Frigidaire FAD251NUE13 Dehumidifier Manual

The Frigidaire FAD251NUE13 is a 25-pint capacity dehumidifier designed for medium-sized rooms up to 500 sq ft. It features an Energy Star certification, automatic humidity control (35%-85% range), continuous drain option, auto-restart after power interruption, washable air filter, full bucket alert with auto shut-off, and 24-hour timer. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Control panel with digital display, Water collection bucket, Washable air filter, Continuous drain hose connection, Carrying handles, Cord storage.

Installation & Placement

Unpack and inspect contents. Choose proper location for optimal performance.

1. Place on level floor: Ensure unit is upright on flat, stable surface.
2. Clearance: Allow at least 12-18 inches of space around all sides for proper airflow.
3. Away from walls/furniture: Do not place directly against walls or furniture.
4. Room size: Use in rooms up to 500 square feet for best results.
5. Power connection: Plug directly into grounded 115V outlet; avoid extension cords.

WARNING! Do not place in areas with temperature below 41°F (5°C). Ensure proper drainage setup if using continuous drain option.

First-Time Setup

Power on dehumidifier; configure initial settings.

1. Install filter: Ensure washable air filter is properly seated in front grille.
2. Set humidity level: Press HUMIDITY button to set desired level (recommended 45-50%).
3. Select fan speed: Choose LOW or HIGH fan setting based on room conditions.
4. Set timer (optional): Program 24-hour timer for automatic operation.
5. Check bucket: Ensure water collection bucket is properly inserted and locked.

CAUTION! Handle with care when moving; use two people if necessary. Do not operate without air filter installed.

Specifications

• Model: FAD251NUE13
• Capacity: 25 pints per day (at 60°F/60% RH)
• Coverage Area: Up to 500 square feet
• Power Requirements: 115V, 60Hz, 3.5A
• Water Removal: 1.56 pints per kWh
• Operating Temperature: 41°F to 95°F (5°C to 35°C)
• Humidity Range: 35% to 85% relative humidity
• Fan Speeds: 2 (High/Low)
• Noise Level: 51 dB on low setting
• Dimensions: 15.4" W × 9.8" D × 19.9" H
• Weight: 30.9 lbs
• Refrigerant: R-410A

Controls and Settings

Control Panel: POWER button, HUMIDITY adjustment, FAN speed (HIGH/LOW), TIMER settings, FILTER reset indicator, FULL bucket indicator.

Display Icons: Current humidity, Set humidity, Fan speed, Timer status, Filter alert, Full bucket alert.

Humidity Control: Adjust between 35%-85% in 5% increments. Fan Settings: HIGH for maximum moisture removal, LOW for quiet operation. Timer: Program 1-24 hours for automatic start/stop. Filter Reset: Press and hold FILTER button for 3 seconds after cleaning. Continuous Mode: Set humidity to "CONT" for continuous operation regardless of room humidity.

Operation Modes

Normal Mode: Maintains set humidity level automatically. Continuous Mode: Runs continuously regardless of humidity. Laundry Mode: HIGH fan speed for faster drying in laundry areas. Timer Mode: Automatic on/off scheduling.

1. Press POWER to turn unit on.
2. Set desired humidity level using HUMIDITY buttons.
3. Select fan speed (HIGH or LOW).
4. For continuous operation, set humidity to "CONT" display.
5. Monitor water bucket; empty when FULL light illuminates.

Tip: Close windows and doors in room being dehumidified for best performance.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Clean air filter: Remove and wash with warm water every 2-4 weeks.
2. Empty water bucket: When FULL light comes on, remove and empty bucket.
3. Clean bucket: Wash with mild detergent monthly to prevent mold/mildew.
4. Clean exterior: Wipe with damp cloth; never use harsh chemicals.
5. Off-season storage: Empty completely, clean, and store in dry location.

WARNING! Always unplug unit before cleaning. Do not immerse in water or use abrasive cleaners.

Drainage Options

Bucket Collection: Standard method; empty when full. Continuous Drain: Connect hose (not included) for automatic drainage.

Continuous Drain Setup:

1. Remove bucket from unit.
2. Connect 5/8" ID hose to drain outlet at back of unit.
3. Route hose to floor drain or suitable drainage location.
4. Ensure hose has downward slope without kinks.
5. Replace bucket (unit will not operate without bucket properly seated).

CAUTION! Ensure continuous drain hose is properly connected to prevent leaks.

Energy Saving Tips

• Set humidity to 45-50% for optimal energy efficiency.
• Use timer to run during most humid parts of day.
• Keep doors and windows closed in dehumidified space.
• Clean filter regularly to maintain airflow efficiency.
• Use in appropriately sized rooms (not exceeding 500 sq ft).
• Consider continuous drain to avoid energy used for bucket full detection.

Regulatory Information

FCC Compliance: This device complies with Part 15 of FCC Rules. Energy Star: Meets ENERGY STAR guidelines for energy efficiency. UL Listed: Certified to UL standard 474. California Proposition 65 Warning: This product contains chemicals known to cause cancer and birth defects. For support, visit www.frigidaire.com or contact 1-800-374-4432. Copyright © Frigidaire. Frigidaire and the Frigidaire logo are registered trademarks of AB Electrolux.

Troubleshooting

Reset: Unplug for 5 minutes, then restart. If problems persist, contact service.

Service: 1-800-374-4432; www.frigidaire.com