Frigidaire FAD704DWDE1 Dehumidifier Manual

The Frigidaire FAD704DWDE1 is a 70-pint capacity dehumidifier designed for residential use, featuring electronic controls, automatic humidity sensing, continuous drain capability, washable air filter, auto-restart function, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Drainage Options 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, 70-pint moisture removal capacity, washable filter, built-in humidistat, continuous drain hose connection, full bucket alert, auto-defrost function.

Feature	Description
Capacity	70 pints per day (at 60°F, 90% RH)
Control Panel	Electronic touch controls with LED display
Humidistat	Automatic humidity sensing and control
Filter	Washable air filter for improved air quality
Drain Options	Built-in bucket with handle and continuous drain hose connection
Auto Restart	Resumes previous settings after power interruption
Auto Defrost	Prevents coil freezing in low temperatures
Full Bucket Alert	Indicator light and automatic shut-off when bucket is full
Timer Function	24-hour programmable timer
Fan Speeds	Two-speed fan control (High/Low)

Installation & Placement

Unpack and inspect contents. Choose appropriate location for optimal performance.

Remove all packaging materials and tape from unit.
Place on level, firm surface in area requiring dehumidification.
Ensure at least 12-18 inches of clearance on all sides for proper airflow.
Position away from walls, furniture, and curtains that may block air vents.
Place in center of room for best overall moisture removal.

WARNING! Do not install in areas with temperatures below 41°F (5°C) or above 95°F (35°C). Keep away from heat sources and direct sunlight.

First-Time Setup

Plug into dedicated 115V outlet; follow initial setup procedure.

Insert water collection bucket securely into unit until it clicks into place.
Plug power cord into grounded 115V electrical outlet.
Press POWER button to turn unit on.
Set desired humidity level using UP/DOWN buttons (recommended: 45-50% RH).
Select fan speed (HIGH for maximum moisture removal, LOW for quiet operation).
For continuous drainage: Connect hose to drain port before operation.

CAUTION! Ensure bucket is properly installed before operation. Do not operate without filter in place.

Specifications

Model: FAD704DWDE1
Capacity: 70 pints per day (at 60°F/90% RH)
Coverage Area: Up to 4,500 square feet (in moderate conditions)
Power Requirements: 115V, 60Hz, 7.5A
Water Tank Capacity: 16.9 pints (2.1 gallons)
Air Flow: 206 CFM (High speed)
Operating Conditions: 41°F to 95°F (5°C to 35°C)
Noise Level: 51 dB (Low speed)
Dimensions: 15.4" W × 11.4" D × 24.3" H
Weight: 43.7 lbs
Refrigerant: R-410A

Controls and Settings

Electronic control panel with LED display and touch controls.

Control Panel Features: POWER button, HUMIDITY SET buttons (UP/DOWN), FAN SPEED button, TIMER button, FILTER ALERT indicator, FULL BUCKET indicator, DEFROST indicator.

Humidity Control: Adjustable from 35% to 85% RH in 5% increments. Fan Speed: HIGH (maximum dehumidification) or LOW (quiet operation). Timer: Programmable 24-hour ON/OFF timer. Filter Alert: LED indicator when filter needs cleaning. Auto Defrost: Automatically activates when coil temperature drops below 41°F.

Operation Modes

Multiple operating modes for different needs.

Continuous Mode: Runs continuously until turned off or bucket is full.
Auto Mode: Maintains set humidity level by cycling on/off automatically.
Turbo Mode: High fan speed for maximum moisture removal.
Quiet Mode: Low fan speed for nighttime or quiet operation.
Timer Mode: Set unit to turn on/off at specific times.

Tip: Use Auto Mode for energy-efficient operation. Set humidity to 45-50% for most residential applications.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Filter Cleaning: Clean washable filter every 2-4 weeks depending on use.
- Remove filter from front grille
- Rinse with warm water and mild detergent
- Allow to air dry completely before reinstalling
Bucket Cleaning: Empty and clean bucket regularly to prevent mold/mildew.
- Use mild detergent and warm water
- Rinse thoroughly
- Dry completely before reinstalling
Exterior Cleaning: Wipe cabinet with soft, damp cloth. Do not use abrasive cleaners.
Coil Cleaning: Vacuum condenser coils annually to maintain efficiency.
End-of-Season Storage: Empty bucket, clean unit, and store in dry location.

CAUTION! Always unplug unit before cleaning. Never immerse unit in water.

Drainage Options

Two methods for water removal: bucket collection or continuous drainage.

Bucket Collection:
- Unit automatically shuts off when bucket is full
- FULL BUCKET indicator light illuminates
- Remove bucket by lifting handle and pulling straight out
- Empty water and replace bucket securely
Continuous Drainage:
- Remove bucket from unit
- Connect 5/8" ID garden hose to drain port (hose not included)
- Route hose to floor drain, sink, or sump pump
- Ensure hose has downward slope without kinks
- Unit will drain continuously without needing bucket emptying

Note: For continuous drainage, unit must be level and hose must be properly installed.

Safety Features

Built-in safety mechanisms for protection.

Full Bucket Shut-off: Automatically stops operation when bucket is full
Auto Defrost: Prevents coil freezing in low temperatures
Tip-over Protection: Safety switch stops operation if unit is tipped over
Overload Protection: Protects compressor from electrical overload
Child Lock: Prevents accidental button presses (if equipped)
Auto Restart: Resumes previous settings after power restoration

WARNING! Never operate unit without bucket properly installed (unless using continuous drain).

Regulatory Information

UL Listed for safety. EPA Energy Star certified for energy efficiency. Manufactured to comply with applicable safety standards. Copyright © Frigidaire. For support, visit www.frigidaire.com or contact 1-800-374-4432. This product contains refrigerant that must be recovered by certified technicians.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not running	No power, full bucket, set humidity too high	Check power connection; empty bucket; lower humidity setting
Little or no water collection	Low humidity, low temperature, dirty filter	Check room humidity; ensure temp above 41°F; clean filter
Unit cycles on/off frequently	Room at set humidity, auto defrost active	Normal operation if humidity is controlled; wait for defrost cycle to complete
Water leaking from unit	Bucket not installed properly, drain hose issue	Reinstall bucket securely; check hose connections
Unusual noise	Loose parts, debris in fan, unit not level	Check for loose panels; clean fan area; ensure unit is level
Frost on coils	Low room temperature	Auto defrost should activate; move to warmer area if below 41°F
Filter light on	Dirty air filter	Clean washable filter as instructed
Musty odor	Dirty bucket or filter	Clean bucket and filter thoroughly

Reset: Unplug unit for 5 minutes, then restart. Check circuit breaker if no power.

Service: 1-800-374-4432; www.frigidaire.com. For refrigerant issues, contact certified technician only.