Frigidaire FDL50S1ENG13 Dehumidifier Manual

The Frigidaire FDL50S1ENG13 is a 50-pint dehumidifier designed for residential use, featuring electronic controls, automatic humidity sensing, continuous drain option, washable filter, auto-restart after power interruption, and a 24-hour timer. It operates on 115V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drain Hose 7. Operating Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, Water tank with full indicator, Washable air filter, Continuous drain port, Carrying handles, Power cord.

Feature	Description
Electronic Controls	Digital display for humidity level and settings
Automatic Humidity Control	Set desired humidity level (35% - 85%)
Continuous Drain Option	Garden hose connection for unattended operation
Washable Filter	Removable filter for easy cleaning
Auto Restart	Resumes previous settings after power outage
24-Hour Timer	Program on/off cycles
Full Tank Alert	Light and auto shut-off when tank is full
Carrying Handles	For easy portability
Power Cord Storage	Wrap cord around rear handles
Low Temperature Operation	Works down to 41°F (5°C)

Installation

Unpack and inspect contents. Place on level floor.

Choose location: Place in center of room, away from walls/furniture for proper airflow.
Check clearance: Ensure at least 12 inches of space on all sides.
Position unit: Place on smooth, level surface to prevent vibration.
Connect power: Plug into grounded 115V outlet.

WARNING! Do not use extension cords. Ensure proper ventilation around unit.

First-Time Setup

Plug in unit; control panel will illuminate.

Set humidity level: Press HUMIDITY button to select desired level (recommended 45-50%).
Select fan speed: Press FAN button for HIGH or LOW setting.
Set timer (optional): Press TIMER to program on/off schedule.
Check filter: Ensure filter is clean and properly installed.

CAUTION! Allow unit to sit upright for 24 hours if transported on its side.

Specifications

Capacity: 50 pints per day (at 80°F, 60% RH).
Coverage Area: Up to 1500 sq. ft.
Power: 115V AC, 60Hz, 6.5 Amps.
Water Tank: 1.8 gallon capacity.
Operating Temperature: 41°F to 95°F (5°C to 35°C).
Fan Speeds: 2 (High/Low).
Humidity Control: 35% to 85% RH.
Dimensions: 15.4" W × 11.4" D × 24.3" H.
Weight: 41 lbs.
Refrigerant: R-410A.

Controls and Settings

Control Panel: POWER, HUMIDITY, FAN, TIMER, FILTER RESET.

Display Indicators: Current humidity, Set humidity, Fan speed, Timer, Filter alert, Full tank.

Humidity Setting: Press HUMIDITY to cycle through 35%-85% in 5% increments. Fan Speed: HIGH for maximum moisture removal, LOW for quiet operation. Timer: Set 1-24 hours for automatic start/stop. Filter Reset: Press after cleaning filter to reset indicator. Continuous Mode: Runs continuously regardless of humidity level.

Connecting Drain Hose

For continuous drainage (optional).

Turn off and unplug unit.
Remove drain plug from back of unit.
Connect standard garden hose (¾" diameter) to drain port.
Route hose to floor drain or suitable drainage area.
Ensure hose has downward slope without kinks.

Tip: When using continuous drain, remove water tank or ensure it's empty.

Operating Modes

Three main operating modes.

Auto Mode: Unit runs until set humidity is reached, then cycles on/off automatically.
Continuous Mode: Runs continuously regardless of humidity setting.
Timer Mode: Program unit to turn on/off at specific times.
Laundry Mode: High fan speed for drying laundry in enclosed space.

WARNING! Do not operate below 41°F (5°C) to prevent coil freezing.

Maintenance

Regular maintenance ensures optimal performance.

Clean filter every 2 weeks: Remove, wash with warm water, dry completely.
Empty water tank: When full indicator lights, turn off and empty tank.
Clean exterior: Wipe with damp cloth, then dry.
End-of-season storage: Clean thoroughly, empty tank, store upright in dry place.

Care & Cleaning

Unplug before cleaning. Use mild detergent and soft cloth only.

CAUTION! Never immerse unit in water. Do not use harsh chemicals or abrasives.

Regulatory Information

UL Listed. Meets EPA Energy Star requirements. Copyright © Frigidaire. For support, visit www.frigidaire.com or contact 1-800-374-4432. This product contains refrigerant that must be recovered by certified technician.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not running	Power issue/full tank	Check power outlet; empty water tank; reset circuit breaker.
Poor dehumidification	Dirty filter/room temp	Clean filter; ensure room temp above 65°F; check doors/windows closed.
Water leakage	Improper hose connection	Check hose for kinks; ensure proper connection to drain port.
Loud noise	Uneven surface/loose parts	Place on level surface; check for loose panels or foreign objects.
Ice on coils	Low temperature	Turn off unit; allow ice to melt; increase room temperature.
Filter light on	Dirty filter	Clean filter; press FILTER RESET button.

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-374-4432; www.frigidaire.com