Frigidaire FAD704DWDE0 Dehumidifier Manual

The Frigidaire FAD704DWDE0 is a 70-pint dehumidifier designed for residential use, featuring automatic humidity control, continuous drainage option, washable air filter, electronic controls with digital display, 24-hour timer, auto-restart function, and energy-efficient operation. Suitable for areas up to 4500 square feet. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drainage 7. Operation Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, Digital humidity display, Washable air filter, Bucket-full indicator light, Continuous drainage port, 24-hour timer, Auto-defrost function.

Feature	Description
Capacity	70 pints per day (at 60°F, 90% RH)
Humidity Control	Automatic with adjustable set point (35%-85%)
Digital Display	Shows current humidity and settings
Continuous Drainage	Garden hose connection for unattended operation
Air Filter	Washable, removable filter
Bucket Full Alert	Indicator light and auto-shutoff
Timer	24-hour programmable on/off timer
Auto-Restart	Resumes previous settings after power interruption
Auto-Defrost	Prevents coil freezing in low temperatures
Power Cord	6-foot grounded cord

Installation

Unpack and inspect contents. Place on level surface.

Choose location: Place in center of room, at least 12 inches from walls/furniture.
Check airflow: Ensure air intake and exhaust are unobstructed.
Position drain hose: For continuous drainage, attach hose to port and route to floor drain.
Plug into grounded 115V AC outlet.

WARNING! Do not use extension cords. Ensure unit is upright before operation.

First-Time Setup

Plug in unit; control panel will illuminate.

Set humidity level: Press HUMIDITY button to select desired level (recommended 45-50%).
Select fan speed: Choose HIGH or LOW with FAN button.
Set timer (optional): Use TIMER button to program on/off cycles.
Check filter: Ensure washable filter is clean and properly installed.

CAUTION! Allow unit to stand upright for 24 hours if transported on its side.

Specifications

Model: FAD704DWDE0
Dehumidification Capacity: 70 pints/day (at 60°F, 90% RH)
Coverage Area: Up to 4500 square feet
Water Tank Capacity: 16.9 pints (removable bucket)
Operating Temperature: 41°F to 95°F
Fan Speeds: 2 (High/Low)
Power Requirements: 115V, 60Hz, 7.5A
Dimensions: 15.4" W x 11.0" D x 24.3" H
Weight: 46.3 lbs
Refrigerant: R-410A

Controls and Settings

Control Panel: POWER, HUMIDITY SET, FAN SPEED, TIMER, FILTER RESET.

Display Indicators: Current humidity, Set point, Bucket full, Filter clean, Timer active, Defrost mode.

Humidity Control: Adjust between 35% and 85% in 5% increments. Fan Speed: HIGH for maximum dehumidification, LOW for quiet operation. Timer: Program on/off in 1-hour increments up to 24 hours. Filter Alert: Illuminates when filter needs cleaning (reset after cleaning). Auto-Defrost: Activates automatically when coil temperature drops below 41°F.

Connecting Drainage

Two drainage options: Manual bucket emptying or continuous hose drainage.

For bucket: Remove, empty, and replace when FULL light illuminates.
For continuous: Attach 5/8" ID garden hose to drain port (hose not included).
Route hose to floor drain or suitable outlet (downward slope required).
Ensure hose is not kinked or obstructed.

Tip: For basement use, continuous drainage is recommended.

Operation Modes

Supports multiple operating modes for different needs.

Auto Mode: Maintains set humidity automatically (default).
Continuous Mode: Runs continuously regardless of humidity (press and hold HUMIDITY for 3 seconds).
Dryer Mode: Fan runs continuously after compressor cycles off to dry internal components.
Timer Mode: Set specific on/off times for energy savings.
Sleep Mode: Reduces display brightness and fan noise during nighttime operation.

WARNING! Do not operate below 41°F without optional low-temperature kit.

Maintenance

Regular maintenance ensures optimal performance and longevity.

Clean air filter every 2 weeks: Remove, wash with mild detergent, dry completely.
Reset filter indicator: Press and hold FILTER button for 3 seconds after cleaning.
Clean water bucket monthly: Use mild solution to prevent mold/mildew.
Check drain hose: Monthly for clogs or kinks (continuous drainage).
Clean exterior: Wipe with damp cloth only.

CAUTION! Unplug unit before any maintenance.

Care & Cleaning

Unplug before cleaning. Use only damp cloth for exterior; no abrasive cleaners.

Annual Maintenance: Have qualified technician check refrigerant charge and electrical components.

Storage: Empty bucket, clean unit, coil dry, store in upright position in dry area.

Regulatory Information

UL Listed: Meets UL 474 safety standards. Energy Star: Certified for energy efficiency. EPA: Refrigerant compliant with EPA regulations. Copyright © Frigidaire. For support, visit www.frigidaire.com or contact 1-800-374-4432. This product contains chemicals known to cause cancer and birth defects (California Proposition 65).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not running	Power/Bucket full	Check power connection; empty bucket; reset circuit breaker.
Low dehumidification	Filter/Temperature	Clean filter; ensure room temperature above 41°F; check for air obstructions.
Water leakage	Hose/Bucket	Check hose connections; ensure bucket properly seated; level unit.
Loud noise	Vibration/Obstruction	Place on level surface; check for foreign objects in fan area.
Display not working	Power/Control	Unplug for 5 minutes then restart; check for error codes.
Ice on coils	Low temperature	Auto-defrost should activate; move to warmer area if persistent.

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com