Frigidaire FDD60J2 Dehumidifier Manual

The Frigidaire FDD60J2 is a high-capacity dehumidifier designed to remove up to 60 pints of moisture per day from the air in large spaces. It features electronic controls, a continuous drain option, an auto-restart function, a washable filter, a full-bucket alert with auto-shutoff, and a 24-hour timer. Ideal for basements, living areas, and other damp spaces up to 1500 sq. ft. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic control panel, Removable water bucket, Continuous drain hose port, Washable air filter, Carrying handles, Cord wrap.

Installation & Placement

Unpack and inspect contents. Place on a level, stable surface.

1. Choose Location: Place in the center of the room or area with high humidity, away from walls and furniture for proper airflow.
2. Check Clearance: Ensure at least 12 inches of clearance on all sides, especially the air intake and exhaust.
3. Prepare for Drainage: Decide to use the water bucket or connect the continuous drain hose (included).
4. Connect Power: Plug into a dedicated 115V AC, 60Hz outlet. Do not use an extension cord.

WARNING! Do not operate in temperatures below 41°F (5°C). Ensure the unit is upright for at least 24 hours before first use if transported on its side.

First-Time Setup

Plug in the unit; the control panel will illuminate.

1. Set Humidity Level: Press the HUMIDITY SET button to select desired relative humidity (35% to 85%).
2. Select Fan Speed: Press the FAN button to choose between HIGH (faster dehumidification) or LOW (quieter operation).
3. Set Timer (Optional): Press the TIMER button to program automatic start or stop times.
4. Check Filter: Ensure the washable filter is clean and properly installed.
5. Choose Drain Method: Insert the bucket or connect the drain hose to the port at the back.

CAUTION! Always turn off and unplug the unit before removing the water bucket or performing any maintenance.

Specifications

• Model: FDD60J2
• Dehumidification Capacity: 60 Pints per Day (at 80°F, 60% RH)
• Recommended Area: Up to 1500 sq. ft.
• Power Source: 115V AC, 60Hz, 6.5 Amps
• Water Bucket Capacity: 16 Pints (Removable with Handle)
• Continuous Drain: 5/8" Inner Diameter Hose (included)
• Operating Temperature: 41°F to 95°F (5°C to 35°C)
• Controls: Electronic with Digital Display
• Filter: Washable Antimicrobial Air Filter
• Certifications: ETL Listed

Controls and Settings

Access all functions via the front electronic control panel.

Control Panel: POWER, HUMIDITY SET (+/-), FAN (High/Low), TIMER (1-24 hrs), FILTER CHECK indicator, BUCKET FULL indicator.

Humidity Control: Set target humidity from 35% to 85%. The unit will cycle on/off to maintain this level. Fan Speed: HIGH for maximum moisture removal, LOW for quiet nighttime operation. Timer: Set to turn the unit ON or OFF after 1 to 24 hours. Indicators: FILTER CHECK light illuminates when the filter needs cleaning. BUCKET FULL light and alarm activate when the water bucket is full and needs emptying.

Operation Modes

Standard, Continuous, and Timer modes.

1. Standard Mode: Unit runs until desired humidity is reached, then cycles off. It will restart if humidity rises.
2. Continuous Mode: Press and hold the HUMIDITY SET button for 3 seconds. Unit runs continuously regardless of humidity level until manually turned off or the bucket is full.
3. Timer Mode: Use the TIMER button to program automatic operation. Useful for running the unit during specific hours of the day.

Tip: For fastest drying, close all windows and doors in the room. Use CONTINUOUS mode initially in very damp conditions.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Empty Water Bucket: When full, the unit will shut off. Pull the bucket straight out, empty it, and slide it back in until it clicks.
2. Clean Air Filter: Every 2-4 weeks, remove the filter, rinse with warm water, and let it air dry completely before reinstalling.
3. Clean Exterior: Unplug unit. Wipe the cabinet with a soft, damp cloth. Do not use harsh chemicals or abrasives.
4. Clean Water Bucket: Periodically wash the bucket with mild soap and water to prevent mold or mildew.
5. End-of-Season Care: See Storage section.

WARNING! Never operate the unit without the filter or with a wet filter installed. Always unplug before cleaning.

Storage & Winterization

If not using the dehumidifier for an extended period (e.g., winter):

1. Unplug the unit.
2. Empty and thoroughly dry the water bucket.
3. Clean the air filter and let it dry.
4. Run the unit in FAN-only mode (if available) for 30 minutes in a warm room to dry the internal coils.
5. Coil the power cord and secure it with the cord wrap.
6. Store the unit upright in a cool, dry place. Cover it to prevent dust accumulation.

CAUTION! Do not store the unit in a location where temperatures may fall below freezing.

Regulatory Information

This appliance is ETL listed to U.S. safety standards. Disposal: This product contains refrigerants. At end of life, dispose of in accordance with federal and local regulations—do not dispose of in household trash. For recycling information, contact your local waste authority. Copyright © Frigidaire. Frigidaire is a trademark of AB Electrolux. For support, visit www.frigidaire.com or contact 1-800-374-4432.

Troubleshooting

Reset: Unplug the unit for 5 minutes to reset the electronic controls.

Service: 1-800-374-4432; www.frigidaire.com