Frigidaire FDL50S1ENG11 Dehumidifier Manual

The Frigidaire FDL50S1ENG11 is a 50-pint dehumidifier designed for residential use, featuring electronic controls, auto-restart, continuous drain capability, a built-in humidistat, washable filter, and a 24-hour timer. It operates on 115V/60Hz power and is ideal for medium to large rooms up to 3000 sq. ft. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic control panel, Water tank with full indicator, Continuous drain hose connection, Washable air filter, Built-in humidistat, Casters for mobility.

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

1. Choose location: Place in center of room, at least 12 inches from walls and furniture for proper airflow.
2. Check clearance: Ensure at least 20 inches of overhead clearance.
3. Level unit: Adjust feet if necessary to ensure proper operation.
4. Power connection: Plug directly into a grounded 115V outlet; avoid extension cords.
5. Initial setup: Allow unit to stand upright for 24 hours if transported on its side.

WARNING! Do not place in areas with temperature below 41°F (5°C) to prevent coil freezing. Ensure power outlet is easily accessible.

First-Time Setup

Power on dehumidifier; follow control panel prompts.

1. Insert water tank: Slide empty tank completely into unit until it clicks.
2. Power on: Plug in and press POWER button.
3. Set humidity: Use UP/DOWN buttons to set desired humidity level (recommended 45-50%).
4. Select mode: Choose between Continuous, Auto, or Timer mode.
5. Check operation: Unit should begin running; check that air is discharging from vents.

CAUTION! Handle with care when moving; the unit is heavy. Use two people if necessary.

Specifications

• Model: FDL50S1ENG11
• Capacity: 50 pints per day (at 80°F, 60% RH)
• Room Size: Up to 3000 square feet
• Power: 115V, 60Hz, 6.5A
• Refrigerant: R410A
• Water Tank Capacity: 1.8 gallons
• Operating Temperature: 41°F to 95°F (5°C to 35°C)
• Humidity Range: 35% to 85% RH
• Noise Level: ≤ 55 dB
• Dimensions (HxWxD): 24.2" x 15.4" x 11.4"
• Weight: 43.7 lbs
• Certifications: ENERGY STAR® certified, UL listed

Controls and Settings

Access all functions via electronic control panel. Front Panel: POWER, MODE, TIMER, UP/DOWN buttons, FILTER indicator, FULL TANK indicator.

Display Indicators: Current humidity, Set humidity, Timer status, Filter alert, Full tank alert.

Humidity Control: Set between 35%-85% RH using UP/DOWN buttons. Modes: CONTINUOUS (runs constantly), AUTO (maintains set humidity), TIMER (programmed operation). Timer: Set 1-24 hours for automatic on/off. Filter Alert: Light illuminates when filter needs cleaning. Full Tank Alert: Light illuminates and unit shuts off when tank is full.

Operation Modes

Three operating modes for different needs.

1. Auto Mode: Unit cycles on/off automatically to maintain set humidity level. Most energy-efficient for typical use.
2. Continuous Mode: Runs continuously regardless of humidity level. Use for rapid moisture removal.
3. Timer Mode: Program unit to run for specific periods. Set 1-24 hours for automatic operation.

Tip: For normal conditions, use Auto mode with humidity set to 45-50% for optimal comfort and efficiency.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Clean Filter: Remove and wash filter every 2 weeks or when FILTER light illuminates. Use warm water and mild detergent. Air dry completely before reinstalling.
2. Empty Water Tank: Empty tank regularly or connect continuous drain hose. Clean tank monthly with mild detergent.
3. Clean Exterior: Wipe cabinet with soft, damp cloth. Do not use abrasive cleaners.
4. Check Air Vents: Keep front and rear vents clear of obstructions.
5. Off-Season Storage: Empty and clean tank, clean filter, wrap cord, and store in dry location.

WARNING! Always unplug unit before cleaning. Never immerse unit in water.

Water Drainage Options

Two methods for water removal.

1. Manual Drainage: Use removable water tank. Empty when FULL indicator lights or tank is full (approximately every 1-2 days depending on humidity).
2. Continuous Drainage: Connect 5/8" ID hose to drain port (hose not included). Place hose end in floor drain or suitable drainage area. Unit will drain automatically without tank removal.

CAUTION! Ensure continuous drain hose is properly connected and free of kinks. Place drain outlet lower than drain port for proper flow.

Safety Features

Built-in protections for safe operation.

• Auto Shutoff: Automatically stops when water tank is full.
• Auto-Restart: Resumes previous settings after power restoration.
• Overload Protection: Internal circuit breaker protects motor.
• Anti-Frost Sensor:Prevents coil freezing in low temperatures.
• Tip-Over Switch: Shuts off unit if tipped over.
• Child Lock: Press and hold TIMER button for 3 seconds to lock controls.