Frigidaire FDL60P12 Dehumidifier Manual

The Frigidaire FDL60P12 is a high-capacity 60-pint dehumidifier designed for medium to large rooms, featuring an Energy Star rating, adjustable humidistat, continuous drain option, auto-restart, washable filter, full bucket alert, and quiet operation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drainage 7. Operation Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front control panel, Water bucket, Washable air filter, Humidistat, Continuous drain port, Casters for mobility.

Feature	Description
Water Bucket	Removable 60-pint capacity with handle and full indicator
Continuous Drain Port	For hose connection to drain water automatically
Adjustable Humidistat	Set desired humidity level (35% - 85%)
Washable Air Filter	Captures airborne particles; can be cleaned
Auto Restart	Resumes previous settings after power interruption
Full Bucket Alert	Light and auto-shutoff when bucket is full
Quiet Operation	Low-noise design for home use
Energy Star Rated	Energy efficient operation
Casters	Four wheels for easy mobility
Power Cord	Standard 115V, 60Hz plug

Installation

Unpack and inspect contents. Place on level, stable floor.

Positioning: Place at least 12 inches from walls and furniture for proper airflow.
Check filter: Ensure washable filter is properly installed.
Bucket installation: Insert empty water bucket securely until it clicks.
Power connection: Plug into a grounded 115V outlet.

WARNING! Do not use extension cords. Ensure unit is upright before operation.

First-Time Setup

Plug in unit; follow control panel prompts.

Set humidity level: Turn HUMIDISTAT knob to desired setting (e.g., 45-50%).
Select fan speed: Choose HIGH or LOW on FAN SPEED switch.
Test operation: Unit will start when humidity exceeds set point.
Continuous drain (optional): Attach hose to drain port for automatic drainage.

CAUTION! Allow unit to sit upright for 24 hours if transported on its side.

Specifications

Capacity: 60 pints per day (at 60°F, 60% RH).
Coverage: Up to 1500 sq. ft. in moderate conditions.
Humidity Control: Adjustable humidistat (35% - 85%).
Fan Speeds: Two speeds (High/Low).
Water Bucket: 60-pint removable bucket with full indicator.
Drainage: Continuous drain option (hose not included).
Power: 115V, 60Hz, 6.5 Amps.
Noise Level: ≤ 55 dB on low speed.
Dimensions: 15.4" W x 11.4" D x 23.6" H.
Weight: 41 lbs.

Controls and Settings

Front Control Panel: POWER button, HUMIDISTAT knob, FAN SPEED switch (HIGH/LOW), FULL BUCKET indicator light.

Operation: POWER turns unit on/off. HUMIDISTAT sets target humidity. FAN SPEED adjusts airflow. Indicator light illuminates when bucket is full or filter needs cleaning.

Settings: Auto mode (unit cycles based on humidity). Continuous mode (runs constantly when drain hose connected). Bucket mode (collects water in bucket, shuts off when full).

Connecting Drainage

Continuous drain option for unattended operation.

Turn off and unplug unit.
Remove bucket; locate drain port on back.
Insert standard garden hose (¾” inner diameter, not included) into port.
Route hose to floor drain, sink, or outdoors (downward slope required).
Replace bucket; plug in and restart unit.

Tip: Ensure hose is secure and free of kinks to prevent leaks.

Operation Modes

Supports automatic, continuous, and bucket modes.

Automatic: Unit runs until set humidity is reached, then cycles off/on.
Continuous: Runs constantly (use with drain hose).
Bucket: Collects water in bucket; stops when full (light illuminates).
Fan Only: Set fan speed without dehumidifying (for air circulation).
Auto Restart: After power outage, resumes previous settings automatically.

WARNING! Empty bucket promptly to prevent overflow and mildew.

Maintenance

Regular maintenance ensures optimal performance.

Clean filter every 2 weeks: Remove, rinse with water, dry completely.
Empty bucket: When full or before storage.
Clean exterior: Use damp cloth; never use harsh chemicals.
Inspect drain hose: Ensure clear of clogs if used.
Off-season storage: Empty all water, clean, and store in dry place.

Care & Cleaning

Unplug before cleaning. Use mild detergent and soft cloth for exterior. Clean bucket with water and mild soap; rinse thoroughly.

CAUTION! Do not immerse unit in water. Never use gasoline or solvents.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	Power/humidity setting	Ensure plugged in; set humidistat above room humidity.
Little/no water collection	Room conditions/filter	Check room temp (above 65°F); clean air filter.
Bucket full light on	Bucket full/not seated	Empty bucket; ensure bucket is properly inserted.
Unit cycles off quickly	Dirty filter/frost	Clean filter; if cold room, unit may defrost automatically.
Unusual noise	Loose parts/bucket	Ensure bucket is secure; check for obstructions near fan.
Water leakage	Hose connection/bucket	Check hose for kinks; ensure bucket is properly positioned.

Reset: Unplug for 10 minutes, then restart.

Service: 1-800-374-4432; www.frigidaire.com