Frigidaire FAD504TDB1 Dehumidifier Manual

The Frigidaire FAD504TDB1 is a 50-pint capacity dehumidifier designed for medium to large rooms, featuring electronic controls, a continuous drain option, automatic restart, washable filter, and adjustable humidity settings. It operates on 115V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic control panel, Water tank with full indicator, Continuous drain hose connection, Washable air filter, Carrying handles, Cord storage.

Installation & Placement

Unpack and inspect contents. Choose appropriate location.

1. Clear area: Ensure at least 12 inches of clearance on all sides for proper airflow.
2. Level surface: Place on flat, stable surface to prevent tipping.
3. Temperature range: Operate between 41°F (5°C) and 95°F (35°C).
4. Power connection: Plug directly into 115V grounded outlet; avoid extension cords.
5. Drain setup: Position near floor drain or prepare water collection bucket.

WARNING! Do not place near heat sources or in direct sunlight. Ensure proper ventilation.

First-Time Setup

Plug in unit; allow upright position for 24 hours if transported horizontally.

1. Install filter: Ensure washable filter is properly seated in front grille.
2. Set humidity: Press HUMIDITY button to select desired level (start at 50%).
3. Select mode: Choose between Normal, Turbo, or Continuous operation.
4. Set timer: Program 24-hour timer if desired for automatic operation.
5. Check drain: Install drain hose if using continuous drain option.

CAUTION! Handle with care; unit contains refrigerant. Do not tilt during operation.

Specifications

• Model: FAD504TDB1
• Capacity: 50 pints per day (at AHAM conditions)
• Coverage Area: Up to 1500 sq. ft. in moderate humidity
• Power: 115V AC, 60Hz, 4.5 Amps
• Water Tank: 1.8 gallon capacity with handle
• Noise Level: 51 dB on normal setting
• Dimensions: 15.4" W × 11.0" D × 19.7" H
• Weight: 36.6 lbs
• Refrigerant: R-410A
• Certifications: ENERGY STAR® qualified, ETL listed

Controls and Settings

Control Panel: POWER, MODE, HUMIDITY, TIMER, FILTER RESET, TURBO.

Display Indicators: Current humidity, Set humidity, Timer, Full tank, Filter clean, Turbo mode.

Humidity Settings: Adjust from 35% to 85% in 5% increments. Modes: Normal (energy efficient), Turbo (maximum dehumidification), Continuous (runs until tank full). Timer: Program 1-24 hours for automatic start/stop. Filter Alert: Illuminates when filter needs cleaning (approximately every 250 hours).

Operation Modes

Normal Mode: Energy-efficient operation for maintaining set humidity. Turbo Mode: Maximum moisture removal for high humidity conditions. Continuous Mode: Runs continuously until tank is full (bypasses humidity setting).

1. Press POWER to turn unit on.
2. Select MODE to cycle through Normal, Turbo, or Continuous.
3. Adjust humidity setting using HUMIDITY buttons.
4. Monitor current humidity reading on display.
5. Unit will cycle on/off automatically to maintain set humidity level.

Tip: For fastest results, close windows and doors during operation.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Clean filter: Remove and wash with warm, soapy water every 2-4 weeks.
2. Dry filter: Allow filter to air dry completely before reinstalling.
3. Reset filter light: Press and hold FILTER button for 3 seconds after cleaning.
4. Clean exterior: Wipe with soft, damp cloth; never use abrasive cleaners.
5. Clean water tank: Empty and clean with mild detergent monthly.
6. Check coils: Keep condenser coils free of dust and debris.

WARNING! Always unplug unit before cleaning. Do not immerse in water.

Draining Options

Bucket Method: Unit automatically shuts off when tank is full (indicator light illuminates).

1. Remove tank by pulling straight out.
2. Carry tank using integrated handle.
3. Empty water down drain.
4. Replace tank securely until it clicks.
5. Unit will resume operation automatically.

Continuous Drain: Connect 5/8" ID garden hose to drain outlet.

1. Ensure hose runs downward without kinks.
2. Direct to floor drain, sump pump, or suitable outlet.
3. Remove water tank during continuous drain operation.
4. Check periodically for proper drainage.

Care & Storage

Off-season storage preparation:

1. Unplug unit and allow to sit upright for 24 hours.
2. Empty and clean water tank thoroughly.
3. Clean air filter and allow to dry completely.
4. Wrap power cord around cord storage hooks.
5. Store in cool, dry place protected from dust.
6. Cover unit to prevent dust accumulation.

CAUTION! Store in upright position. Do not place heavy items on top.

Regulatory Information

FCC Compliance: This device complies with Part 15 of FCC Rules. ENERGY STAR®: Meets strict energy efficiency guidelines. ETL Listed: Tested to UL standards. Refrigerant: Contains R-410A. For technical support or service, visit www.frigidaire.com or contact 1-800-374-4432. This product should be recycled according to local regulations.

Troubleshooting

Reset: Unplug for 10 minutes to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com