The Frigidaire FAD704DUD13 is a 70-pint dehumidifier designed for medium to large rooms, featuring electronic controls, a continuous drain option, auto-restart, a 24-hour timer, washable filter, and a full bucket alert with auto-shutoff. It operates on 115V AC, 60Hz, and is Energy Star certified. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.
Key components: Electronic control panel, removable water bucket, washable air filter, continuous drain hose connection, casters for mobility, and humidity sensor.
| Feature | Description |
|---|---|
| Capacity | 70 pints per day (at 60°F, 90% RH) |
| Electronic Controls | Digital display with touchpad operation |
| Humidity Control | Adjustable from 35% to 85% relative humidity |
| Continuous Drain | Garden hose connection for unattended operation |
| Auto Restart | Resumes previous settings after power interruption |
| 24-Hour Timer | Program on/off cycles |
| Full Bucket Alert | Indicator light and auto-shutoff when bucket is full |
| Washable Filter | Removable filter for easy cleaning |
| Energy Star Certified | Energy efficient operation |
| Casters | Four wheels for easy mobility |
Unpack and inspect contents. Place on level, stable surface.
WARNING! Do not place near heat sources or in direct sunlight. Ensure the unit is upright for at least 24 hours before first use if transported on its side.
Plug in the dehumidifier; the control panel will illuminate.
CAUTION! Handle the water bucket carefully to avoid spills. Do not operate without the filter installed.
Access all functions via the electronic control panel on top of the unit.
Control Panel: POWER, MODE (Continuous/Auto/Custom), HUMIDITY SET (Up/Down arrows), FAN SPEED (High/Medium/Low), TIMER, FILTER RESET indicator, BUCKET FULL indicator.
Modes: CONTINUOUS (runs until turned off), AUTO (maintains set humidity), CUSTOM DRY (user-defined cycle). Fan Speed: Adjusts airflow and noise level. Timer: Set to turn unit On or Off after 1-24 hours. Alerts: FILTER light indicates when to clean the filter; BUCKET FULL light and audible alert when bucket needs emptying.
Select the mode best suited for your needs.
Tip: For energy efficiency, use Auto Mode with a humidity setting between 45% and 55%.
Unplug the unit before performing any maintenance.
WARNING! Never immerse the unit in water. Do not operate without the filter, as this can damage the coil.
Two methods for removing collected water.
CAUTION! For continuous drain, ensure the hose is not kinked and the drain path is clear to prevent overflow.
This appliance complies with FCC Part 15 Subpart B for Class B digital devices. Operation is subject to conditions that it does not cause harmful interference. Copyright © Frigidaire. Frigidaire is a trademark of AB Electrolux. For support, visit www.frigidaire.com or contact customer service at 1-800-374-4432.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Unit does not start | No power, full bucket, timer set | Ensure plug is secure; empty bucket; check timer settings. |
| Reduced moisture removal | Dirty filter, low temps, room size | Clean filter; ensure room temp is above 41°F; check if room is too large. |
| Unit runs constantly | Set to Continuous mode, high humidity | Switch to Auto mode; check for water leaks increasing humidity. |
| Water on floor | Bucket not seated, hose leak | Remove and reinsert bucket firmly; check hose connections. |
| Loud or unusual noise | Loose parts, debris in fan | Ensure unit is on level surface; check for obstructions; contact service. |
| FILTER light is on | Air filter needs cleaning | Clean filter as per instructions; press and hold FILTER button for 3 seconds to reset. |
Reset: Unplug unit for 5 minutes, then plug back in to reset electronic controls.
Service: 1-800-374-4432; www.frigidaire.com. Have model number (FAD704DUD13) ready.