Frigidaire FDB70R1ENG12 Dehumidifier Manual

The Frigidaire FDB70R1ENG12 is a 70-pint dehumidifier designed for residential use, featuring automatic humidity control, continuous drainage capability, washable air filter, digital humidistat, full bucket alert with auto-shutoff, turbo mode for faster moisture removal, and energy-efficient operation. Suitable for areas up to 4500 sq ft. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drainage 7. Operation Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, 70-pint water collection bucket, washable air filter, continuous drainage port, humidistat, turbo mode button, filter check indicator.

Feature	Description
Digital humidistat	Automatically maintains desired humidity level (30-90% RH)
70-pint capacity	Removes up to 70 pints per day at 80°F/60% RH
Continuous drainage	Garden hose connection for automatic water removal
Washable air filter	Captures airborne particles; reusable after cleaning
Full bucket alert	Indicator light and auto-shutoff when bucket is full
Turbo mode	Maximum moisture removal for high humidity conditions
Filter check indicator	LED light alerts when filter needs cleaning
Auto restart	Resumes previous settings after power interruption
Energy efficient	ENERGY STAR certified for reduced power consumption
Portable design	Built-in handles and caster wheels for easy mobility

Installation

Unpack and inspect contents. Place on level surface in area requiring dehumidification.

Position unit: Allow at least 12-18 inches clearance on all sides for proper airflow.
Check filter: Ensure washable filter is properly installed before operation.
Set up drainage: For continuous drainage, connect standard garden hose to drain port.
Plug into grounded outlet: Use dedicated 115V AC, 60Hz outlet.

WARNING! Do not operate in temperatures below 41°F (5°C). Ensure unit is upright for at least 24 hours before first use if transported on its side.

First-Time Setup

Power on dehumidifier; configure initial settings.

Select humidity level: Press HUMIDITY button to set desired RH percentage (45-50% recommended).
Choose mode: Select NORMAL for standard operation or TURBO for faster dehumidification.
Set timer: Use TIMER button to program automatic on/off cycles if desired.
Check bucket: Ensure collection bucket is properly seated and empty.

CAUTION! Do not place near heat sources or in direct sunlight. Keep away from flammable materials.

Specifications

Model: FDB70R1ENG12
Capacity: 70 pints per day (at 80°F/60% RH)
Coverage Area: Up to 4500 square feet
Humidity Control: 30-90% RH adjustable
Water Removal: 2.9 liters per hour at standard conditions
Bucket Capacity: 16.9 pints (2 gallons)
Air Flow: 188 CFM at high speed
Power Requirements: 115V AC, 60Hz, 6.5A
Energy Consumption: 590 watts (ENERGY STAR certified)
Operating Temperature: 41°F to 95°F (5°C to 35°C)
Dimensions: 15.4" W × 11.4" D × 24.3" H
Weight: 41.9 lbs

Controls and Settings

Digital control panel with LED display and touch buttons.

Control Panel: POWER, HUMIDITY (+/-), MODE (Normal/Turbo), TIMER, FILTER CHECK indicator, FULL BUCKET indicator.

Humidity Settings: Adjust between 30-90% RH in 5% increments. Mode Selection: NORMAL for quiet operation, TURBO for maximum moisture removal. Timer Function: Program 1-24 hours for automatic on/off. Filter Alert: LED illuminates when filter needs cleaning. Bucket Full: Red light indicates full bucket; unit auto-shuts off.

Connecting Drainage

Continuous drainage option eliminates manual bucket emptying.

Turn off and unplug unit before connecting hose.
Remove drain plug from back of unit.
Connect standard 5/8" garden hose (not included) to drain port.
Route hose to floor drain, sink, or outdoors with downward slope.
Replace bucket to engage continuous drainage mode.

Tip: Ensure hose has no kinks or bends that could restrict water flow.

Operation Modes

Multiple operating modes for different humidity conditions.

Normal Mode: Standard dehumidification with quiet operation.
Turbo Mode: Maximum airflow and moisture removal for high humidity.
Auto Mode: Unit automatically switches between Normal and Turbo based on humidity level.
Continuous Mode: Runs continuously regardless of humidity setting (for very damp areas).
Timer Mode: Program unit to turn on/off at specific times (1-24 hour settings).

WARNING! Do not operate in enclosed spaces without proper ventilation. Allow air circulation around unit.

Maintenance

Regular maintenance ensures optimal performance and longevity.

Maintenance Task	Frequency	Procedure
Empty water bucket	As needed (when full light illuminates)	Remove, empty, and replace bucket securely
Clean air filter	Every 2-4 weeks	Remove, wash with warm water, dry completely
Clean exterior	Monthly	Wipe with damp cloth, dry thoroughly
Check drain hose	Monthly	Ensure no clogs or kinks in continuous drainage
Professional service	Annually	Have certified technician inspect internal components

Care & Cleaning

Unplug before cleaning. Use mild detergent and soft cloth only.

Exterior: Wipe with damp cloth; avoid abrasive cleaners.
Air filter: Remove, wash under running water, air dry completely before reinstalling.
Water bucket: Empty regularly, clean with mild detergent monthly.
Coils: Use soft brush to remove dust from rear coils (do not use water).

CAUTION! Never immerse unit in water. Do not use harsh chemicals or solvents.

Regulatory Information

UL Listed for safety. EPA ENERGY STAR certified. Complies with FCC Part 15 for electromagnetic interference. Manufactured to meet applicable ANSI/AHAM standards. For support, visit www.frigidaire.com or contact 1-800-374-4432. This product contains refrigerant that must be recovered by certified technicians.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not turning on	Power issue	Check outlet; ensure plug is secure; test outlet with another device
Not removing moisture	Temperature too low	Operate only above 41°F; check room temperature
Bucket full light on	Bucket full or not seated	Empty bucket; ensure proper placement
Filter light illuminated	Dirty filter	Clean air filter as per instructions
Loud noise during operation	Uneven surface or obstruction	Place on level floor; check for objects near fan
Ice on coils	Low temperature or dirty filter	Raise room temperature; clean filter; turn off to defrost
Water leakage	Improper drainage connection	Check hose connections; ensure bucket is properly seated
Error codes on display	Sensor or system fault	Unplug for 10 minutes, then restart; if persists, call service

Reset: Unplug unit for 10 minutes to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com