Frigidaire FDL25P Dehumidifier Manual

The Frigidaire FDL25P is a 25-pint capacity dehumidifier designed for residential use, featuring automatic humidity control, a continuous drain option, a full bucket alert with auto-shutoff, washable air filter, and energy-efficient operation. Ideal for medium-sized rooms up to 1500 sq ft. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Water Drainage Options 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control Panel, Water Bucket, Air Filter, Continuous Drain Hose Port, Handle, Casters.

Feature	Description
Humidity Control	Automatic humidity sensing with adjustable set point (35%-85%)
Water Bucket	Removable 25-pint capacity with full bucket alert and auto-shutoff
Continuous Drain	Hose connection for unattended operation
Air Filter	Washable mesh filter for improved air quality
Control Panel	Digital display with humidity readout and mode selection
Power Cord	6-foot cord with storage wrap
POWER	Turns dehumidifier on/off
MODE	Selects between Continuous, Auto, and Turbo modes
HUMIDITY SET	Adjusts target humidity level
FILTER ALERT	Indicator light for filter cleaning reminder

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

Choose location: Place in center of room, at least 12 inches from walls and furniture for proper airflow.
Check air vents: Ensure intake and exhaust vents are unobstructed.
Set up drainage: For bucket use, ensure bucket is properly seated. For continuous drain, attach hose to port and route to floor drain.
Plug into grounded 120V AC outlet.

WARNING! Do not place in areas below 41°F (5°C) to prevent coil freezing. Ensure unit is upright before operation.

First-Time Setup

Power on unit; follow initial setup steps.

Set humidity level: Press HUMIDITY SET to desired level (recommended 45-50% for comfort).
Select mode: Press MODE to choose Auto (recommended for most uses).
Check bucket: Ensure bucket is fully inserted and locked in place.
Monitor operation: Allow 24 hours to reach desired humidity level in room.

CAUTION! Do not operate without air filter installed. Handle bucket with care to avoid spills.

Specifications

Capacity: 25 pints per day (at 60°F, 60% RH).
Coverage Area: Up to 1500 square feet.
Operating Temperature: 41°F to 95°F (5°C to 35°C).
Water Bucket: 25-pint removable container with handle.
Power Requirements: 120V AC, 60Hz, 3.5 Amps.
Air Flow: 100 CFM (cubic feet per minute).
Noise Level: 51 dB on low setting.
Dimensions: 15.4" W x 9.8" D x 19.9" H.
Weight: 30.9 lbs.
Refrigerant: R-410A.

Controls and Settings

Access controls via front panel buttons and digital display.

Control Panel: POWER, MODE, HUMIDITY SET, FILTER RESET.

Display Indicators: Current humidity, Target humidity, Bucket full alert, Filter clean reminder, Mode indicator.

Modes: Continuous (runs constantly), Auto (cycles based on humidity setting), Turbo (maximum dehumidification). Settings: Humidity level adjustment (35%-85%), 24-hour timer (optional model), Filter alert reset.

Operation Modes

Three operating modes for different needs.

Auto Mode: Unit runs until target humidity is reached, then cycles on/off to maintain level.
Continuous Mode: Runs continuously regardless of humidity level (use for very damp areas).
Turbo Mode: Maximum moisture removal for fastest results; higher fan speed and noise.

Tip: Use Auto mode for energy efficiency. Switch to Continuous only when drying out a very wet space.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Air Filter: Clean every 2-4 weeks. Remove, wash with warm water and mild detergent, dry completely before reinstalling.
Water Bucket: Empty when full or every few days. Clean monthly with mild detergent to prevent mold/mildew.
Exterior: Wipe with damp cloth. Never use harsh chemicals or abrasives.
Coils: Vacuum dust from rear coils every 3 months for efficiency.

WARNING! Always unplug unit before cleaning. Never immerse in water.

Water Drainage Options

Two methods for water removal.

Bucket Method: Unit stops when bucket is full (indicator light). Remove bucket by handle, empty, replace.
Continuous Drain: Attach 5/8" ID hose (not included) to drain port. Route hose to floor drain or sump pump. Unit will run continuously without stopping.

Note: For continuous drain, ensure hose has downward slope without kinks.

Care & Storage

Proper storage extends unit life.

For seasonal storage: Empty and clean bucket. Run in Fan Only mode for 24 hours to dry internal components.
Clean filter and coils. Wrap cord around storage hooks.
Store upright in dry, covered area. Avoid extreme temperatures.

CAUTION! Never store with water in bucket. Always store in upright position.

Regulatory Information

UL Listed. FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Frigidaire; trademarks of Electrolux Home Products, Inc. Energy Star certified (if applicable). For support, visit www.frigidaire.com or contact 1-800-374-4432.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not turning on	Power source/switch	Check outlet; ensure unit is plugged in; press POWER button firmly.
Not removing moisture	Temperature/filter	Ensure room temp above 41°F; clean air filter; check humidity setting.
Bucket full light on	Bucket full/misaligned	Empty bucket; ensure properly seated and locked.
Water leaking	Bucket/drain hose	Check bucket for cracks; ensure drain hose connected securely without kinks.
Loud noise/vibration	Placement/leveling	Ensure unit on level surface; check for objects touching unit.
Filter light on	Dirty filter	Clean air filter; press and hold FILTER RESET for 3 seconds.

Reset: Unplug for 5 minutes, then restart. For persistent issues, contact service.

Service: 1-800-374-4432; www.frigidaire.com