Frigidaire FDL60P11 Dehumidifier Manual

The Frigidaire FDL60P11 is a high-capacity 60-pint dehumidifier designed for residential use in areas up to 1500 square feet. It features electronic controls with a digital humidistat, automatic restart, continuous drain option, washable air filter, full bucket alert with auto shut-off, and 24-hour timer. This manual covers safety instructions, features, installation, operation, maintenance, troubleshooting, and warranty information.

1. Features at a Glance 2. Safety Instructions 3. Installation & Placement 4. Specifications 5. Controls and Settings 6. Operation Guide 7. Maintenance & Cleaning 8. Storage Instructions 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Electronic control panel, 60-pint water collection bucket, washable air filter, continuous drain hose connection, casters for mobility, and digital display.

Feature	Description
Dehumidification Capacity	60 pints per day at 80°F, 60% RH
Digital Humidistat	Precise humidity level control from 35% to 85%
Electronic Controls	Touch-button operation with LED display
Continuous Drain Option	Garden hose connection for unattended operation
Auto Restart	Resumes previous settings after power interruption
Full Bucket Alert & Auto Shut-off	Stops operation and lights indicator when bucket is full
24-Hour Timer	Programmable on/off cycles
Washable Air Filter	Removable filter for easy cleaning
Low Temperature Operation	Down to 41°F (5°C)
Casters	Four wheels for easy room-to-room mobility

Safety Instructions

Read all instructions before installation and operation.

Plug into a grounded 115V AC, 60Hz outlet only. Do not use extension cords.
Ensure unit is placed on a level, stable surface away from heat sources.
Do not operate with damaged cord or plug. Disconnect power before servicing.
Do not block air intake or exhaust grilles. Maintain 12 inches of clearance.
Empty water bucket regularly and handle with care to avoid spills.

WARNING! Risk of electric shock. Do not immerse unit in water or use in wet conditions. Keep children away from controls.

Installation & Placement

Unpack and inspect contents. Allow unit to stand upright for 24 hours if transported on its side.

Choose location: Place in center of room for best air circulation, away from walls and furniture.
Level surface: Ensure unit is level to prevent water leakage.
Connect drain hose (optional): Attach ½" garden hose to drain port for continuous drainage.
Plug in: Connect to dedicated 115V outlet. The control panel will illuminate.

CAUTION! Do not install in areas below 41°F (5°C) to prevent coil freezing.

Specifications

Model: FDL60P11
Dehumidification: 60 Pints/Day (AHAM @ 80°F, 60% RH)
Coverage Area: Up to 1500 sq. ft.
Power Supply: 115V AC, 60Hz, 6.5 Amps
Refrigerant: R410A
Water Bucket Capacity: 15 pints (removable)
Air Flow: 200 CFM
Operating Temperature: 41°F to 95°F (5°C to 35°C)
Noise Level: 52 dB (Low Fan Speed)
Dimensions (HxWxD): 23.6" x 15.4" x 11.4"
Weight: 41 lbs

Controls and Settings

Control Panel: POWER, FAN SPEED (High/Low), HUMIDITY SET, TIMER, FILTER RESET.

Display: Current humidity, set humidity, timer status, filter alert, full bucket indicator.

Humidity Control: Press HUMIDITY SET to adjust desired level (35%-85%). Fan Speed: Select High for maximum moisture removal or Low for quiet operation. Timer: Set 1-24 hours for automatic start/stop. Filter Alert: LED lights when filter needs cleaning (press FILTER RESET after cleaning).

Operation Guide

For optimal performance, close windows and doors in the room being dehumidified.

Press POWER to turn unit on.
Set desired humidity using HUMIDITY SET buttons.
Select fan speed (High recommended for initial moisture removal).
Unit will run until set humidity is reached, then cycle on/off automatically.
For continuous operation, set humidity to lowest setting (35%).
Use TIMER to program daily operation schedule.
Empty bucket when FULL indicator lights and unit shuts off.

Tip: For maximum efficiency, keep room temperature above 65°F (18°C).

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Unplug unit before any maintenance.
Air Filter: Clean every 2 weeks. Remove filter, wash with warm water and mild detergent, dry completely before reinstalling.
Water Bucket: Empty and clean monthly with mild detergent. Rinse thoroughly.
Exterior: Wipe with damp cloth. Do not use abrasive cleaners.
Grilles and Coils: Vacuum dust buildup every 3 months.
End of Season: Drain all water, clean thoroughly, and store properly.

CAUTION! Never operate without air filter. Do not use harsh chemicals on plastic components.

Storage Instructions

Prepare unit for extended non-use (e.g., winter months).

Unplug unit and empty water bucket completely.
Clean filter, bucket, and exterior as described in Maintenance section.
Coil dry run: Run unit in fan-only mode for 24 hours to dry internal components.
Store in upright position in dry, covered area.
Cover unit to prevent dust accumulation.

Note: For best results, store at room temperature. Avoid extreme cold or damp locations.

Regulatory Information

This dehumidifier complies with FCC Part 15 Subpart B for Class B digital devices. Manufactured to meet UL 474 safety standards. EPA refrigerant compliance: Uses R410A. Copyright © Frigidaire. Frigidaire is a registered trademark of AB Electrolux. For support, visit www.frigidaire.com or contact customer service at 1-800-374-4432.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	No power, full bucket	Check outlet; reset GFCI; empty bucket; ensure filter is clean.
Poor dehumidification	Room too cold, dirty filter	Raise room temp above 65°F; clean filter; close windows/doors.
Water leakage	Unit not level, bucket not seated	Level unit; ensure bucket is properly inserted; check drain hose connection.
Loud noise/vibration	Uneven surface, loose parts	Place on level floor; check for foreign objects in fan area.
Display not working	Power issue	Check power cord connection; try different outlet; reset circuit breaker.
Frost on coils	Low temperature operation	Turn unit off; allow frost to melt; raise room temperature above 41°F.

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com. Do not attempt to repair sealed refrigerant system.