Frigidaire FAD704DUD17 Dehumidifier Manual

The Frigidaire FAD704DUD17 is a 70-pint dehumidifier designed for medium to large rooms, featuring electronic controls with humidistat, continuous drain option, automatic restart, washable filter, and turbo mode for faster moisture removal. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Storage Instructions 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, built-in humidistat, removable water bucket with full bucket alert, continuous drain port, washable air filter, caster wheels for mobility.

FeatureDescription
Capacity70 pints per day (at 60°F, 60% RH)
Electronic ControlsDigital display with humidistat settings
Water BucketRemovable with handle and full indicator
Continuous DrainHose connection for unattended operation
Auto RestartResumes previous settings after power outage
Turbo ModeHigh-speed fan for faster dehumidification
Filter IndicatorReminder to clean the washable filter
WheelsFour caster wheels for easy room-to-room movement
Auto DefrostPrevents coil freezing in low temperatures
Energy Star CertifiedMeets energy efficiency guidelines

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

  1. Choose location: Place in center of room away from walls/furniture for optimal airflow.
  2. Check clearance: Ensure at least 12 inches of space on all sides.
  3. Level surface: Use on hard floor; avoid carpets that block bottom air intake.
  4. Set up drainage: For continuous drain, attach hose to drain port and route to floor drain.
  5. Plug into dedicated 115V AC outlet.

WARNING! Do not use in temperatures below 41°F (5°C). Ensure proper ventilation around unit.

First-Time Setup

Plug in unit; follow control panel prompts.

  1. Initial power: Unit beeps and display lights up.
  2. Set humidistat: Press HUMIDISTAT button to desired humidity level (35%-85%).
  3. Select fan speed: Choose LOW (quiet) or TURBO (fast) with FAN button.
  4. Bucket check: Ensure empty bucket is properly seated.
  5. Continuous drain: If using hose, ensure secure connection and clear path.

CAUTION! Handle with care; unit is heavy. Use wheels to move, not by lifting.

Specifications

Controls and Settings

Control Panel: POWER button, HUMIDISTAT (+/-), FAN (LOW/TURBO), FILTER indicator, BUCKET FULL indicator.

Display: Current humidity %, set point, fan icon, filter alert, bucket full alert.

Humidistat: Set desired humidity level (35%-85%). Unit cycles on/off automatically to maintain set point. Fan Speed: LOW for quiet operation, TURBO for maximum moisture removal. Auto Restart: After power outage, resumes previous settings. Auto Defrost: Activates automatically when coil temperature drops below 41°F.

Operation Modes

Normal Mode: Set humidistat; unit runs until set humidity is reached. Continuous Mode: Set humidistat to lowest setting (35%) for constant operation. Turbo Mode: Press FAN button for high-speed dehumidification.

  1. Press POWER to turn on.
  2. Set desired humidity with HUMIDISTAT buttons.
  3. Select fan speed with FAN button.
  4. Unit runs until bucket is full or set humidity is reached.
  5. For continuous drain, connect hose and unit will run indefinitely.

Tip: Close windows and doors in room for most efficient operation.

Maintenance & Cleaning

Unplug unit before any maintenance.

  1. Empty bucket: When FULL light comes on, remove and empty bucket.
  2. Clean bucket: Wash with mild detergent monthly to prevent mold.
  3. Filter cleaning: Remove filter every 2 weeks; wash with warm water and let dry completely.
  4. Exterior cleaning: Wipe cabinet with damp cloth; do not use harsh chemicals.
  5. Coil inspection: Check evaporator coil annually for dust; vacuum if needed.

WARNING! Never operate without filter. Ensure bucket is properly seated after cleaning.

Storage Instructions

For long-term storage (e.g., winter months):

  1. Unplug unit and wait 10 minutes.
  2. Empty and clean water bucket thoroughly.
  3. Clean filter and let dry completely.
  4. Wrap power cord neatly around cord wraps.
  5. Store in upright position in dry, covered area.
  6. Cover unit to prevent dust accumulation.

CAUTION! Do not store unit on its side or upside down.

Safety Information

Important safety precautions:

Regulatory Information

UL Listed: Meets safety standards. Energy Star Certified: Meets EPA energy efficiency requirements. FCC Part 15: Class B digital device; complies with interference limits. California Proposition 65 Warning: This product contains chemicals known to cause cancer and birth defects. For support, visit www.frigidaire.com or contact 1-800-374-4432.

Troubleshooting

SymptomPossible CauseCorrective Action
Unit not turning onNo powerCheck outlet; ensure plug is fully inserted; check circuit breaker.
Not removing moistureRoom too coldEnsure room temperature above 41°F; check for auto defrost cycle.
Bucket full light on (empty bucket)Bucket not seated properlyRemove and reinsert bucket; check for obstructions.
Loud noise/vibrationUneven surfacePlace on level floor; check for loose parts.
Filter light onDirty filterClean filter according to instructions.
Water leakingBucket overflow/drain hose issueEmpty bucket; check drain hose connection; ensure unit is level.
Frost on coilsLow temperatureUnit will auto defrost; move to warmer area if persistent.

Reset: Unplug for 10 minutes, then restart.

Service: 1-800-374-4432; www.frigidaire.com

Frigidaire FAD704DUD17 Dehumidifier Manual © - All Rights Reserved 2025