Frigidaire FDL45P14 Dehumidifier Manual

The Frigidaire FDL45P14 is a high-capacity 45-pint dehumidifier designed for residential use. It features automatic humidity control, continuous drain capability, a built-in humidistat, washable filter, auto-restart after power interruption, full bucket alert with auto-shutoff, and caster wheels for easy mobility. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Storage Instructions 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control Panel, Air Intake Grille, Washable Air Filter, Water Collection Bucket, Continuous Drain Hose Port, Caster Wheels, and Handle.

Feature	Description
Humidistat	Automatic humidity control with adjustable settings
Water Bucket	Removable 45-pint capacity bucket with full indicator
Continuous Drain	Port for connecting a garden hose (not included)
Auto Shut-Off	Automatically stops when bucket is full
Auto Restart	Resumes previous settings after a power outage
Washable Filter	Captures airborne particles; can be cleaned
Control Panel	Digital display with humidity readout and mode selection
Mobility	Four caster wheels for easy movement
Energy Efficiency	ENERGY STAR® certified
Timer Function	Programmable 24-hour on/off timer

Installation & Placement

Unpack and inspect contents. Place on a level, stable floor.

Positioning: Place at least 12 inches away from walls and furniture for proper air circulation.
Level Surface: Ensure unit is level to allow bucket to seat correctly and trigger auto-shutoff.
Continuous Drain Setup (Optional): Remove bucket, connect standard garden hose to drain port, route hose to floor drain or sink.
Power Connection: Plug into a dedicated 115V AC, 60Hz outlet. Do not use an extension cord.

WARNING! Do not operate in temperatures below 41°F (5°C). Ensure the room is sealed for best efficiency.

First-Time Setup

Plug in the unit; the control panel will illuminate.

Set Humidity Level: Press the HUMIDITY button to set your desired relative humidity (35% - 85%).
Select Fan Speed: Choose between HIGH (faster dehumidification) or LOW (quieter operation).
Timer Setup (Optional): Use the TIMER button to program automatic start/stop times.
Check Filter: Ensure the washable air filter is clean and properly installed.

CAUTION! Handle the water bucket with care to avoid spills. Always turn off and unplug the unit before servicing.

Specifications

Model: FDL45P14
Dehumidification Capacity: 45 pints per day (at 60% RH, 80°F)
Power Source: 115V AC, 60Hz, 4.5 Amps
Water Bucket Capacity: 45 pints (removable)
Operating Temperature Range: 41°F to 95°F (5°C to 35°C)
Air Flow: High/Low fan speed settings
Humidistat Range: 35% to 85% relative humidity
Noise Level: Approx. 52 dB on low setting
Dimensions (HxWxD): 24.0" x 15.0" x 11.5"
Weight: 41 lbs

Controls and Settings

Access all functions via the digital Control Panel on top of the unit.

Control Panel: POWER Button, HUMIDITY Up/Down Buttons, FAN SPEED Button, TIMER Button, FILTER ALERT Indicator, BUCKET FULL Indicator.

Humidity Control: Set target humidity; unit cycles on/off automatically to maintain it. Fan Speed: HIGH for maximum moisture removal, LOW for quiet nighttime operation. Timer: Program to turn on/off up to 24 hours in advance. Alerts: FILTER light indicates when to clean the filter; BUCKET FULL light and auto-shutoff engage when bucket is full.

Operation Modes

Normal Mode: Unit runs until target humidity is reached, then cycles off. Continuous Mode: Fan runs constantly regardless of humidity (press and hold FAN button for 3 sec). Laundry Mode: Optimized for drying laundry in a closed room (higher fan speed).

Press POWER to turn on.
Set desired humidity with HUMIDITY buttons.
Select fan speed.
Unit will display current room humidity and operate accordingly.

Tip: For fastest drying, close all windows and doors in the room.

Maintenance & Cleaning

Unplug unit before any maintenance.

Emptying the Bucket: When BUCKET FULL light comes on, remove bucket, pour out water, and reinsert firmly.
Cleaning the Filter: Remove filter every 2 weeks or when FILTER light is on. Rinse under warm water, let dry completely, and reinstall.
Cleaning the Exterior: Wipe cabinet with a soft, damp cloth. Do not use harsh chemicals.
End-of-Season Cleaning: Empty and dry bucket. Run unit in FAN ONLY mode for a few hours to dry the coil before storage.

WARNING! Never operate without the filter installed. Do not tip or lay the unit on its side.

Storage Instructions

If not using for an extended period:

Unplug the unit.
Empty and dry the water bucket completely.
Clean the air filter and let it dry.
Coil the power cord and secure it.
Store in a cool, dry place, preferably in its original box.

CAUTION! Store upright. Do not place heavy objects on top.

Regulatory Information

This appliance complies with FCC Part 15 Subpart B. It may not cause harmful interference and must accept any interference received. Copyright © Frigidaire. For support, visit www.frigidaire.com or contact customer service at 1-800-374-4432.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not start	No power / Bucket not seated	Ensure plug is secure; check outlet; remove and reinsert bucket firmly.
Little or no water collection	Low humidity / Cold room / Dirty filter	Check room humidity; ensure room temp >41°F; clean the air filter.
Bucket full light on, but bucket is empty	Bucket misaligned / Float stuck	Remove bucket, check for obstructions, reinsert until it clicks.
Unit is noisy or vibrating	Uneven floor / Loose parts	Place on a level surface; ensure cabinet panels are secure.
Error Code "E1" displayed	Sensor fault	Unplug for 5 minutes, then restart. If persists, contact service.

Reset: Unplug for 10 minutes to reset the control system.

Service: 1-800-374-4432; www.frigidaire.com