Frigidaire FDK45P Dehumidifier Manual

The Frigidaire FDK45P is a high-capacity 45-pint dehumidifier designed for medium to large rooms, featuring automatic humidity control, continuous drain option, washable air filter, auto-restart after power interruption, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Control panel with digital display, water collection bucket, washable filter, continuous drain port, casters for mobility.

Installation

Unpack and inspect contents. Place on level surface.

1. Position unit: Place on flat, level surface away from walls and furniture for proper airflow.
2. Install filter: Remove filter from packaging and insert into filter compartment.
3. Check bucket: Ensure water collection bucket is properly seated and locked in place.
4. Power connection: Plug into dedicated 120V AC outlet.

WARNING! Do not place near heat sources or in direct sunlight. Ensure proper clearance (at least 12 inches) on all sides.

First-Time Setup

Power on dehumidifier; follow control panel prompts.

1. Set humidity level: Press HUMIDITY button to select desired level (35%-85%).
2. Select fan speed: Choose HIGH for maximum dehumidification or LOW for quiet operation.
3. Program timer: Use TIMER button to set automatic on/off schedule if desired.
4. Continuous drain setup: Connect garden hose to drain port if using continuous drainage.

CAUTION! Ensure unit is upright for at least 24 hours before first use if transported on its side.

Specifications

• Capacity: 45 pints per day (at 60°F, 60% RH).
• Coverage Area: Up to 1500 square feet.
• Operating Temperature: 41°F to 95°F.
• Water Bucket: 45-pint capacity with handle and full indicator.
• Power Requirements: 120V, 60Hz, 4.5 amps.
• Air Flow: 165 CFM on high speed.
• Noise Level: 52 dB on high setting.
• Dimensions: 15.4" W × 11.4" D × 24.3" H.
• Weight: 41.9 lbs.
• Certifications: Energy Star, UL listed.

Controls and Settings

Control Panel: POWER button, HUMIDITY setting, FAN speed, TIMER, FILTER reset indicator.

Display Indicators: Current humidity, set humidity, fan speed, timer status, filter alert, bucket full alert.

Humidity Control: Adjust between 35%-85% in 5% increments. Fan Settings: HIGH for maximum moisture removal, LOW for quiet operation. Timer: Programmable 24-hour on/off schedule. Filter Alert: Illuminates when filter needs cleaning. Auto-Defrost: Automatically activates in low temperatures to prevent coil freezing.

Connecting Drainage

Bucket collection: Standard operation with removable bucket. Continuous drain: Garden hose connection for unattended operation.

1. Turn off and unplug unit before connecting drain hose.
2. Remove drain plug from back of unit.
3. Connect standard 5/8" garden hose (not included).
4. Route hose to floor drain or suitable drainage area.
5. Ensure hose has downward slope without kinks.

Tip: For continuous drainage, bucket must remain in place even when not collecting water.

Operating Modes

Supports automatic humidity control, continuous operation, and timer scheduling.

1. Automatic Mode: Unit runs until set humidity is reached, then cycles on/off to maintain level.
2. Continuous Mode: Runs continuously regardless of humidity level (select "CONT" on humidity control).
3. Laundry Mode: Maximum dehumidification for drying clothes indoors.
4. Sleep Mode: Reduces fan speed and display brightness for nighttime operation.
5. Timer Operation: Set specific on/off times for energy savings.

WARNING! Do not operate below 41°F as coils may freeze. Auto-defrost function works above this temperature.

Maintenance

Regular maintenance ensures optimal performance and longevity.

1. Empty bucket: When full indicator lights or bucket is full.
2. Clean filter: Every 2-4 weeks depending on use; wash with warm water and mild detergent.
3. Clean exterior: Wipe with damp cloth; never use harsh chemicals.
4. End-of-season: Clean thoroughly, empty bucket, and store in dry location.

Note: Reset filter alert light after cleaning by pressing and holding FILTER button for 3 seconds.

Care & Cleaning

Unplug before cleaning. Clean bucket with mild detergent; rinse thoroughly.

CAUTION! Do not use abrasive cleaners, gasoline, or chemical solvents. Never immerse unit in water.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Frigidaire; trademarks of Electrolux Home Products, Inc. Energy Star certified for energy efficiency. For support, visit www.frigidaire.com or contact 1-800-374-4432.

Troubleshooting

Reset: Unplug for 5 minutes, then restart to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com