Frigidaire FDB30R Dehumidifier Manual

The Frigidaire FDB30R is a 30-pint capacity dehumidifier designed for medium-sized rooms up to 500 sq. ft. It features an automatic humidistat, continuous drain option, auto-restart after power interruption, washable air filter, full bucket alert with auto shut-off, and low-temperature operation capability. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation 7. Maintenance 8. Care & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control panel with digital humidistat, water collection bucket, washable air filter, continuous drain hose connection, casters for mobility.

Feature	Description
Capacity	30 pints per day (at 80°F, 60% RH)
Coverage Area	Up to 500 square feet
Humidistat	Electronic with digital display; adjustable from 35% to 85% RH
Auto Shut-Off	Activates when bucket is full
Continuous Drain	Optional hose connection for unattended operation
Air Filter	Washable, removable filter
Auto-Restart	Resumes previous settings after power outage
Low Temp Operation	Operates down to 41°F (5°C)
Bucket Full Indicator	LED light alerts when bucket needs emptying
Power Cord	6-foot cord with storage wrap

Installation

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place unit at least 6 inches from walls and furniture for proper airflow.
Bucket Installation: Ensure bucket is properly seated and locked into place.
Continuous Drain (Optional): Attach 5/8" ID hose to drain outlet; route to floor drain or sink.
Power Connection: Plug into dedicated 115V AC, 60Hz outlet. Do not use extension cord.

WARNING! Ensure unit is upright for at least 24 hours before first use if transported on its side. Keep away from heat sources and direct sunlight.

First-Time Setup

Plug in unit; control panel will illuminate.

Set Desired Humidity: Press HUMIDITY button to set target relative humidity (35%-85%).
Select Fan Speed: Choose HIGH or LOW fan setting for desired airflow.
Enable Continuous Operation: Press CONTINUOUS button for maximum moisture removal.
Check Filter: Ensure air filter is clean and properly installed.

CAUTION! Do not operate without bucket properly installed. Keep unit level to prevent water leakage.

Specifications

Model: FDB30R
Dehumidification Capacity: 30 pints/day (at 80°F, 60% RH)
Recommended Room Size: Up to 500 sq. ft.
Power Requirements: 115V AC, 60Hz, 3.5A
Water Bucket Capacity: 1.8 gallons (6.8 liters)
Operating Temperature Range: 41°F to 90°F (5°C to 32°C)
Air Flow: 165 CFM at high speed
Refrigerant: R-410A
Dimensions (HxWxD): 15.4" x 11.0" x 19.7"
Weight: 33 lbs

Controls and Settings

Control Panel: POWER button, HUMIDITY adjustment, FAN speed (HIGH/LOW), CONTINUOUS mode, FILTER indicator, BUCKET FULL indicator.

Operation Modes: Normal (humidistat controlled), Continuous (runs constantly), Laundry (accelerated drying).

Humidity Control: Set desired humidity level (35%-85%). Unit cycles on/off automatically to maintain setting. Fan Speed: HIGH for maximum moisture removal, LOW for quiet operation. Filter Alert: FILTER light illuminates when air filter needs cleaning (approximately every 250 hours).

Operation

For optimal performance, keep doors and windows closed.

Power On: Press POWER button; unit will begin operating.
Set Humidity: Use HUMIDITY buttons to set desired level.
Monitor Operation: Check bucket periodically or use continuous drain.
Bucket Emptying: When BUCKET FULL light illuminates, turn off unit, remove bucket, empty, and replace.
Continuous Drain Setup: Connect hose before operation for unattended use.

Tip: For laundry drying, place unit in room with wet laundry and select CONTINUOUS mode.

Maintenance

Regular maintenance ensures optimal performance and longevity.

Air Filter Cleaning: Clean every 2-4 weeks or when FILTER light illuminates. Remove, wash with mild detergent, rinse, dry completely, and reinstall.
Bucket Cleaning: Empty and clean bucket monthly with mild detergent to prevent mold/mildew.
Exterior Cleaning: Wipe cabinet with damp cloth; never use harsh chemicals.
Off-Season Storage: Empty bucket completely, clean unit, wrap cord, and store upright in dry location.

WARNING! Always unplug unit before performing any maintenance. Do not immerse in water.

Care & Cleaning

Unplug before cleaning. Use only mild soap and water; never use abrasive cleaners, solvents, or harsh chemicals.

CAUTION! Do not spray water directly on unit. Ensure all parts are completely dry before reassembly and operation.

Regulatory Information

UL Listed. Meets U.S. safety standards. EPA Energy Star certified. This product contains refrigerant that must be recovered by certified technicians. For disposal, consult local regulations. Copyright © Frigidaire. For support, visit www.frigidaire.com or contact 1-800-374-4432.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not operating	No power/bucket full	Check power outlet; ensure bucket is properly installed and not full.
Poor dehumidification	Room too cold/dirty filter	Ensure room temperature above 41°F; clean air filter.
Water leakage	Bucket not seated/unit not level	Ensure bucket properly locked; check unit is level.
Loud operation	Dirty filter/unit on uneven surface	Clean air filter; place on level surface.
FILTER light on	Dirty air filter	Remove and clean air filter; reset by pressing FILTER button.
Frost on coils	Low temperature operation	Normal in cool conditions; unit will auto-defrost.

Reset: Unplug for 10 seconds, then reconnect to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com