Frigidaire FAD251NTB0 Dehumidifier Manual

The Frigidaire FAD251NTB0 is a 25-pint capacity dehumidifier designed for medium-sized rooms up to 1500 sq. ft. It features electronic controls with humidistat, continuous drain option, auto-restart after power interruption, washable filter, full bucket alert with auto shut-off, and caster wheels for easy mobility. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic control panel, 25-pint water bucket, washable air filter, continuous drain hose connection, humidistat, caster wheels, and handle.

Installation & Placement

Unpack and inspect contents. Place on level, stable surface.

1. Remove all packaging materials and tape.
2. Position unit: Place at least 12 inches from walls and furniture for proper airflow.
3. Check level: Ensure unit is level for proper bucket seating and operation.
4. Install drain hose (optional): Attach 5/8" ID hose to continuous drain port for permanent drainage.
5. Plug into grounded 120V AC outlet.

WARNING! Do not use extension cords. Ensure outlet is dedicated and properly grounded.

First-Time Setup

Power on dehumidifier; follow initial setup steps.

1. Insert water bucket: Ensure bucket is properly seated and locked in place.
2. Set humidity level: Press HUMIDITY button to set desired RH percentage (recommended 45-50%).
3. Select fan speed: Choose between HIGH or LOW fan setting.
4. Enable continuous mode: Press CONTINUOUS button for maximum dehumidification.
5. Check filter: Verify filter is clean before first use.

CAUTION! Handle bucket with care to avoid spills. Empty before moving unit.

Specifications

• Model: FAD251NTB0
• Dehumidification Capacity: 25 pints per day (at 80°F, 60% RH)
• Coverage Area: Up to 1500 sq. ft.
• Power Requirements: 115V, 60Hz, 3.5A
• Water Bucket Capacity: 1.6 gallons (25 pints)
• Air Flow: 165 CFM (High speed)
• Operating Temperature: 41°F to 95°F
• Dimensions: 15.4" W x 11.4" D x 19.9" H
• Weight: 30.9 lbs
• Refrigerant: R-410A

Controls and Settings

Control Panel: POWER button, HUMIDITY adjustment (+/-), FAN speed (HIGH/LOW), CONTINUOUS mode, FILTER reset indicator, FULL BUCKET indicator.

Display: Current humidity percentage, set point, fan speed indicator, filter alert, bucket full alert.

Humidity Control: Adjust between 35% and 85% RH in 5% increments. Fan Speed: HIGH for maximum moisture removal, LOW for quiet operation. Continuous Mode: Runs continuously regardless of humidity level. Timer: Not available on this model. Filter Alert: Flashing FILTER light indicates need for cleaning (every 250 hours).

Operation Modes

Normal Operation: Unit runs until set humidity is reached, then cycles on/off automatically.

1. Press POWER to turn unit on.
2. Set desired humidity using HUMIDITY buttons.
3. Select fan speed (HIGH or LOW).
4. Unit will run until bucket is full or set humidity is reached.
5. For continuous operation, press CONTINUOUS button (indicator light will illuminate).

Tip: Close windows and doors for most efficient operation. Ideal room temperature is 65°F-80°F.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Empty water bucket: Remove and empty bucket when FULL indicator lights.
2. Clean bucket: Wash with mild detergent monthly to prevent mold/mildew.
3. Clean air filter: Remove filter every 2-4 weeks; wash with warm, soapy water; air dry completely before reinstalling.
4. Reset filter light: Press and hold FILTER button for 3 seconds after cleaning.
5. Clean exterior: Wipe with damp cloth; never use harsh chemicals or abrasives.
6. Check drain hose: Ensure continuous drain hose is clear of obstructions.

WARNING! Always unplug unit before cleaning. Never operate without filter installed.

Storage Instructions

Proper storage prevents damage during off-season periods.

1. Unplug unit and allow to sit upright for 24 hours.
2. Empty and thoroughly clean water bucket.
3. Clean air filter and allow to dry completely.
4. Wrap power cord around cord wraps.
5. Store in cool, dry place protected from dust.
6. Cover unit with plastic bag or original box if available.

CAUTION! Store upright. Do not place heavy items on top of unit.

Safety Information

Important safety precautions for proper use.

• Always plug into grounded 120V outlet.
• Do not use extension cords or power strips.
• Keep unit away from water sources and high humidity areas.
• Do not block air intake or exhaust grilles.
• Empty bucket before moving unit to prevent spills.
• Do not operate in temperatures below 41°F to prevent coil freezing.
• Keep children and pets away from unit and power cord.
• Service should be performed by qualified technician only.

Regulatory Information

This dehumidifier complies with FCC Part 15 Class B digital device requirements. Meets UL standard 474. Energy Star certified. Manufactured for Frigidaire. For support, visit www.frigidaire.com or contact 1-800-374-4432. Copyright © 2023 Frigidaire. All rights reserved.

Troubleshooting

Reset: Unplug unit for 5 minutes, then plug back in to reset electronic controls.

Service: 1-800-374-4432; www.frigidaire.com