Frigidaire FDL60P1 Dehumidifier Manual

The Frigidaire FDL60P1 is a high-capacity 60-pint dehumidifier designed for residential use, featuring automatic humidity control, continuous drain option, washable filter, auto-restart after power interruption, full bucket alert with auto-shutoff, and energy-efficient operation. Below are key sections covering safety, features, installation, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Control panel with digital display, Water collection bucket, Washable air filter, Continuous drain hose connection, Carrying handles, Cord storage.

Installation & Placement

Unpack and inspect contents. Place on level surface in area requiring dehumidification.

1. Remove all packaging materials and tape.
2. Position unit: Place on firm, level floor at least 12 inches from walls and furniture.
3. Ensure proper airflow: Keep air intake and discharge grilles unobstructed.
4. Check power requirements: Use dedicated 115V AC, 60Hz outlet; avoid extension cords.
5. Install drain hose (optional): Attach to continuous drain port if using hose drainage.

WARNING! Do not operate in temperatures below 41°F (5°C). Ensure unit is upright for at least 24 hours before first use if transported on its side.

First-Time Setup

Plug into power outlet; follow initial setup procedure.

1. Insert water bucket: Ensure bucket is properly seated and locked in position.
2. Power on: Press POWER button; unit will beep and display will illuminate.
3. Set humidity level: Use UP/DOWN buttons to select desired humidity (45-50% recommended).
4. Select fan speed: Choose HIGH or LOW fan setting based on room conditions.
5. Set timer (optional): Program 24-hour on/off schedule if desired.
6. Check filter: Verify filter is clean and properly installed.

CAUTION! Handle with care when moving; use two people if unit is heavy. Do not tilt during operation.

Specifications

• Model: FDL60P1
• Dehumidification Capacity: 60 pints per day (at 60°F, 60% RH)
• Power Requirements: 115V AC, 60Hz, 7.5A
• Water Bucket Capacity: 60 pints (removable)
• Operating Temperature: 41°F to 95°F (5°C to 35°C)
• Air Flow: 165 CFM (High setting)
• Noise Level: 52 dB (Low fan speed)
• Dimensions: 15.4" W × 11.4" D × 24.3" H
• Weight: 41.9 lbs
• Refrigerant: R-410A
• Certifications: ENERGY STAR®, ETL Listed

Controls and Settings

Control Panel: POWER, HUMIDITY SET, FAN SPEED, TIMER, FILTER RESET. Digital Display: Current humidity, Set point, Timer status, Filter alert, Bucket full indicator.

Humidity Control: Adjust between 35%-85% RH in 5% increments. Fan Speed: HIGH for maximum moisture removal, LOW for quiet operation. Timer: Program 24-hour schedule for automatic operation. Continuous Operation: Select "CONTINUOUS" mode for maximum dehumidification. Filter Monitor: LED alerts when filter needs cleaning (reset after cleaning).

Operating Instructions

Normal operation with bucket collection or continuous drain.

1. Power on: Press POWER button; display shows current room humidity.
2. Set desired humidity: Use UP/DOWN buttons to select target humidity level.
3. Select mode: Choose between AUTO (maintains set point) or CONTINUOUS (runs constantly).
4. Monitor operation: Compressor cycles on/off automatically to maintain set humidity.
5. Empty bucket: When FULL indicator lights and alarm sounds, remove and empty bucket.
6. Restart: After emptying bucket, reinsert properly; unit resumes operation automatically.
7. Use timer: Set ON/OFF times for energy savings during specific hours.

Tip: For best results, keep doors and windows closed during operation.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Clean air filter: Remove and wash filter every 2-4 weeks with warm, soapy water.
2. Dry filter completely: Allow filter to air dry 24 hours before reinstalling.
3. Reset filter indicator: Press and hold FILTER button for 3 seconds after cleaning.
4. Clean water bucket: Empty and wash bucket monthly with mild detergent.
5. Clean exterior: Wipe cabinet with soft, damp cloth; never use harsh chemicals.
6. Check drain hose: Ensure continuous drain hose is clear of obstructions.
7. Inspect grilles: Keep intake and discharge grilles free of dust and debris.

WARNING! Always unplug unit before cleaning or maintenance. Do not immerse in water.

Drainage Options

Two methods for water removal: bucket collection or continuous drain.

Bucket Collection: Standard method using removable bucket. Empty when FULL indicator lights. Continuous Drain: Attach 5/8" ID hose to drain port at rear. Ensure hose runs downward without kinks. Place drain end in floor drain, sink, or outdoors. Gravity Drainage: Unit must be level or slightly tilted toward drain port. Maximum hose length: 10 feet. Pump Option: For upward drainage, use optional condensate pump (not included).

Care & Storage

Proper care extends unit life and maintains efficiency.

1. End-of-season storage: Clean thoroughly before storing.
2. Empty all water: Drain bucket and hose completely.
3. Clean filter: Wash and dry filter before storage.
4. Coil cord: Use built-in cord storage wraps.
5. Store upright: Keep in dry, protected area.
6. Cover unit: Use original packaging or breathable cover.
7. Pre-season check: Inspect and clean before next use.

CAUTION! Do not store with water in bucket or lines. Store in temperature-controlled environment.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Frigidaire; trademarks of Electrolux Home Products, Inc. ENERGY STAR®: Meets strict energy efficiency guidelines set by the U.S. EPA. ETL Listed: Verified for electrical safety. For support, visit www.frigidaire.com or contact 1-800-374-4432.

Troubleshooting

Reset: Unplug unit for 5 minutes to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com