Frigidaire FDL60P Dehumidifier Manual

The Frigidaire FDL60P is a high-capacity dehumidifier designed to remove up to 60 pints of moisture per day from the air in spaces up to 1,500 square feet. It features electronic controls, a digital display, adjustable humidity settings, continuous drainage option, auto-restart, washable air filter, and a full-bucket alert with automatic shut-off. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic control panel, Digital humidity display, Water collection bucket, Continuous drain hose port, Washable air filter, Carrying handles, Caster wheels.

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

1. Clear area: Ensure at least 12 inches of clearance on all sides for proper airflow.
2. Position near drain: If using continuous drain, place within 5 feet of floor drain or sink.
3. Check level: Unit must be level for bucket to seat properly and for efficient operation.
4. Plug into dedicated outlet: Use 115V, 60Hz grounded outlet only. Do not use extension cord.

WARNING! Do not place in areas below 41°F (5°C) to prevent coil freezing. Keep away from heat sources and direct sunlight.

First-Time Setup

Plug in unit; control panel will illuminate.

1. Install bucket: Ensure water collection bucket is properly seated and locked in place.
2. Set humidity: Press HUMIDITY button to select desired level (40-50% recommended for comfort).
3. Select fan speed: Choose LOW for quiet operation or HIGH for faster dehumidification.
4. Set timer (optional): Use TIMER button to program automatic shut-off or start times.
5. Check filter: Verify air filter is clean and properly installed.

CAUTION! Handle bucket carefully to avoid spills. Unit must remain upright during operation.

Specifications

• Model: FDL60P
• Capacity: 60 pints per day (AHAM verified at 80°F, 60% RH)
• Coverage: Up to 1,500 sq. ft.
• Power Requirements: 115V, 60Hz, 7.0 Amps
• Water Bucket Capacity: 16 pints (with full indicator)
• Air Flow: 165 CFM (High speed)
• Operating Temperature: 41°F to 95°F (5°C to 35°C)
• Noise Level: 52 dB on Low setting
• Dimensions: 15.4" W × 11.4" D × 23.6" H
• Weight: 46.3 lbs
• Refrigerant: R-410A

Controls and Settings

Control Panel: POWER button, HUMIDITY adjustment, FAN speed (LOW/HIGH), TURBO mode, TIMER, FILTER reset indicator, BUCKET FULL indicator.

Display Icons: Current humidity %, Set humidity %, Fan speed, Turbo mode, Timer setting, Filter alert, Bucket full.

Humidity Control: Adjust in 5% increments from 35% to 80%. Fan Speed: LOW for quiet operation, HIGH for maximum air flow. Turbo Mode: Activates maximum dehumidification for 10 minutes then returns to previous setting. Timer: Program from 1 to 24 hours for automatic on/off cycles. Filter Reset: Press and hold FILTER button for 3 seconds after cleaning filter.

Operation Modes

Normal Operation: Set desired humidity level, unit runs until humidity is reached then cycles on/off automatically.

1. Continuous Mode: Set humidity to 35% for continuous operation regardless of room humidity.
2. Turbo Mode: Press TURBO for maximum moisture removal in high humidity conditions.
3. Timer Operation: Set TIMER for automatic operation during specific hours.
4. Auto-Defrost: Unit automatically defrosts coils when temperature drops below 65°F.

Tip: For best efficiency, keep doors and windows closed while dehumidifier is running.

Maintenance & Cleaning

Unplug unit before performing any maintenance.

1. Clean air filter: Remove filter every 2 weeks, wash with warm water and mild detergent, air dry completely before reinstalling.
2. Empty water bucket: When FULL light illuminates, remove bucket carefully, pour out water, replace securely.
3. Clean exterior: Wipe with soft, damp cloth. Do not use abrasive cleaners or solvents.
4. Clean bucket: Monthly, wash bucket with mild detergent to prevent mold/mildew.
5. End-of-season storage: Empty all water, clean filter and bucket, wrap cord, cover unit, store upright in dry location.

WARNING! Never operate without filter installed. Do not immerse unit in water.

Draining Options

Bucket Drainage: Standard method, empty when FULL light illuminates (approximately every 8-12 hours at maximum capacity).

Continuous Drainage: Connect standard garden hose (not included) to drain port at back of unit. Ensure hose runs downward to floor drain or sink. Unit must be level or slightly tilted toward drain port.

CAUTION! For continuous drain, check hose regularly for kinks or blockages. Ensure drain location can handle water volume.

Safety Features

Full-Bucket Shut-off: Automatically stops operation when bucket is full, POWER light flashes. Auto-Restart: After power interruption, resumes previous settings when power returns. Tip-Over Switch: Stops operation if unit is knocked over. Overload Protection: Motor protection against electrical overload. Child Lock: Press and hold TURBO and TIMER for 3 seconds to lock controls.

Regulatory Information

UL Listed: Meets UL standard 474. Energy Star: Certified for energy efficiency. EPA Refrigerant: Uses R-410A, an environmentally friendly refrigerant. FCC Compliance: Part 15 Class B digital device. Copyright © Frigidaire. For support, visit www.frigidaire.com or contact 1-800-374-4432.

Troubleshooting

Reset: Unplug unit for 10 minutes to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com