Frigidaire FAD704DUD Dehumidifier Manual

The Frigidaire FAD704DUD is a high-capacity 70-pint dehumidifier designed for large rooms up to 1400 sq. ft. It features electronic controls, a continuous drain option, automatic restart, a 24-hour timer, a washable air filter, and a full tank alert with auto shut-off. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic control panel with digital display, 70-pint moisture removal capacity, washable filter, continuous drain hose connection, built-in carrying handles, and caster wheels for mobility.

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

1. Positioning: Place unit on a level floor, at least 12 inches away from walls and furniture for proper airflow.
2. Clearance: Ensure top and front air vents are unobstructed.
3. Ambient Temperature: Operate between 41°F (5°C) and 95°F (35°C).
4. Power Connection: Plug directly into a grounded 115V AC outlet. Do not use an extension cord.

WARNING! Do not place in closets or confined spaces. Ensure the room temperature is above 41°F to prevent coil frost.

First-Time Setup

Plug in the unit; the control panel will illuminate.

1. Install Drain Hose (Optional): For continuous drainage, attach a standard garden hose (¾”) to the drain port at the back.
2. Set Humidity Level: Press the HUMIDITY SET button to select desired level (35% - 85%).
3. Select Fan Speed: Choose between HIGH (faster dehumidification) or LOW (quieter operation).
4. Check Filter: Ensure the washable filter is clean and properly installed.
5. Bucket Placement: Ensure the water collection bucket is correctly seated.

CAUTION! Handle the unit with care; use the built-in handles. Do not tilt or invert with water in the bucket.

Specifications

• Model: FAD704DUD
• Capacity: 70 pints per day (AHAM at 80°F/60% RH)
• Coverage: Up to 1400 sq. ft.
• Power Supply: 115V, 60Hz
• Amperage: 5.5 Amps
• Water Tank Capacity: 16 pints (removable bucket)
• Operating Temperature: 41°F to 95°F (5°C to 35°C)
• Fan Speeds: 2 (High, Low)
• Dimensions (HxWxD): Approx. 23.6" x 15.4" x 11.4"
• Weight: Approx. 41 lbs
• Refrigerant: R410A

Controls and Settings

Access all functions via the electronic control panel on top of the unit.

Control Panel: POWER button, HUMIDITY SET buttons (+/-), FAN SPEED button, TIMER button, FILTER RESET indicator, FULL bucket indicator.

Humidity Control: Set target humidity from 35% to 85% in 5% increments. Fan Speed: Select HIGH for maximum moisture removal or LOW for quiet operation. Timer: Program the unit to turn ON or OFF after 1-24 hours. Filter Alert: FILTER RESET light illuminates when the air filter needs cleaning. Full Tank Alert: Light and audible alert when bucket is full; unit auto shuts off.

Operation Modes

Standard Mode: Runs continuously until target humidity is reached, then cycles on/off to maintain it. Continuous Mode: Press and hold the HUMIDITY SET button for 3 seconds to run continuously regardless of humidity (drain hose required). Timer Mode: Set delayed start or shut-off for energy savings.

1. Press POWER to turn on.
2. Set desired humidity level.
3. Select fan speed.
4. For continuous drain, attach hose and select Continuous Mode if desired.
5. Monitor water level; empty bucket when FULL light comes on.

Tip: Close windows and doors in the room for most efficient operation.

Maintenance & Cleaning

Unplug unit before any maintenance.

1. Cleaning the Air Filter: Remove filter every 2 weeks or as needed. Rinse under warm water, let dry completely, and reinstall.
2. Resetting Filter Alert: After cleaning, press and hold the FAN SPEED button for 3 seconds to reset the FILTER light.
3. Emptying the Water Bucket: Pull bucket straight out, carry by handle, pour water down drain. Replace securely.
4. Cleaning the Bucket: Wash with mild detergent and water to prevent mold/mildew.
5. Exterior Cleaning: Wipe cabinet with a soft, damp cloth. Do not use harsh chemicals.

WARNING! Never operate without the filter or with a wet filter. Do not immerse any part of the unit in water.

Drainage Options

Bucket Drainage: Use the removable 16-pint bucket. Empty when FULL light activates. Continuous Drainage: For unattended operation, attach a standard ¾” garden hose (not included) to the rear drain port. Ensure hose runs downward to a floor drain or sink.

Care & Storage

For long-term storage (e.g., winter):

1. Unplug the unit.
2. Empty and clean the water bucket. Let dry.
3. Clean the air filter and let dry.
4. Run the unit in Fan Only mode (if available) for 30 minutes in a warm room to dry internal components.
5. Coil and secure the power cord. Store upright in a dry location.

CAUTION! Do not store with water in the bucket or lines. Protect from dust and extreme temperatures.

Regulatory Information

This appliance complies with FCC Part 15 Class B digital device limits. Manufactured for Frigidaire. Copyright and trademarks owned by Electrolux Home Products, Inc. For support, visit www.frigidaire.com or contact customer service at 1-800-374-4432.

Troubleshooting

Reset: Unplug for 60 seconds, then plug back in to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com