Frigidaire FDL60K2 Dehumidifier Manual

The Frigidaire FDL60K2 is a high-capacity 60-pint dehumidifier designed for residential use in medium to large rooms. It features automatic humidity control, a continuous drain option, a full-bucket alert with auto-shutoff, washable air filter, electronic controls with digital display, and 24-hour timer functionality. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic control panel, removable water bucket, continuous drain hose connection, washable air filter, casters for mobility, and digital humidity display.

Installation & Placement

Unpack and inspect contents. Choose appropriate location for optimal performance.

1. Clear area: Ensure at least 12-18 inches of clearance on all sides for proper airflow.
2. Level surface: Place on firm, level floor to prevent vibration and water leakage.
3. Temperature range: Operate in environments between 41°F (5°C) and 95°F (35°C).
4. Power connection: Plug directly into grounded 115V AC outlet; avoid extension cords.
5. Drain setup: For continuous drainage, attach hose to drain port and route to floor drain.

WARNING! Do not operate in temperatures below 41°F (5°C) to prevent coil freezing. Ensure unit is upright for at least 24 hours before first use if transported sideways.

First-Time Setup

Plug in unit; control panel will illuminate.

1. Bucket installation: Slide empty bucket completely into unit until it clicks.
2. Humidity set point: Press HUMIDITY button to set desired level (recommended 45-50%).
3. Mode selection: Choose between Continuous, Auto, or Turbo mode based on needs.
4. Timer setup: Program 24-hour timer if desired using TIMER button.
5. Filter check: Verify filter is clean and properly seated.

CAUTION! Handle water bucket with care to avoid spills. Ensure bucket is securely installed before operation.

Specifications

• Model: FDL60K2
• Dehumidification Capacity: 60 pints per day at 80°F, 60% RH
• Coverage Area: Up to 1500 sq. ft. in moderately damp conditions
• Water Bucket Capacity: 60 pints (removable)
• Power Requirements: 115V, 60Hz, 6.5A
• Operating Conditions: 41°F to 95°F (5°C to 35°C)
• Noise Level: 52 dB on standard mode
• Dimensions: 15.4" W × 11.4" D × 24.3" H
• Weight: 41.9 lbs
• Refrigerant: R410A

Controls and Settings

Electronic control panel with touch buttons and digital display.

Display Indicators: Current humidity, set point, filter alert, bucket full, timer status.

Buttons: POWER (On/Off), MODE (Continuous/Auto/Turbo), HUMIDITY (set point adjustment), TIMER (24-hour programming), FILTER (reset alert).

Operation Modes: Continuous (runs constantly), Auto (cycles based on set point), Turbo (maximum dehumidification).

Timer Programming: Set separate on and off times in 30-minute increments.

Operation Modes

Three operating modes for different moisture conditions.

1. Auto Mode: Unit cycles on/off automatically to maintain set humidity level. Most energy-efficient for maintaining conditions.
2. Continuous Mode: Runs continuously regardless of humidity level. Use for initial drying of very damp spaces.
3. Turbo Mode: Fan runs at highest speed for maximum moisture removal. Use in extremely humid conditions or for fastest drying.

Tip: Start with Turbo mode for 24 hours in very damp areas, then switch to Auto mode for maintenance.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Bucket Emptying: Empty when full indicator lights. Lift handle, carry to drain, replace securely.
2. Filter Cleaning: Clean every 2 weeks or when filter alert lights. Remove, wash with warm water, dry completely, reinstall.
3. Exterior Cleaning: Wipe with soft, damp cloth. Never use harsh chemicals or abrasives.
4. Coil Inspection: Check evaporator coil annually for dust buildup; vacuum gently if needed.
5. Drain Hose: For continuous drain, check monthly for clogs or kinks.

WARNING! Always unplug unit before cleaning. Never immerse in water or use liquid cleaners directly on unit.

Storage Instructions

Proper storage prevents damage during non-use periods.

1. Clean unit thoroughly following maintenance instructions.
2. Empty and dry water bucket completely.
3. Run in fan-only mode for 30 minutes to dry internal components.
4. Unplug and coil power cord neatly.
5. Store in upright position in dry, temperature-stable location.
6. Cover with breathable cloth to prevent dust accumulation.

CAUTION! Do not store unit with water in bucket or lines. Ensure complete dryness to prevent mold growth.

Regulatory Information

UL Listed: Certified to UL standard 474. Energy Star: Meets ENERGY STAR® requirements for energy efficiency. FCC Compliance: Part 15 Class B digital device. California Proposition 65 Warning: This product contains chemicals known to cause cancer and birth defects. For support, visit www.frigidaire.com or contact 1-800-374-4432.

Troubleshooting

Reset: Unplug unit for 5 minutes to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com