Frigidaire FAD301NUD17 Dehumidifier Manual

The Frigidaire FAD301NUD17 is a 30-pint capacity dehumidifier designed for medium-sized rooms up to 500 sq. ft. It features an Energy Star certification, automatic humidity control with digital readout, continuous drain option, washable filter, auto-restart after power interruption, and a 24-hour timer. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation 7. Maintenance 8. Care & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital humidity display and controls, water collection bucket, washable air filter, continuous drain hose connection, casters for mobility, and power cord.

FeatureDescription
Capacity30 pints per day (at 60°F, 90% RH)
Coverage AreaUp to 500 square feet
Energy Star CertifiedEnergy efficient operation
Digital ControlsElectronic touchpad with digital humidity readout
Automatic Humidity ControlSet desired humidity level (35% - 85%)
Continuous Drain OptionHose connection for unattended operation
Washable FilterRemovable, washable air filter
Auto RestartResumes previous settings after power outage
24-Hour TimerProgram on/off times
Full Bucket AlertIndicator light and auto shut-off when bucket is full

Installation

Unpack and inspect contents. Place on level, stable surface.

  1. Positioning: Place unit on a level floor with at least 12-18 inches of clearance on all sides for proper airflow.
  2. Check filter: Ensure the washable filter is properly installed.
  3. Continuous drain setup (optional): Connect 5/8" inner diameter garden hose to drain port at back of unit. Route hose to floor drain or suitable outlet.
  4. Plug into grounded 115V AC power outlet.

WARNING! Do not use extension cords. Ensure unit is upright for at least 24 hours before first use if it was tilted during transport.

First-Time Setup

Plug in unit; control panel will illuminate.

  1. Set humidity level: Press the HUMIDITY button to set desired level (recommended 45-50% for comfort).
  2. Select fan speed: Press FAN button to choose HIGH or LOW speed.
  3. Set timer (optional): Press TIMER button to program automatic on/off times.
  4. For continuous operation: Ensure drain hose is connected and bucket is in place. Unit will run until humidity set point is reached.

CAUTION! Do not operate without the water collection bucket properly installed.

Specifications

Controls and Settings

Control Panel: POWER button, HUMIDITY +/- buttons, FAN speed button, TIMER button, FILTER reset indicator, BUCKET FULL indicator.

Operation Modes: Normal dehumidification, Continuous mode (fan runs constantly), Laundry dry mode (accelerated drying).

Humidity Setting: Adjust between 35% and 85% in 5% increments. Fan Control: HIGH for maximum moisture removal, LOW for quiet operation. Timer: Program unit to turn on/off in 1-hour increments up to 24 hours. Filter Alert: FILTER light illuminates when filter needs cleaning (approximately every 250 hours of operation).

Operation

For normal dehumidification:

  1. Press POWER button to turn unit on.
  2. Set desired humidity level using HUMIDITY buttons.
  3. Select fan speed using FAN button.
  4. Unit will run until set humidity is reached, then compressor will cycle off while fan may continue to run.
  5. When bucket is full: BUCKET FULL light will illuminate and unit will shut off. Empty bucket and replace to resume operation.

Tip: For fastest dehumidification, close windows and doors in the room. Use HIGH fan speed.

Maintenance

Regular maintenance ensures optimal performance and longevity.

  1. Clean air filter: Remove filter every 2-4 weeks (or when FILTER light illuminates). Wash with warm, soapy water, rinse thoroughly, and dry completely before reinstalling.
  2. Empty water bucket: Empty bucket regularly or use continuous drain. Clean bucket periodically with mild detergent.
  3. Clean exterior: Wipe cabinet with soft, damp cloth. Do not use abrasive cleaners.
  4. End-of-season storage: Empty and clean bucket. Clean filter. Coil power cord. Store unit upright in a dry location.

WARNING! Always unplug unit before performing any maintenance.

Care & Cleaning

Unplug before cleaning. Use only mild detergent and damp cloth. Never immerse unit in water.

CAUTION! Do not use gasoline, solvents, or other chemicals for cleaning. Do not spray liquids directly on unit.

Regulatory Information

This appliance meets applicable safety standards. FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Frigidaire; trademarks of Electrolux Home Products, Inc. For support, visit www.frigidaire.com or contact 1-800-374-4432. This product contains refrigerant; dispose of according to local regulations.

Troubleshooting

SymptomPossible CauseCorrective Action
Unit does not startNo power, full bucket, timer setEnsure unit is plugged in; empty bucket; check timer settings.
Little or no water collectionRoom humidity low, filter dirty, cold room temperatureCheck room humidity; clean filter; unit operates best above 65°F.
Unit runs constantlyHumidity set too low, room very damp, continuous mode onSet humidity to 45-50%; allow time for dehumidification; check mode.
Water leakageBucket not seated properly, drain hose connection looseEnsure bucket is correctly installed; check hose connection.
Unusual noiseUnit not level, loose parts, fan hitting obstructionPlace on level surface; check for loose panels; ensure filter is clean and installed properly.
FILTER light onFilter needs cleaningClean filter as instructed; press and hold FILTER button for 3 seconds to reset.

Reset: Unplug unit for 5 minutes, then plug back in to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com

Frigidaire FAD301NUD17 Dehumidifier Manual © - All Rights Reserved 2025