Frigidaire FAD704TDD2 Dehumidifier Manual

The Frigidaire FAD704TDD2 is a high-capacity 70-pint dehumidifier designed for residential use, featuring an Energy Star certification, electronic controls with humidistat, continuous drain option, auto-restart, washable filter, and low-temperature operation capability. It effectively removes moisture from areas up to 4500 sq ft. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operating Instructions 7. Maintenance & Cleaning 8. Storage Instructions 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Electronic control panel with digital display, 2.1-gallon bucket with full-bucket alert, washable air filter, continuous drain hose connection, caster wheels for mobility, and Energy Star certification.

Feature	Description
Dehumidification Capacity	70 pints per day (at 80°F, 60% RH)
Electronic Controls	Digital humidistat and timer settings
Continuous Drain Option	Garden hose connection for unattended operation
Auto-Restart	Resumes previous settings after power interruption
Washable Filter	Removable filter for easy cleaning
Low-Temperature Operation	Functions effectively in cool temperatures
Full-Bucket Alert	Indicator light and auto shut-off when bucket is full
Caster Wheels	Easy mobility between rooms
Energy Star Certified	Energy efficient operation
Power Cord	6-foot cord with plug

Installation

Unpack and inspect contents. Place on level, stable surface.

Position the unit: Allow at least 12-18 inches of clearance on all sides for proper airflow.
Install the filter: Ensure washable filter is properly seated in the front grille.
Set up continuous drain (optional): Attach standard garden hose to drain outlet at back of unit.
Plug into grounded 115V AC power outlet.

WARNING! Do not use extension cords. Ensure the unit is on a level surface to prevent water leakage.

First-Time Setup

Plug in the dehumidifier; the control panel will illuminate.

Select operating mode: Press MODE button to choose between Continuous, Auto, or Manual operation.
Set desired humidity level: Use the UP/DOWN buttons to set humidistat between 35% and 85% relative humidity.
Set timer (optional): Use TIMER button to program on/off cycles.
Check bucket: Ensure bucket is properly inserted and empty before operation.

CAUTION! Always handle the unit with dry hands. Do not operate with damaged power cord.

Specifications

Model: FAD704TDD2
Dehumidification Capacity: 70 pints per day (at 80°F, 60% RH)
Recommended Room Size: Up to 4500 square feet
Water Tank Capacity: 2.1 gallons
Power Requirements: 115V, 60Hz, 7.5A
Air Flow: 265 CFM
Operating Temperature: 41°F to 95°F
Noise Level: 51 dB
Dimensions: 15.4" W x 11.4" D x 24.3" H
Weight: 46.3 lbs
Certifications: Energy Star, ETL Listed

Controls and Settings

Control Panel: POWER button, MODE selector, HUMIDISTAT adjustment, TIMER settings, FILTER indicator, FULL BUCKET indicator.

Modes: CONTINUOUS (runs constantly), AUTO (maintains set humidity level), MANUAL (user-controlled operation).

Humidistat: Adjustable from 35% to 85% RH. Timer: Programmable from 1 to 24 hours. Filter Alert: Illuminates when filter needs cleaning. Full Bucket Alert: Flashing light and auto shut-off when bucket is full.

Operating Instructions

For optimal performance, keep doors and windows closed in the room being dehumidified.

Power on: Press POWER button.
Select mode: Choose CONTINUOUS for maximum moisture removal, AUTO for maintaining specific humidity level, or MANUAL for custom operation.
Set humidity level: Use UP/DOWN buttons to set desired RH percentage.
Monitor operation: Check digital display for current room humidity and settings.
Empty bucket: When FULL indicator lights, turn off unit, remove and empty bucket, then replace securely.
Use continuous drain: For unattended operation, connect hose to drain outlet and place other end in floor drain or suitable container.

Tip: For fastest moisture removal, set to CONTINUOUS mode and lowest humidity setting.

Maintenance & Cleaning

Unplug unit before performing any maintenance.

Clean air filter: Remove filter every 2 weeks or when FILTER indicator lights. Wash with warm water and mild detergent, rinse thoroughly, and air dry completely before reinstalling.
Clean water bucket: Empty and clean bucket monthly with mild detergent to prevent mold and mildew.
Clean exterior: Wipe cabinet with soft, damp cloth. Do not use abrasive cleaners.
Check drain hose: If using continuous drain, ensure hose is clear of obstructions.
End-of-season cleaning: Before storage, run unit in fan-only mode for several hours to dry internal components.

WARNING! Never operate without filter installed. Do not immerse unit in water.

Storage Instructions

When not in use for extended periods:

Unplug the unit from power outlet.
Empty and thoroughly clean water bucket.
Clean air filter and ensure it's completely dry.
Coil power cord neatly and secure with twist tie.
Store in upright position in dry, protected area.
Cover unit to prevent dust accumulation.

CAUTION! Store in area where temperature remains above freezing to prevent damage to internal components.

Regulatory Information

This appliance complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © Frigidaire. Frigidaire is a trademark of AB Electrolux. For support, visit www.frigidaire.com or contact customer service at 1-800-374-4432.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not running	No power/bucket full	Check power connection; ensure bucket is empty and properly inserted.
Poor dehumidification	Dirty filter/extreme conditions	Clean filter; ensure room temperature is within operating range (41°F-95°F).
Water leakage	Unit not level/bucket not seated	Place on level surface; ensure bucket is properly inserted and drain hose connected securely.
Loud noise	Loose parts/obstruction	Check for loose panels; ensure nothing is touching fan blades; unit may be noisy during compressor start-up (normal).
Frost on coils	Low temperature	Normal in low temperatures; unit will auto-defrost. If persistent, raise room temperature above 65°F.
FILTER light on	Dirty air filter	Clean washable filter as described in maintenance section.

Reset: Unplug unit for 5 minutes, then plug back in to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com