Listed: Meets UL 474 safety standards. Energy Star: Certified for energy efficiency. FCC Part 15: Class B digital device; complies with interference limits. Copyright © Frigidaire; trademarks of Electrolux Home Products, Inc. For support, visit www.frigidaire.com or contact 1-800-374-4432.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not turning on	Power issue	Check power outlet; ensure plug is secure; test outlet with another device.
Not removing moisture	Filter/conditions	Clean filter; ensure room temp above 41°F; check humidity set point.
Water leakage	Bucket/placement	Ensure bucket properly seated; check unit is level; inspect drain hose connection.
Loud noise	Vibration/obstruction	Ensure unit on level surface; check for objects touching unit; clean fan blades.
Bucket full light on	Bucket full/drain	Empty bucket; ensure continuous drain hose not kinked if used.
Ice on coils	Low temperature	Auto defrost should activate; move to warmer area if below 41°F.

Reset: Unplug for 5 minutes, then restart. Press FILTER RESET after cleaning filter.

Service: 1-800-374-4432; www.frigidaire.com