Frigidaire FDL70S1ENG11 Dehumidifier Manual

The Frigidaire FDL70S1ENG11 is a 70-pint dehumidifier designed for residential use, featuring electronic controls, automatic humidity sensing, continuous drain option, washable air filter, auto-restart after power interruption, and energy-efficient operation. Ideal for basements, living areas, and other spaces up to 4500 sq. ft. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drainage 7. Operation Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, built-in humidistat, front air intake, washable filter, water collection bucket, continuous drain port, casters for mobility.

Feature	Description
Electronic Controls	Digital display with touchpad for humidity and fan settings
Automatic Humidity Control	Set desired humidity level (35% - 85%)
Continuous Drain Option	Garden hose connection for unattended operation
Washable Air Filter	Captures dust and airborne particles; reusable
Auto-Restart	Resumes previous settings after power outage
Full Bucket Alert	Indicator light and auto shut-off when bucket is full
Turbo Mode	High-speed dehumidification for maximum moisture removal
24-Hour Timer	Program on/off cycles for energy savings
Filter Check Alert	Reminder light to clean the air filter
Casters	Four wheels for easy room-to-room mobility

Installation

Unpack and inspect contents. Place on level, stable surface.

Positioning: Allow at least 12 inches clearance on all sides for proper airflow.
Power Connection: Plug into a grounded 120V AC outlet. Do not use extension cords.
Bucket Installation: Ensure water collection bucket is securely in place.
Continuous Drain Setup: Attach standard garden hose to drain port (optional).

WARNING! Do not operate in temperatures below 41°F (5°C). Ensure unit is upright for at least 24 hours before first use if transported on its side.

First-Time Setup

Plug in unit; control panel will illuminate.

Set Humidity Level: Press HUMIDITY button, use arrows to set desired RH (recommended 45-50%).
Select Fan Speed: Press FAN button to choose LOW or HIGH (Turbo) speed.
Timer Programming: Press TIMER to set automatic on/off schedule.
Check Filter: Ensure filter is clean and properly installed.

CAUTION! Do not block air intake or exhaust grilles. Place away from curtains and furniture.

Specifications

Model: FDL70S1ENG11
Capacity: 70 pints per day (at 60°F, 60% RH)
Coverage Area: Up to 4500 sq. ft.
Power Supply: 120V, 60Hz, 7.5A
Water Bucket Capacity: 16 pints
Operating Temperature: 41°F to 95°F (5°C to 35°C)
Noise Level: 52 dB on low speed
Refrigerant: R-410A
Dimensions (HxWxD): 24.5" x 15.5" x 13.5"
Weight: 46 lbs

Controls and Settings

Control Panel: POWER, HUMIDITY +/- buttons, FAN (Low/High), TIMER, FILTER CHECK indicator, FULL BUCKET light.

Display: Shows current room humidity, set humidity level, fan speed, timer status, and alerts.

Humidity Setting: Adjust between 35% and 85% RH. Fan Speed: LOW for quiet operation, HIGH for maximum moisture removal. Timer: Program 1-24 hours for automatic start/stop. Filter Check: Light illuminates when filter needs cleaning. Bucket Full: Unit automatically stops when bucket is full; light turns on.

Connecting Drainage

For continuous operation, use the drain hose connection.

Turn off and unplug unit.
Remove bucket and locate drain port on back of unit.
Insert garden hose (¾" diameter) securely into port.
Route hose to floor drain, sink, or sump pump (downward slope required).
Replace bucket (unit will not operate without bucket in place).

Tip: Ensure hose is free of kinks and blockage for proper drainage.

Operation Modes

Supports automatic humidity control and manual operation.

Auto Mode: Set desired humidity; unit cycles on/off to maintain level.
Continuous Mode: Set humidity to lowest setting (35%) for constant dehumidification.
Turbo Mode: Press FAN to select HIGH for fastest moisture removal.
Timer Mode: Program unit to turn on/off at specific times.
Laundry Drying: Place in closed room with wet laundry to accelerate drying.

WARNING! Do not use in confined spaces with flammable vapors. Keep children away from unit.

Maintenance

Regular maintenance ensures optimal performance and longevity.

Daily: Check and empty water bucket as needed.
Weekly: Clean air filter under running water; dry completely before reinstalling.
Monthly: Wipe exterior with soft, damp cloth.
Seasonal: Store unit upright in dry location when not in use for extended periods.

Care & Cleaning

Unplug before cleaning. Use mild detergent and soft cloth for exterior. Never immerse unit in water.

CAUTION! Do not use harsh chemicals, abrasives, or solvents. Ensure unit is completely dry before plugging back in.

Regulatory Information

UL Listed. Meets U.S. safety standards. This product contains refrigerant that must be recovered by certified technicians. For disposal, consult local regulations. Copyright © Frigidaire. For support, visit www.frigidaire.com or contact 1-800-374-4432.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not turning on	No power	Check outlet; ensure plug is secure; check circuit breaker.
Not removing moisture	Low temperature	Operate only above 41°F; check humidity setting.
Bucket full light on	Bucket full or not seated	Empty bucket; ensure it's properly inserted.
Water leaking	Hose connection or bucket	Check hose for leaks; ensure bucket is not cracked.
Loud noise	Fan obstruction	Turn off unit; check for debris in fan area.
Filter light on	Dirty filter	Clean filter as per instructions.
Ice on coils	Low temperature	Turn off unit; allow ice to melt; raise room temperature.

Reset: Unplug for 30 seconds, then restart.

Service: 1-800-374-4432; www.frigidaire.com