Frigidaire FAD704TDB7 Dehumidifier Manual

The Frigidaire FAD704TDB7 is a 70-pint dehumidifier designed for medium to large rooms, featuring automatic humidity control, continuous drainage option, electronic controls with digital display, auto-restart after power interruption, washable filter, full bucket alert with auto shut-off, and turbo mode for faster moisture removal. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drainage 7. Operation Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, water collection bucket, continuous drain port, washable air filter, casters for mobility, and humidity sensor.

Feature	Description
Electronic Controls	Digital display with humidity readout and timer
70-Pint Capacity	Removes up to 70 pints per day at AHAM conditions
Continuous Drain Option	Garden hose connection for unattended operation
Auto Humidity Control	Set desired humidity level (35%-85%)
Full Bucket Alert	Indicator light and auto shut-off when bucket is full
Washable Filter	Removable filter for easy cleaning
Turbo Mode	Maximum moisture removal speed
Auto-Restart	Resumes previous settings after power outage
24-Hour Timer	Program on/off cycles
Casters	Four wheels for easy room-to-room movement

Installation

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place at least 12 inches from walls and furniture for proper airflow.
Bucket installation: Ensure water collection bucket is properly seated.
Continuous drainage: Connect standard garden hose to drain port (optional).
Power connection: Plug into dedicated 115V AC outlet.

WARNING! Do not use extension cords. Ensure unit is upright before operation.

First-Time Setup

Plug in unit; control panel will illuminate.

Set humidity level: Press HUMIDITY button to select desired level (45% recommended).
Choose mode: Select NORMAL or TURBO mode based on moisture conditions.
Set timer: Press TIMER to program automatic shut-off if desired.
Check filter: Ensure washable filter is clean and properly installed.

CAUTION! Allow unit to stand upright for 24 hours if transported on its side.

Specifications

Capacity: 70 pints per day (at 60°F, 60% RH).
Coverage Area: Up to 4,500 sq ft (depending on conditions).
Humidity Control: 35% to 85% adjustable.
Power Requirements: 115V, 60Hz, 7.5A.
Water Removal: 2.9 liters/hour at standard conditions.
Noise Level: 51 dB on normal mode.
Bucket Capacity: 16.9 pints (2 gallons).
Dimensions: 15.4" W x 11.4" D x 23.6" H.
Weight: 41.9 lbs.
Refrigerant: R410A.

Controls and Settings

Control Panel: POWER, MODE (Normal/Turbo), HUMIDITY, TIMER, FILTER RESET.

Display Indicators: Current humidity, set humidity, timer, full bucket, filter alert, turbo mode.

Humidity Setting: Adjust between 35%-85% in 5% increments. Timer: Program 1-24 hours for automatic shut-off. Mode Selection: NORMAL for quiet operation, TURBO for maximum dehumidification. Filter Alert: LED illuminates when filter needs cleaning (reset with FILTER button).

Connecting Drainage

Continuous drainage option for unattended operation.

Turn off and unplug unit.
Remove bucket and locate drain port on back.
Connect standard 5/8" garden hose (not included).
Route hose to floor drain or suitable drainage area.
Replace bucket (unit will operate without bucket when hose connected).

Tip: Ensure hose has downward slope without kinks for proper drainage.

Operation Modes

Two operating modes for different conditions.

Normal Mode: Standard operation with balanced noise and efficiency.
Turbo Mode: Maximum airflow and dehumidification for very damp conditions.
Auto Mode: Unit automatically adjusts fan speed based on humidity level.
Continuous Operation: Runs until bucket is full or humidity set point reached.
Timer Operation: Set 1-24 hour shut-off for energy savings.

WARNING! Do not operate below 41°F. Frost may form on coils in low temperatures.

Maintenance

Regular maintenance ensures optimal performance.

Empty bucket: When full bucket light illuminates, remove and empty water.
Clean filter: Remove and wash every 2 weeks or when filter light appears.
Clean exterior: Wipe with damp cloth when unit is unplugged.
End-of-season: Empty bucket, clean filter, and store in dry location.

Care & Cleaning

Unplug before cleaning. Use mild detergent and soft cloth only.

CAUTION! Never immerse unit in water. Do not use harsh chemicals or abrasives.

Regulatory Information

UL Listed. Energy Star certified. Meets EPA refrigerant standards. Manufactured for Electrolux Home Products. For support, visit www.frigidaire.com or contact 1-800-374-4432. One-year limited warranty on parts and labor.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not running	Power/Bucket	Check power connection; ensure bucket is properly seated.
Low moisture removal	Filter/Room conditions	Clean filter; ensure room temp above 41°F; close windows/doors.
Water leakage	Bucket/Hose connection	Ensure bucket properly inserted; check hose for kinks/leaks.
Loud noise	Uneven surface/Obstruction	Place on level floor; check for objects near fan.
Display not working	Power/Control lock	Check outlet; press and hold POWER for 5 seconds to reset.
Frost on coils	Low temperature	Turn off unit; allow to thaw; increase room temperature.

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com