Frigidaire FDL25P12 Dehumidifier Manual

The Frigidaire FDL25P12 is a 25-pint capacity dehumidifier designed for residential use, featuring automatic humidistat control, continuous drain option, washable air filter, automatic defrost, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drainage 7. Operation Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, water collection bucket, continuous drain port, washable filter, and casters for mobility.

Feature	Description
Capacity	25 pints per day (at 80°F, 60% RH)
Humidistat	Automatic humidity control with digital readout
Water Bucket	Full-bucket alert and auto-shutoff
Continuous Drain	Garden hose adapter for permanent drainage
Air Filter	Washable mesh filter for air quality
Defrost System	Automatic defrost for low-temperature operation
Control Panel	Power, fan speed, humidity set, timer
Mobility	Four swivel casters and side handles
Energy Efficiency	ENERGY STAR® certified
Power Cord	6-foot length with storage wrap

Installation

Unpack and inspect contents. Place on level, stable floor.

Positioning: Allow at least 12 inches clearance on all sides for airflow.
Check bucket: Ensure water collection bucket is properly seated.
Power connection: Plug into grounded 120V AC outlet.
Drain option: Attach garden hose to drain port if using continuous drainage.

WARNING! Do not operate in temperatures below 41°F. Ensure unit is upright for 24 hours before first use if tilted during transport.

First-Time Setup

Power on dehumidifier; set initial preferences.

Set humidity level: Press HUMIDITY buttons to desired RH% (40-60% recommended).
Select fan speed: Choose HIGH or LOW via FAN button.
Set timer (optional): Use TIMER for auto on/off scheduling.
Check drain: If using bucket, ensure it's empty and locked in place.

CAUTION! Place away from walls and furniture to ensure proper air intake and exhaust.

Specifications

Model: FDL25P12
Capacity: 25 pints/day (AHAM verified)
Operating Conditions: 41°F to 95°F
Humidity Control: 35% to 85% RH (adjustable)
Fan Speeds: 2 (High/Low)
Water Bucket Capacity: 1.8 gallons
Power Requirements: 120V, 60Hz, 3.5A
Noise Level: ≤ 51 dB on low speed
Dimensions (HxWxD): 15.4" x 11.4" x 19.7"
Weight: 33 lbs

Controls and Settings

Control Panel: POWER, FAN SPEED, HUMIDITY (+/-), TIMER, FILTER ALERT reset.

Display: Current humidity, set point, fan icon, filter alert, bucket full indicator.

Humidity Setting: Adjust between 35% and 85% RH. Fan Speed: HIGH for maximum moisture removal, LOW for quiet operation. Timer: Program 1-24 hours for automatic start/stop. Filter Alert: LED illuminates when filter needs cleaning. Bucket Full: Auto-shutoff activates when bucket is full; "Bucket Full" indicator lights.

Connecting Drainage

Two drainage options: bucket collection or continuous drain.

Bucket: Empty when full indicator lights; remove, pour, replace securely.
Continuous drain: Attach standard garden hose (¾") to drain port; route to floor drain or sink.
Ensure hose is straight and downward-sloping to prevent water backup.

Tip: For continuous operation, use hose drainage to avoid frequent bucket emptying.

Operation Modes

Normal, Continuous, and Auto-Defrost modes.

Normal: Unit runs until set humidity is reached, then cycles off.
Continuous: Press and hold HUMIDITY for 3 sec to run continuously regardless of humidity.
Auto-Defrost: Automatically activates when coil temperature drops; compressor pauses, fan continues.
Timer: Set 1-24 hours for automatic start or stop delay.

WARNING! Do not block air intake or exhaust grilles. Operate only within specified temperature range.

Maintenance

Regular maintenance ensures optimal performance and longevity.

Clean filter every 2 weeks: Remove, wash with mild detergent, dry completely, reinstall.
Reset filter alert: Press and hold FILTER button for 3 seconds after cleaning.
Clean exterior: Wipe with damp cloth; do not use harsh chemicals.
End-of-season storage: Empty bucket, clean filter, coil, and housing; wrap cord; store upright in dry location.

Care & Cleaning

Unplug before cleaning. Use only soft, damp cloth; do not immerse in water.

CAUTION! Never use gasoline, solvents, or abrasive cleaners. Do not spray water into unit.

Regulatory Information

UL Listed. FCC Part 15 compliant. ENERGY STAR® certified. Manufactured for Frigidaire. For support, visit www.frigidaire.com or contact 1-800-374-4432. This product contains refrigerant R-410A.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not running	Power, bucket full, timer	Check plug; empty bucket; ensure timer not set.
Low moisture removal	Filter dirty, low temp, high fan	Clean filter; ensure room temp >41°F; use HIGH fan.
Noisy operation	Uneven floor, loose parts	Place on level surface; check for loose panels.
Bucket full light on (empty bucket)	Bucket misaligned, float stuck	Remove and reseat bucket; check float movement.
Error code "E1"	Sensor fault	Unplug for 10 minutes; restart. If persists, contact service.

Reset: Unplug for 10 minutes to reset control board.

Service: 1-800-374-4432; www.frigidaire.com