Frigidaire FAD704DUD14 Dehumidifier Manual

The Frigidaire FAD704DUD14 is a 70-pint capacity dehumidifier designed for residential use. It features electronic controls with a digital display, automatic humidity control, continuous drain option, washable filter, full bucket alert with auto shut-off, and a 24-hour timer. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Drain Hose 7. Operating Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, water collection bucket, washable air filter, continuous drain port, casters for mobility.

Feature	Description
Capacity	70 pints per day (at 60°F, 90% RH)
Control Panel	Digital display with touch controls
Humidity Control	Auto humidity set from 35% to 85%
Timer	24-hour on/off programmable timer
Bucket Full Alert	Indicator light and auto shut-off
Continuous Drain	Option for hose connection
Filter	Washable anti-microbial air filter
Mobility	Four swivel casters
Power Cord	6-foot cord with plug
Dimensions	Approx. 15.4" W x 11.4" D x 24.3" H

Installation

Unpack and inspect contents. Place on level, stable surface.

Positioning: Place unit at least 12 inches from walls and furniture for proper airflow.
Check filter: Ensure washable filter is properly installed.
Power connection: Plug into a dedicated 115V AC, 60Hz outlet.
Bucket installation: Ensure empty bucket is correctly seated.

WARNING! Do not use extension cords. Ensure outlet is properly grounded.

First-Time Setup

Plug in unit; control panel will illuminate.

Set humidity level: Press HUMIDITY SET button, use arrows to select desired level (recommended 45-50%).
Select fan speed: Press FAN button to choose HIGH or LOW speed.
Timer setup (optional): Press TIMER button to program on/off times.
Continuous drain: Connect hose if desired (see Section 7).

CAUTION! Operate only in temperatures between 41°F and 90°F.

Specifications

Model: FAD704DUD14
Dehumidification Capacity: 70 pints/day (AHAM at 60°F/90% RH)
Power Supply: 115V AC, 60Hz, 6.5A
Refrigerant: R410A
Water Bucket Capacity: 16.9 pints
Air Flow: 188 CFM (High Speed)
Operating Temperature: 41°F to 90°F
Noise Level: Approx. 51 dB
Weight: 46.3 lbs

Controls and Settings

Control Panel: POWER button, HUMIDITY SET, FAN speed, TIMER, FILTER ALERT reset.

Display Indicators: Current humidity, set humidity, fan speed, timer status, bucket full, filter alert.

Humidity Control: Set between 35% and 85%. Unit cycles automatically to maintain set point. Fan Speed: HIGH for maximum moisture removal, LOW for quiet operation. Timer: Program unit to turn on/off up to 24 hours in advance. Filter Alert: Light illuminates when filter needs cleaning (approx. every 250 hours).

Connecting Drain Hose

For continuous operation without emptying bucket.

Turn off and unplug unit.
Remove bucket and locate drain port on back.
Insert garden hose (5/8" inner diameter) into port.
Route hose to floor drain or suitable outlet.
Replace bucket (unit will not operate without bucket in place).

Tip: Ensure hose has a downward slope to prevent water backup.

Operating Modes

Normal Mode: Set desired humidity, fan speed. Unit runs until humidity is reached, then cycles. Continuous Mode: Set humidity to lowest setting (35%) for continuous operation. Timer Mode: Set to turn on/off at specific times. Auto Restart: After power outage, unit resumes previous settings automatically.

Power On: Press POWER button.
Set Parameters: Adjust humidity, fan speed as needed.
Monitor: Check display for current room humidity.
Empty Bucket: When FULL indicator lights, remove and empty bucket.

WARNING! Do not operate without filter or bucket properly installed.

Maintenance

Filter Cleaning: Clean every 2-4 weeks or when FILTER light illuminates.

Unplug unit.
Remove filter from front grille.
Vacuum or rinse with warm water (no detergents).
Let dry completely before reinstalling.
Press and hold FILTER button for 3 seconds to reset alert.

Bucket Cleaning: Empty and clean bucket with mild detergent monthly.

Care & Cleaning

Unplug before any cleaning. Wipe exterior with soft, damp cloth. Do not use abrasive cleaners. Clean air intake and outlet grilles with vacuum brush attachment.

CAUTION! Never immerse unit in water. Do not use near flammable vapors.

Regulatory Information

This appliance complies with FCC Part 15. UL listed. For your safety and to ensure performance, all repairs should be done by an authorized service technician. Copyright © Frigidaire. For support, visit www.frigidaire.com or contact 1-800-374-4432.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	No power, bucket not in place	Check plug, outlet; ensure bucket is properly seated.
Low moisture removal	Dirty filter, low temperature	Clean filter; ensure room temp above 41°F.
Bucket full light on (bucket empty)	Float stuck, sensor issue	Check bucket alignment; clean float area.
Unusual noise	Loose parts, fan obstruction	Ensure unit is level; check for debris near fan.
Error code on display	Sensor fault, system error	Unplug for 10 minutes, then restart. If persists, call service.

Reset: Unplug for 10 minutes to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com