Frigidaire FAD301NUE11 Dehumidifier Manual

The Frigidaire FAD301NUE11 is a 30-pint capacity dehumidifier designed for medium-sized rooms up to 1500 sq. ft. It features an Energy Star certification, automatic humidity control, continuous drain option, washable air filter, full bucket alert with auto-shutoff, and electronic controls with digital display. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Drainage Options 9. Energy Saving Tips 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, 1.8-gallon water bucket, washable air filter, continuous drain hose connection, casters for mobility, and digital humidity display.

Feature	Description
Capacity	30 pints per day (at 80°F, 60% RH)
Coverage Area	Up to 1500 square feet
Humidity Control	Automatic with adjustable set point (35%-85%)
Water Bucket	1.8-gallon capacity with full bucket alert and auto-shutoff
Continuous Drain	Garden hose connection for unattended operation
Air Filter	Washable mesh filter for improved air quality
Controls	Electronic touchpad with digital display
Energy Rating	Energy Star certified for efficiency
Mobility	Four swivel casters for easy movement
Operating Temp	41°F to 90°F (5°C to 32°C)

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

Remove all packaging materials and tape.
Position unit: Place on level floor with at least 12-18 inches clearance on all sides for proper airflow.
Check filter: Ensure washable air filter is properly installed.
Install casters: Attach all four swivel casters to bottom of unit.
Choose drainage: Decide between bucket collection or continuous drain hose.

WARNING! Do not operate in temperatures below 41°F (5°C). Ensure unit is upright for at least 24 hours before first use if transported on its side.

First-Time Setup

Plug into dedicated 115V outlet; follow initial setup steps.

Power on: Plug into grounded outlet, press POWER button.
Set humidity: Use UP/DOWN arrows to set desired humidity level (recommended 45-50%).
Select mode: Choose between CONTINUOUS or AUTO mode.
Check bucket: Ensure water bucket is properly seated and empty.
Test operation: Allow unit to run for 15 minutes to ensure proper operation.

CAUTION! Use only grounded outlet. Do not use extension cord. Keep cord away from heat sources.

Specifications

Model: FAD301NUE11
Capacity: 30 pints per day (AHAM verified)
Coverage: 1500 sq. ft. in moderate conditions
Water Bucket: 1.8 gallons (6.8 liters)
Power: 115V, 60Hz, 3.7 Amps
Energy Consumption: 300 Watts (approx.)
Noise Level: 51 dB on low setting
Refrigerant: R410A
Dimensions: 15.4" W × 11.4" D × 19.7" H
Weight: 33.5 lbs
Warranty: 1-year full, 5-year sealed system

Controls and Settings

Electronic control panel with digital display and touchpad controls.

Display Indicators: Current humidity, set point, filter alert, full bucket, compressor delay.

Control Buttons: POWER, HUMIDITY SET (UP/DOWN), MODE (Continuous/Auto), FILTER RESET, TIMER (1-24 hours).

Settings: Humidity control (35%-85% adjustable), Fan speed (High/Low), Timer (auto shut-off), Continuous mode (runs constantly), Auto mode (cycles based on humidity).

Operation Modes

Two main operating modes for different needs.

Auto Mode: Unit cycles on/off automatically to maintain set humidity level. Most energy-efficient setting.
Continuous Mode: Runs continuously regardless of humidity level. Use for rapid moisture removal.
Fan Only: Circulates air without dehumidifying. Available when compressor is off.
Timer Function: Set 1-24 hour shut-off timer for scheduled operation.

Tip: For normal conditions, use Auto mode at 45-50% humidity for optimal efficiency.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Daily: Check and empty water bucket as needed.
Weekly: Inspect air filter; clean if dirty.
Monthly: Clean exterior with soft, damp cloth.
Seasonally: Deep clean before storage; clean coils and interior.
Annually: Check overall condition before heavy use season.

WARNING! Always unplug unit before cleaning. Never use harsh chemicals or abrasives.

Drainage Options

Two methods for water removal: bucket collection or continuous drain.

Bucket Method:

Ensure bucket is properly seated.
Unit will auto-shutoff when bucket is full (indicator light illuminates).
Remove bucket by lifting handle, empty, and replace.
Unit resumes operation automatically.

Continuous Drain:

Remove bucket and drain plug from back of unit.
Attach standard garden hose (not included) to drain outlet.
Route hose to floor drain, sink, or sump pump.
Ensure downward slope for proper drainage.

Energy Saving Tips

Use Auto mode instead of Continuous mode when possible.
Set humidity to 45-50% rather than lower settings.
Keep doors and windows closed during operation.
Clean air filter monthly for optimal airflow.
Use in appropriately sized space (up to 1500 sq. ft.).
Place away from heat sources and direct sunlight.
Use timer function to run only when needed.
Consider continuous drain to avoid energy used for bucket alerts.

Regulatory Information

UL Listed. Energy Star certified. Complies with FCC Part 15 Class B. This product contains R410A refrigerant. For disposal, consult local regulations. Copyright © Frigidaire. Frigidaire is a trademark of Electrolux Home Products, Inc. For support, visit www.frigidaire.com or contact 1-800-374-4432.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not turning on	No power	Check outlet; ensure plug is secure; test outlet with another device.
Not removing moisture	Low temperature	Ensure room temp is above 41°F; check humidity setting.
Bucket full light on (empty bucket)	Bucket not seated properly	Remove and reinsert bucket; check for obstructions.
Filter light illuminated	Dirty filter	Clean washable filter with warm water; let dry completely.
Ice on coils	Low temperature or dirty filter	Turn off; let ice melt; clean filter; ensure temp above 41°F.
Loud noise/vibration	Uneven surface or loose parts	Place on level surface; check for loose panels or foreign objects.
Water leakage	Improper bucket placement or clogged drain	Check bucket seating; clear drain hose of obstructions.
Display not working	Power issue	Unplug for 5 minutes; plug back in; if persists, contact service.

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com