Frigidaire FDH30J Dehumidifier Manual

The Frigidaire FDH30J is a 30-pint capacity dehumidifier designed for medium-sized rooms up to 1500 sq. ft. It features an Energy Star certification, electronic controls with humidistat, automatic shut-off when tank is full, continuous drain option, washable air filter, and 24-hour timer. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic control panel, 30-pint water collection tank, washable filter, continuous drain hose port, casters for mobility, and humidity sensor.

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

1. Choose location: Place in center of room for best air circulation, away from walls and furniture.
2. Clearance: Maintain at least 12 inches of clearance on all sides.
3. Check filter: Ensure washable filter is properly installed.
4. Power connection: Plug into dedicated 120V AC outlet.
5. Drain setup: Attach hose for continuous drain or use collection tank.

WARNING! Do not place near heat sources or in areas with standing water. Ensure proper ventilation.

First-Time Setup

Power on unit; follow control panel prompts.

1. Set humidity level: Press HUMIDITY button to select desired level (45-50% recommended).
2. Select fan speed: Choose HIGH or LOW fan setting.
3. Set timer (optional): Program 24-hour on/off schedule.
4. Check drain: Ensure tank is empty and properly seated, or connect drain hose.
5. Run initial cycle: Allow unit to run for 24 hours to stabilize room humidity.

CAUTION! Handle water tank carefully; do not tilt unit with full tank.

Specifications

• Model: FDH30J
• Capacity: 30 pints per day (AHAM)
• Coverage: Up to 1500 sq. ft.
• Power: 115V, 60Hz, 3.5 Amps
• Energy Consumption: 300 Watts (approx.)
• Water Tank Capacity: 14 pints (removable)
• Operating Temperature: 41°F to 95°F
• Noise Level: 51 dB on low setting
• Dimensions: 15.4" W x 11.4" D x 19.7" H
• Weight: 33.5 lbs
• Refrigerant: R-410A

Controls and Settings

Access controls via electronic panel on top of unit.

Control Panel: POWER, HUMIDITY SET, FAN SPEED (HIGH/LOW), TIMER, FILTER RESET, TANK FULL indicator.

Humidity Control: Adjust from 35% to 85% in 5% increments. Fan Speed: HIGH for maximum moisture removal, LOW for quiet operation. Timer: Program on/off times in 1-hour increments up to 24 hours. Filter Alert: FILTER RESET light illuminates when cleaning is needed. Tank Full: Red light and auto shut-off when tank reaches capacity.

Operation Modes

Normal Mode: Set desired humidity level; unit runs until level is reached. Continuous Mode: Set humidity to lowest setting (35%) for constant operation. Timer Mode: Program specific operating times. Laundry Mode: HIGH fan speed for faster drying in laundry areas.

1. Press POWER to turn unit on.
2. Set humidity level using HUMIDITY buttons.
3. Select fan speed (HIGH/LOW).
4. For timer, press TIMER and set hours.
5. Unit will cycle on/off automatically to maintain set humidity.

Tip: Close windows and doors for most efficient operation.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Clean filter: Remove and wash every 2 weeks; press FILTER RESET after cleaning.
2. Empty tank: When FULL light illuminates, turn off, remove and empty tank.
3. Clean exterior: Wipe with damp cloth; do not use chemicals.
4. Clean coils: Use soft brush to remove dust every 3 months.
5. Check drain hose: Ensure continuous drain hose is clear of obstructions.

WARNING! Unplug unit before any maintenance. Do not use water above 104°F on filter.

Water Removal Options

Two methods for water removal: Collection tank or continuous drain.

Collection Tank: 14-pint capacity with handle and splash guard. When full, unit shuts off and FULL light illuminates. Empty tank and replace to resume operation.

Continuous Drain: Connect 5/8" ID hose to rear port. Place hose in floor drain or suitable outlet. Ensure hose has downward slope without kinks. Unit will drain continuously without need to empty tank.

Care & Storage

For seasonal storage or extended non-use:

1. Unplug unit and empty water tank completely.
2. Clean filter and let dry completely.
3. Run fan-only mode for 24 hours to dry internal components.
4. Clean exterior and coils.
5. Store in upright position in dry, covered area.
6. Cover unit to prevent dust accumulation.

CAUTION! Do not store with water in tank. Protect from freezing temperatures.

Regulatory Information

UL Listed: Meets UL standard 474. Energy Star: Certified for energy efficiency. FCC Part 15: Class B digital device; complies with interference limits. Refrigerant: Contains R-410A. For disposal, follow local regulations. Copyright © Frigidaire; trademarks of Electrolux Home Products, Inc. For support, visit www.frigidaire.com or contact 1-800-374-4432.

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-374-4432; www.frigidaire.com